[U-Boot] [PATCH v4 02/29] Move environment files from common/ to env/

Simon Glass sjg at chromium.org
Mon Jul 31 14:46:02 UTC 2017


About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Tom Rini <trini at konsulko.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 Kconfig                                   |   2 +
 Makefile                                  |   1 +
 arch/sh/cpu/u-boot.lds                    |   4 +-
 board/freescale/mx31ads/u-boot.lds        |   2 +-
 common/Kconfig                            | 429 ------------------------------
 common/Makefile                           |  49 +---
 env/Kconfig                               | 428 +++++++++++++++++++++++++++++
 env/Makefile                              |  57 ++++
 common/env_attr.c => env/attr.c           |   0
 common/env_callback.c => env/callback.c   |   0
 common/env_common.c => env/common.c       |   0
 common/env_dataflash.c => env/dataflash.c |   0
 common/env_eeprom.c => env/eeprom.c       |   0
 common/env_embedded.c => env/embedded.c   |   0
 common/env_ext4.c => env/ext4.c           |   0
 common/env_fat.c => env/fat.c             |   0
 common/env_flags.c => env/flags.c         |   0
 common/env_flash.c => env/flash.c         |   0
 common/env_mmc.c => env/mmc.c             |   0
 common/env_nand.c => env/nand.c           |   0
 common/env_nowhere.c => env/nowhere.c     |   0
 common/env_nvram.c => env/nvram.c         |   0
 common/env_onenand.c => env/onenand.c     |   0
 common/env_remote.c => env/remote.c       |   0
 common/env_sata.c => env/sata.c           |   0
 common/env_sf.c => env/sf.c               |   0
 common/env_ubi.c => env/ubi.c             |   0
 include/configs/M5208EVBE.h               |   4 +-
 include/configs/M5235EVB.h                |   2 +-
 include/configs/M5249EVB.h                |   4 +-
 include/configs/M5253DEMO.h               |   4 +-
 include/configs/M5253EVBE.h               |   2 +-
 include/configs/M5272C3.h                 |   4 +-
 include/configs/M5275EVB.h                |   4 +-
 include/configs/M5282EVB.h                |   2 +-
 include/configs/M53017EVB.h               |   2 +-
 include/configs/M5329EVB.h                |   4 +-
 include/configs/M5373EVB.h                |   4 +-
 include/configs/amcore.h                  |   4 +-
 include/configs/astro_mcf5373l.h          |   2 +-
 include/configs/cobra5272.h               |   4 +-
 scripts/Makefile.spl                      |   4 +-
 tools/Makefile                            |   4 +-
 43 files changed, 519 insertions(+), 507 deletions(-)
 create mode 100644 env/Kconfig
 create mode 100644 env/Makefile
 rename common/env_attr.c => env/attr.c (100%)
 rename common/env_callback.c => env/callback.c (100%)
 rename common/env_common.c => env/common.c (100%)
 rename common/env_dataflash.c => env/dataflash.c (100%)
 rename common/env_eeprom.c => env/eeprom.c (100%)
 rename common/env_embedded.c => env/embedded.c (100%)
 rename common/env_ext4.c => env/ext4.c (100%)
 rename common/env_fat.c => env/fat.c (100%)
 rename common/env_flags.c => env/flags.c (100%)
 rename common/env_flash.c => env/flash.c (100%)
 rename common/env_mmc.c => env/mmc.c (100%)
 rename common/env_nand.c => env/nand.c (100%)
 rename common/env_nowhere.c => env/nowhere.c (100%)
 rename common/env_nvram.c => env/nvram.c (100%)
 rename common/env_onenand.c => env/onenand.c (100%)
 rename common/env_remote.c => env/remote.c (100%)
 rename common/env_sata.c => env/sata.c (100%)
 rename common/env_sf.c => env/sf.c (100%)
 rename common/env_ubi.c => env/ubi.c (100%)

diff --git a/Kconfig b/Kconfig
index c1451bceda..5ca3854b23 100644
--- a/Kconfig
+++ b/Kconfig
@@ -368,6 +368,8 @@ source "disk/Kconfig"
 
