[U-Boot] [RFC PATCH] Convert CONFIG_SYS_LOAD_ADDR to Kconfig

Adam Ford aford173 at gmail.com
Thu Jul 27 13:12:49 UTC 2017 

For ARCH_OMAP2PLUS ONLY (for now)
This converts the following to Kconfig:
   CONFIG_SYS_LOAD_ADDR

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/Kconfig b/Kconfig
index bb80ada..711d0c9 100644
--- a/Kconfig
+++ b/Kconfig
@@ -322,6 +322,12 @@ config SYS_EXTRA_OPTIONS
 	  configuration to Kconfig. Since this option will be removed sometime,
 	  new boards should not use this option.
 
+config SYS_LOAD_ADDR
+	depends on ARCH_OMAP2PLUS
+	hex "Load Address"
+	help
+	  TODO: Move CONFIG_SYS_LOAD_ADDR for all the architecture
+
 config SYS_TEXT_BASE
 	depends on ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
 		(M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 013586e..2c8c820 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,5 +1,8 @@
 if ARCH_OMAP2PLUS
 
+config SYS_LOAD_ADDR
+	default 0x82000000
+
 choice
 	prompt "OMAP2+ platform select"
 	default OMAP34XX
diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig
index 2102956..526a9fa 100644
--- a/configs/am3517_crane_defconfig
+++ b/configs/am3517_crane_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
 # CONFIG_SPL_GPIO_SUPPORT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_AM3517_CRANE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=10
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index eddeb5e..e5f3ede 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
 # CONFIG_SPL_GPIO_SUPPORT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_AM3517_EVM=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_ENV_IS_IN_NAND=y
diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index 4aded16..0d5f506 100644
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_AM33XX=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL_MMC_SUPPORT=y
diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig
index e128fb4..c0a99bf 100644
--- a/configs/brppt1_nand_defconfig
+++ b/configs/brppt1_nand_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_AM33XX=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL_SERIAL_SUPPORT=y
diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig
index 1e156ca..63d5f87 100644
--- a/configs/brppt1_spi_defconfig
+++ b/configs/brppt1_spi_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_AM33XX=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL_MMC_SUPPORT=y
diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig
index 3dac8a9..24bffa2 100644
--- a/configs/brxre1_defconfig
+++ b/configs/brxre1_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_AM33XX=y
 CONFIG_TARGET_BRXRE1=y
 CONFIG_SPL_MMC_SUPPORT=y
diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig
index ba76463..455a1df 100644
--- a/configs/cm_t35_defconfig
+++ b/configs/cm_t35_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_CM_T35=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig
index 4aed572..ff811be 100644
--- a/configs/cm_t54_defconfig
+++ b/configs/cm_t54_defconfig
@@ -39,8 +39,8 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ISO_PARTITION=y
 CONFIG_EFI_PARTITION=y
-CONFIG_MMC_OMAP_HS=y
 CONFIG_SCSI=y
+CONFIG_MMC_OMAP_HS=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 979f3ec..05507a4 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -45,6 +45,7 @@ CONFIG_SPL_REGMAP=y
 CONFIG_SYSCON=y
 CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_DM_SCSI=y
 CONFIG_DWC_AHCI=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
@@ -68,7 +69,6 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_REGULATOR_PALMAS=y
 CONFIG_DM_REGULATOR_LP873X=y
-CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 8292bdf..25261d8 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -48,6 +48,7 @@ CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SYSCON=y
 CONFIG_SPL_SYSCON=y
+CONFIG_DM_SCSI=y
 CONFIG_DWC_AHCI=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
@@ -71,7 +72,6 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_REGULATOR_PALMAS=y
 CONFIG_DM_REGULATOR_LP873X=y
-CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
diff --git a/configs/draco_defconfig b/configs/draco_defconfig
index 763e96b..6b22865 100644
--- a/configs/draco_defconfig
+++ b/configs/draco_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_AM33XX=y
 CONFIG_SYS_MPUCLK=300
 CONFIG_TARGET_DRACO=y
diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig
index 0bcc75b..92a44d8 100644
--- a/configs/eco5pk_defconfig
+++ b/configs/eco5pk_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_ECO5PK=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=10
diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
index ab3ef75..1b9d312 100644
--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_AM33XX=y
 CONFIG_SYS_MPUCLK=300
 CONFIG_TARGET_ETAMIN=y
diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig
index 5a9d7cc..f615417 100644
--- a/configs/mcx_defconfig
+++ b/configs/mcx_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
 # CONFIG_SPL_GPIO_SUPPORT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_MCX=y
 CONFIG_VIDEO=y
 CONFIG_ENV_IS_IN_NAND=y
diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig
index ef7d153..baf2ac4 100644
--- a/configs/mt_ventoux_defconfig
+++ b/configs/mt_ventoux_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_MT_VENTOUX=y
 CONFIG_VIDEO=y
 CONFIG_ENV_IS_IN_NAND=y
diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
index eb47bc1..81ecf22 100644
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_NOKIA_RX51=y
 CONFIG_VIDEO=y
 CONFIG_ENV_IS_NOWHERE=y
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index d7bbf2d..f6c2be1 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_OMAP3_EVM=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig
index c51309c..54bc0ec 100644
--- a/configs/omap3_ha_defconfig
+++ b/configs/omap3_ha_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_TAO3530=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA"
 CONFIG_ENV_IS_IN_NAND=y
diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig
index 635bdf7..d13d11c 100644
--- a/configs/omap5_uevm_defconfig
+++ b/configs/omap5_uevm_defconfig
@@ -33,10 +33,10 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ISO_PARTITION=y
+CONFIG_SCSI=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_MMC_OMAP_HS=y
-CONFIG_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
index ac2d4bb..6de236b 100644
--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_AM33XX=y
 CONFIG_SYS_MPUCLK=720
 CONFIG_TARGET_PXM2=y
diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig
index cc40f91..94509f8 100644
--- a/configs/rastaban_defconfig
+++ b/configs/rastaban_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_AM33XX=y
 CONFIG_SYS_MPUCLK=300
 CONFIG_TARGET_RASTABAN=y
diff --git a/configs/rut_defconfig b/configs/rut_defconfig
index 9220458..5fc4b40 100644
--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_AM33XX=y
 CONFIG_SYS_MPUCLK=600
 CONFIG_TARGET_RUT=y
diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig
index a572db2..10a079f 100644
--- a/configs/tao3530_defconfig
+++ b/configs/tao3530_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_TAO3530=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=3
diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig
index e4e99be..c4cd5a0 100644
--- a/configs/thuban_defconfig
+++ b/configs/thuban_defconfig
@@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_AM33XX=y
 CONFIG_SYS_MPUCLK=300
 CONFIG_TARGET_THUBAN=y
diff --git a/configs/ti814x_evm_defconfig b/configs/ti814x_evm_defconfig
index d314e50..8df9376 100644
--- a/configs/ti814x_evm_defconfig
+++ b/configs/ti814x_evm_defconfig
@@ -3,6 +3,7 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TI814X=y
 CONFIG_TARGET_TI814X_EVM=y
 CONFIG_SPL_MMC_SUPPORT=y
diff --git a/configs/twister_defconfig b/configs/twister_defconfig
index 7d80a41..929b6a8 100644
--- a/configs/twister_defconfig
+++ b/configs/twister_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 # CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
 CONFIG_TARGET_TWISTER=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_BOOTDELAY=10
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 77d9ba1..b760b62 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -183,10 +183,6 @@
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
-								/* address */
-
 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 26036c4..1bedf68 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -249,10 +249,6 @@
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
-								/* address */
-
 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 99d4800..8f8930e 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -190,10 +190,6 @@
 								/* works on */
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
-
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h
index 3fb6676..b0a6270 100644
--- a/include/configs/cm_t3517.h
+++ b/include/configs/cm_t3517.h
@@ -190,8 +190,6 @@
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0 + 0x02000000)
-
 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 73fdfbd..976573c 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -228,8 +228,6 @@
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
-								/* address */
 #define CONFIG_PREBOOT
 