 source "dts/Kconfig"
 
+source "env/Kconfig"
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff --git a/Makefile b/Makefile
index 5b16965585..e95b658570 100644
--- a/Makefile
+++ b/Makefile
@@ -690,6 +690,7 @@ libs-y += drivers/usb/phy/
 libs-y += drivers/usb/ulpi/
 libs-y += cmd/
 libs-y += common/
+libs-y += env/
 libs-$(CONFIG_API) += api/
 libs-$(CONFIG_HAS_POST) += post/
 libs-y += test/
diff --git a/arch/sh/cpu/u-boot.lds b/arch/sh/cpu/u-boot.lds
index bbf9ff485f..7fc91bc4aa 100644
--- a/arch/sh/cpu/u-boot.lds
+++ b/arch/sh/cpu/u-boot.lds
@@ -33,9 +33,9 @@ SECTIONS
 		KEEP(CONFIG_BOARDDIR/lowlevel_init.o	(.text .spiboot1.text))
 		KEEP(*(.spiboot2.text))
 		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenv)
+		env/embedded.o	(.ppcenv)
 		. = ALIGN(8192);
-		common/env_embedded.o	(.ppcenvr)
+		env/embedded.o	(.ppcenvr)
 		. = ALIGN(8192);
 		*(.text)
 		. = ALIGN(4);
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 8a4a8a2f07..71a63f188e 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -30,7 +30,7 @@ SECTIONS
 	  drivers/mtd/built-in.o		(.text*)
 
 	  . = DEFINED(env_offset) ? env_offset : .;
-	  common/env_embedded.o(.text*)
+	  env/embedded.o(.text*)
 
 	  *(.text*)
 	}
diff --git a/common/Kconfig b/common/Kconfig
index 8c8d2e4832..5f439bd110 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -174,435 +174,6 @@ config SPI_BOOT
 
 endmenu
 
-menu "Environment"
-
-config ENV_IS_IN_DATAFLASH
-	bool "Environment in dataflash"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you have a DataFlash memory device which you
-	  want to use for the environment.
-
-	  - CONFIG_ENV_OFFSET:
-	  - CONFIG_ENV_ADDR:
-	  - CONFIG_ENV_SIZE:
-
-	  These three #defines specify the offset and size of the
-	  environment area within the total memory of your DataFlash placed
-	  at the specified address.
-
-config ENV_IS_IN_EEPROM
-	bool "Environment in EEPROM"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Use this if you have an EEPROM or similar serial access
-	  device and a driver for it.
-
-	  - CONFIG_ENV_OFFSET:
-	  - CONFIG_ENV_SIZE:
-
-	  These two #defines specify the offset and size of the
-	  environment area within the total memory of your EEPROM.
-
-	  - CONFIG_SYS_I2C_EEPROM_ADDR:
-	  If defined, specified the chip address of the EEPROM device.
-	  The default address is zero.
-
-	  - CONFIG_SYS_I2C_EEPROM_BUS:
-	  If defined, specified the i2c bus of the EEPROM device.
-
-	  - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
-	  If defined, the number of bits used to address bytes in a
-	  single page in the EEPROM device.  A 64 byte page, for example
-	  would require six bits.
-
-	  - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
-	  If defined, the number of milliseconds to delay between
-	  page writes.	The default is zero milliseconds.
-
-	  - CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
-	  The length in bytes of the EEPROM memory array address.  Note
-	  that this is NOT the chip address length!
-
-	  - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
-	  EEPROM chips that implement "address overflow" are ones
-	  like Catalyst 24WC04/08/16 which has 9/10/11 bits of
-	  address and the extra bits end up in the "chip address" bit
-	  slots. This makes a 24WC08 (1Kbyte) chip look like four 256
-	  byte chips.
-
-	  Note that we consider the length of the address field to
-	  still be one byte because the extra address bits are hidden
-	  in the chip address.
-
-	  - CONFIG_SYS_EEPROM_SIZE:
-	  The size in bytes of the EEPROM device.
-
-	  - CONFIG_ENV_EEPROM_IS_ON_I2C
-	  define this, if you have I2C and SPI activated, and your
-	  EEPROM, which holds the environment, is on the I2C bus.
-
-	  - CONFIG_I2C_ENV_EEPROM_BUS
-	  if you have an Environment on an EEPROM reached over
-	  I2C muxes, you can define here, how to reach this
-	  EEPROM. For example:
-
-	  #define CONFIG_I2C_ENV_EEPROM_BUS	  1
-
-	  EEPROM which holds the environment, is reached over
-	  a pca9547 i2c mux with address 0x70, channel 3.
-
-config ENV_IS_IN_FAT
-	bool "Environment is in a FAT filesystem"
-	depends on !CHAIN_OF_TRUST
-	help
-         Define this if you want to use the FAT file system for the environment.
-
-         - FAT_ENV_INTERFACE:
-
-         Define this to a string that is the name of the block device.
-
-         - FAT_ENV_DEVICE_AND_PART:
-
-         Define this to a string to specify the partition of the device. It can
-         be as following:
-
-           "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
-               - "D:P": device D partition P. Error occurs if device D has no
-                        partition table.
-               - "D:0": device D.
-               - "D" or "D:": device D partition 1 if device D has partition
-                              table, or the whole device D if has no partition
-                              table.
-               - "D:auto": first partition in device D with bootable flag set.
-                           If none, first valid partition in device D. If no
-                           partition table then means device D.
-
-         - FAT_ENV_FILE:
-
-         It's a string of the FAT file name. This file use to store the
-         environment.
-
-         - CONFIG_FAT_WRITE:
-         This must be enabled. Otherwise it cannot save the environment file.
-
-config ENV_IS_IN_FLASH
-	bool "Environment in flash memory"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you have a flash device which you want to use for the
-	  environment.
-
-	  a) The environment occupies one whole flash sector, which is
-	   "embedded" in the text segment with the U-Boot code. This
-	   happens usually with "bottom boot sector" or "top boot
-	   sector" type flash chips, which have several smaller
-	   sectors at the start or the end. For instance, such a
-	   layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
-	   such a case you would place the environment in one of the
-	   4 kB sectors - with U-Boot code before and after it. With
-	   "top boot sector" type flash chips, you would put the
-	   environment in one of the last sectors, leaving a gap
-	   between U-Boot and the environment.
-
-	  CONFIG_ENV_OFFSET:
-
-	   Offset of environment data (variable area) to the
-	   beginning of flash memory; for instance, with bottom boot
-	   type flash chips the second sector can be used: the offset
-	   for this sector is given here.
-
-	   CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
-
-	  CONFIG_ENV_ADDR:
-
-	   This is just another way to specify the start address of
-	   the flash sector containing the environment (instead of
-	   CONFIG_ENV_OFFSET).
-
-	  CONFIG_ENV_SECT_SIZE:
-
-	   Size of the sector containing the environment.
-
-
-	  b) Sometimes flash chips have few, equal sized, BIG sectors.
-	   In such a case you don't want to spend a whole sector for
-	   the environment.
-
-	  CONFIG_ENV_SIZE:
-
-	   If you use this in combination with CONFIG_ENV_IS_IN_FLASH
-	   and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
-	   of this flash sector for the environment. This saves
-	   memory for the RAM copy of the environment.
-
-	   It may also save flash memory if you decide to use this
-	   when your environment is "embedded" within U-Boot code,
-	   since then the remainder of the flash sector could be used
-	   for U-Boot code. It should be pointed out that this is
-	   STRONGLY DISCOURAGED from a robustness point of view:
-	   updating the environment in flash makes it always
-	   necessary to erase the WHOLE sector. If something goes
-	   wrong before the contents has been restored from a copy in
-	   RAM, your target system will be dead.
-
-	  CONFIG_ENV_ADDR_REDUND
-	  CONFIG_ENV_SIZE_REDUND
-
-	   These settings describe a second storage area used to hold
-	   a redundant copy of the environment data, so that there is
-	   a valid backup copy in case there is a power failure during
-	   a "saveenv" operation.
-
-	  BE CAREFUL! Any changes to the flash layout, and some changes to the
-	  source code will make it necessary to adapt <board>/u-boot.lds*
-	  accordingly!