 /*
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 9826514..2179279 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -350,9 +350,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
 
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
-
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 15eb08b..8c10cd0 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -118,9 +118,6 @@
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 						0x01F00000) /* 31MB */
 
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
-
 /* -----------------------------------------------------------------------------
  * Hardware drivers
  * -----------------------------------------------------------------------------
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index a9991fc..63d9978 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -112,9 +112,6 @@
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
-								/* address */
-
 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 38f5bd0..ae1eb6c 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -170,8 +170,6 @@
 #define CONFIG_SYS_MEMTEST_END		(0x83FFFFFF)		/* 64MB */
 #define CONFIG_SYS_MEMTEST_SCRATCH	(0x81000000)	/* dummy address */
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
 #define CONFIG_SYS_TEXT_BASE		0x80008000
 
 /*
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index ccd7cd7..2565a90 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -23,14 +23,6 @@
 #define CONFIG_INITRD_TAG
 
 /*
- * Our DDR memory always starts at 0x80000000 and U-Boot shall have
- * relocated itself to higher in memory by the time this value is used.
- * However, set this to a 32MB offset to allow for easier Linux kernel
- * booting as the default is often used as the kernel load address.
- */
-#define CONFIG_SYS_LOAD_ADDR		0x82000000
-
-/*
  * We setup defaults based on constraints from the Linux kernel, which should
  * also be safe elsewhere.  We have the default load at 32MB into DDR (for
  * the kernel), FDT above 128MB (the maximum location for the end of the
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index a0fd583..f4e1cd8 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -228,8 +228,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
 					0x07000000) /* 112 MB */
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0 + 0x02000000)
-
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
-- 
2.7.4

More information about the U-Boot mailing list