-
-config ENV_IS_IN_MMC
-	bool "Environment in an MMC device"
-	depends on !CHAIN_OF_TRUST
-	default y if ARCH_SUNXI
-	help
-	  Define this if you have an MMC device which you want to use for the
-	  environment.
-
-	  CONFIG_SYS_MMC_ENV_DEV:
-
-	  Specifies which MMC device the environment is stored in.
-
-	  CONFIG_SYS_MMC_ENV_PART (optional):
-
-	  Specifies which MMC partition the environment is stored in. If not
-	  set, defaults to partition 0, the user area. Common values might be
-	  1 (first MMC boot partition), 2 (second MMC boot partition).
-
-	  CONFIG_ENV_OFFSET:
-	  CONFIG_ENV_SIZE:
-
-	  These two #defines specify the offset and size of the environment
-	  area within the specified MMC device.
-
-	  If offset is positive (the usual case), it is treated as relative to
-	  the start of the MMC partition. If offset is negative, it is treated
-	  as relative to the end of the MMC partition. This can be useful if
-	  your board may be fitted with different MMC devices, which have
-	  different sizes for the MMC partitions, and you always want the
-	  environment placed at the very end of the partition, to leave the
-	  maximum possible space before it, to store other data.
-
-	  These two values are in units of bytes, but must be aligned to an
-	  MMC sector boundary.
-
-	  CONFIG_ENV_OFFSET_REDUND (optional):
-
-	  Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
-	  hold a redundant copy of the environment data. This provides a
-	  valid backup copy in case the other copy is corrupted, e.g. due
-	  to a power failure during a "saveenv" operation.
-
-	  This value may also be positive or negative; this is handled in the
-	  same way as CONFIG_ENV_OFFSET.
-
-	  This value is also in units of bytes, but must also be aligned to
-	  an MMC sector boundary.
-
-	  CONFIG_ENV_SIZE_REDUND (optional):
-
-	  This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
-	  set. If this value is set, it must be set to the same value as
-	  CONFIG_ENV_SIZE.
-
-config ENV_IS_IN_NAND
-	bool "Environment in a NAND device"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you have a NAND device which you want to use for the
-	  environment.
-
-	  - CONFIG_ENV_OFFSET:
-	  - CONFIG_ENV_SIZE:
-
-	  These two #defines specify the offset and size of the environment
-	  area within the first NAND device.  CONFIG_ENV_OFFSET must be
-	  aligned to an erase block boundary.
-
-	  - CONFIG_ENV_OFFSET_REDUND (optional):
-
-	  This setting describes a second storage area of CONFIG_ENV_SIZE
-	  size used to hold a redundant copy of the environment data, so
-	  that there is a valid backup copy in case there is a power failure
-	  during a "saveenv" operation.	 CONFIG_ENV_OFFSET_REDUND must be
-	  aligned to an erase block boundary.
-
-	  - CONFIG_ENV_RANGE (optional):
-
-	  Specifies the length of the region in which the environment
-	  can be written.  This should be a multiple of the NAND device's
-	  block size.  Specifying a range with more erase blocks than
-	  are needed to hold CONFIG_ENV_SIZE allows bad blocks within
-	  the range to be avoided.
-
-	  - CONFIG_ENV_OFFSET_OOB (optional):
-
-	  Enables support for dynamically retrieving the offset of the
-	  environment from block zero's out-of-band data.  The
-	  "nand env.oob" command can be used to record this offset.
-	  Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
-	  using CONFIG_ENV_OFFSET_OOB.
-
-config ENV_IS_IN_NVRAM
-	bool "Environment in a non-volatile RAM"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you have some non-volatile memory device
-	  (NVRAM, battery buffered SRAM) which you want to use for the
-	  environment.
-
-	  - CONFIG_ENV_ADDR:
-	  - CONFIG_ENV_SIZE:
-
-	  These two #defines are used to determine the memory area you
-	  want to use for environment. It is assumed that this memory
-	  can just be read and written to, without any special
-	  provision.
-
-config ENV_IS_IN_ONENAND
-	bool "Environment is in OneNAND"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you want to put your local device's environment in
-	  OneNAND.
-
-	  - CONFIG_ENV_ADDR:
-	  - CONFIG_ENV_SIZE:
-
-	  These two #defines are used to determine the device range you
-	  want to use for environment. It is assumed that this memory
-	  can just be read and written to, without any special
-	  provision.
-
-config ENV_IS_IN_REMOTE
-	bool "Environment is in remove memory space"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you have a remote memory space which you
-	  want to use for the local device's environment.
-
-	  - CONFIG_ENV_ADDR:
-	  - CONFIG_ENV_SIZE:
-
-	  These two #defines specify the address and size of the
-	  environment area within the remote memory space. The
-	  local device can get the environment from remote memory
-	  space by SRIO or PCIE links.
-
-config ENV_IS_IN_SPI_FLASH
-	bool "Environment is in SPI flash"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you have a SPI Flash memory device which you
-	  want to use for the environment.
-
-	  - CONFIG_ENV_OFFSET:
-	  - CONFIG_ENV_SIZE:
-
-	  These two #defines specify the offset and size of the
-	  environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
-	  aligned to an erase sector boundary.
-
-	  - CONFIG_ENV_SECT_SIZE:
-
-	  Define the SPI flash's sector size.
-
-	  - CONFIG_ENV_OFFSET_REDUND (optional):
-
-	  This setting describes a second storage area of CONFIG_ENV_SIZE
-	  size used to hold a redundant copy of the environment data, so
-	  that there is a valid backup copy in case there is a power failure
-	  during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
-	  aligned to an erase sector boundary.
-
-	  - CONFIG_ENV_SPI_BUS (optional):
-	  - CONFIG_ENV_SPI_CS (optional):
-
-	  Define the SPI bus and chip select. If not defined they will be 0.
-
-	  - CONFIG_ENV_SPI_MAX_HZ (optional):
-
-	  Define the SPI max work clock. If not defined then use 1MHz.
-
-	  - CONFIG_ENV_SPI_MODE (optional):
-
-	  Define the SPI work mode. If not defined then use SPI_MODE_3.
-
-config ENV_IS_IN_UBI
-	bool "Environment in a UBI volume"
-	depends on !CHAIN_OF_TRUST
-	help
-	  Define this if you have an UBI volume that you want to use for the
-	  environment.  This has the benefit of wear-leveling the environment
-	  accesses, which is important on NAND.
-
-	  - CONFIG_ENV_UBI_PART:
-
-	  Define this to a string that is the mtd partition containing the UBI.
-
-	  - CONFIG_ENV_UBI_VOLUME:
-
-	  Define this to the name of the volume that you want to store the
-	  environment in.
-
-	  - CONFIG_ENV_UBI_VOLUME_REDUND:
-
-	  Define this to the name of another volume to store a second copy of
-	  the environment in.  This will enable redundant environments in UBI.
-	  It is assumed that both volumes are in the same MTD partition.
-
-	  - CONFIG_UBI_SILENCE_MSG
-	  - CONFIG_UBIFS_SILENCE_MSG
-
-	  You will probably want to define these to avoid a really noisy system
-	  when storing the env in UBI.
-
-config ENV_IS_NOWHERE
-	bool "Environment is not stored"
-	help
-	  Define this if you don't want to or can't have an environment stored
-	  on a storage medium
-
-if ARCH_SUNXI
-
-config ENV_OFFSET
-	hex "Environment Offset"
-	depends on !ENV_IS_IN_UBI
-	depends on !ENV_IS_NOWHERE
-	default 0x88000 if ARCH_SUNXI
-	help
-	  Offset from the start of the device (or partition)
-
-config ENV_SIZE
-	hex "Environment Size"
-	depends on !ENV_IS_NOWHERE
-	default 0x20000 if ARCH_SUNXI
-	help
-	  Size of the environment storage area
-
-config ENV_UBI_PART
-	string "UBI partition name"
-	depends on ENV_IS_IN_UBI
-	help
-	  MTD partition containing the UBI device
-
-config ENV_UBI_VOLUME
-	string "UBI volume name"
-	depends on ENV_IS_IN_UBI
-	help
-	  Name of the volume that you want to store the environment in.
-
-endif
-
-endmenu
-
 config BOOTDELAY
 	int "delay in seconds before automatically booting"
 	default 2
diff --git a/common/Makefile b/common/Makefile
index 60681c845c..4d41b02434 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -19,7 +19,7 @@ ifdef CONFIG_BOOT_RETRY_TIME
 obj-y += bootretry.o
 endif
 
-# boards
+# # boards
 obj-y += board_f.o
 obj-y += board_r.o
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
@@ -29,29 +29,6 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o
 obj-$(CONFIG_CMD_BOOTZ) += bootm.o bootm_os.o
 obj-$(CONFIG_CMD_BOOTI) += bootm.o bootm_os.o
 
-# environment
-obj-y += env_attr.o
-obj-y += env_callback.o
-obj-y += env_flags.o
-obj-$(CONFIG_ENV_IS_IN_DATAFLASH) += env_dataflash.o
-obj-$(CONFIG_ENV_IS_IN_EEPROM) += env_eeprom.o
-extra-$(CONFIG_ENV_IS_EMBEDDED) += env_embedded.o
-obj-$(CONFIG_ENV_IS_IN_EEPROM) += env_embedded.o
-extra-$(CONFIG_ENV_IS_IN_FLASH) += env_embedded.o
-obj-$(CONFIG_ENV_IS_IN_NVRAM) += env_embedded.o
-obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
-obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
-obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o
-obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o
-obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
-obj-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o
-obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o
-obj-$(CONFIG_ENV_IS_IN_SATA) += env_sata.o
-obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
-obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
-obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
-obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
-
 obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
 obj-$(CONFIG_$(SPL_)OF_LIBFDT) += fdt_support.o
 
@@ -92,7 +69,6 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu.o
 obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
 obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
-obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
 obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
@@ -101,28 +77,7 @@ ifdef CONFIG_SPL_USB_HOST_SUPPORT
 obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
 obj-$(CONFIG_USB_STORAGE) += usb_storage.o
 endif
-# environment
-ifdef CONFIG_TPL_BUILD
-obj-$(CONFIG_TPL_ENV_SUPPORT) += env_attr.o
-obj-$(CONFIG_TPL_ENV_SUPPORT) += env_flags.o
-obj-$(CONFIG_TPL_ENV_SUPPORT) += env_callback.o
-else
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
-endif
-ifneq ($(CONFIG_TPL_ENV_SUPPORT)$(CONFIG_SPL_ENV_SUPPORT),)
-obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
-obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
-obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o
-obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o
-obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
-obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
-obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
-endif
 endif
-#environment
-obj-y += env_common.o
 #others
 obj-$(CONFIG_DDR_SPD) += ddr_spd.o
 obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o
@@ -175,5 +130,3 @@ obj-$(CONFIG_CMD_DFU) += dfu.o
 obj-y += command.o
 obj-y += s_record.o
 obj-y += xyzModem.o
-
-CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/env/Kconfig b/env/Kconfig
new file mode 100644
index 0000000000..6e885f85a6
--- /dev/null
+++ b/env/Kconfig
@@ -0,0 +1,428 @@
+menu "Environment"
+
+config ENV_IS_IN_DATAFLASH
+	bool "Environment in dataflash"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you have a DataFlash memory device which you
+	  want to use for the environment.
+
+	  - CONFIG_ENV_OFFSET:
+	  - CONFIG_ENV_ADDR:
+	  - CONFIG_ENV_SIZE:
+
+	  These three #defines specify the offset and size of the
+	  environment area within the total memory of your DataFlash placed
+	  at the specified address.
+
+config ENV_IS_IN_EEPROM
+	bool "Environment in EEPROM"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Use this if you have an EEPROM or similar serial access
+	  device and a driver for it.
+
+	  - CONFIG_ENV_OFFSET:
+	  - CONFIG_ENV_SIZE:
+
+	  These two #defines specify the offset and size of the
+	  environment area within the total memory of your EEPROM.
+
+	  - CONFIG_SYS_I2C_EEPROM_ADDR:
+	  If defined, specified the chip address of the EEPROM device.
+	  The default address is zero.
+
+	  - CONFIG_SYS_I2C_EEPROM_BUS:
+	  If defined, specified the i2c bus of the EEPROM device.
+
+	  - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
+	  If defined, the number of bits used to address bytes in a
+	  single page in the EEPROM device.  A 64 byte page, for example
+	  would require six bits.
+
+	  - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
+	  If defined, the number of milliseconds to delay between
+	  page writes.	The default is zero milliseconds.
+
+	  - CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
+	  The length in bytes of the EEPROM memory array address.  Note
+	  that this is NOT the chip address length!
+
+	  - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
+	  EEPROM chips that implement "address overflow" are ones
+	  like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	  address and the extra bits end up in the "chip address" bit
+	  slots. This makes a 24WC08 (1Kbyte) chip look like four 256
+	  byte chips.
+
+	  Note that we consider the length of the address field to
+	  still be one byte because the extra address bits are hidden
+	  in the chip address.
+
+	  - CONFIG_SYS_EEPROM_SIZE:
+	  The size in bytes of the EEPROM device.
+
+	  - CONFIG_ENV_EEPROM_IS_ON_I2C
+	  define this, if you have I2C and SPI activated, and your
+	  EEPROM, which holds the environment, is on the I2C bus.
+
+	  - CONFIG_I2C_ENV_EEPROM_BUS
+	  if you have an Environment on an EEPROM reached over
+	  I2C muxes, you can define here, how to reach this
+	  EEPROM. For example:
+
+	  #define CONFIG_I2C_ENV_EEPROM_BUS	  1
+
+	  EEPROM which holds the environment, is reached over
+	  a pca9547 i2c mux with address 0x70, channel 3.
+
+config ENV_IS_IN_FAT
+	bool "Environment is in a FAT filesystem"
+	depends on !CHAIN_OF_TRUST
+	help
+         Define this if you want to use the FAT file system for the environment.
+
+         - FAT_ENV_INTERFACE:
+
+         Define this to a string that is the name of the block device.
+
+         - FAT_ENV_DEVICE_AND_PART:
+
+         Define this to a string to specify the partition of the device. It can
+         be as following:
+
+           "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
+               - "D:P": device D partition P. Error occurs if device D has no
+                        partition table.
+               - "D:0": device D.
+               - "D" or "D:": device D partition 1 if device D has partition
+                              table, or the whole device D if has no partition
+                              table.
+               - "D:auto": first partition in device D with bootable flag set.
+                           If none, first valid partition in device D. If no
+                           partition table then means device D.
+
+         - FAT_ENV_FILE:
+
+         It's a string of the FAT file name. This file use to store the
+         environment.
+
+         - CONFIG_FAT_WRITE:
+         This must be enabled. Otherwise it cannot save the environment file.
+
+config ENV_IS_IN_FLASH
+	bool "Environment in flash memory"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you have a flash device which you want to use for the
+	  environment.
+
+	  a) The environment occupies one whole flash sector, which is
+	   "embedded" in the text segment with the U-Boot code. This
+	   happens usually with "bottom boot sector" or "top boot
+	   sector" type flash chips, which have several smaller
+	   sectors at the start or the end. For instance, such a
+	   layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
+	   such a case you would place the environment in one of the
+	   4 kB sectors - with U-Boot code before and after it. With
+	   "top boot sector" type flash chips, you would put the
+	   environment in one of the last sectors, leaving a gap
+	   between U-Boot and the environment.
+
+	  CONFIG_ENV_OFFSET:
+
+	   Offset of environment data (variable area) to the
+	   beginning of flash memory; for instance, with bottom boot
+	   type flash chips the second sector can be used: the offset
+	   for this sector is given here.
+
+	   CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
+
+	  CONFIG_ENV_ADDR:
+
+	   This is just another way to specify the start address of
+	   the flash sector containing the environment (instead of
+	   CONFIG_ENV_OFFSET).
+
+	  CONFIG_ENV_SECT_SIZE:
+
+	   Size of the sector containing the environment.
+
+
+	  b) Sometimes flash chips have few, equal sized, BIG sectors.
+	   In such a case you don't want to spend a whole sector for
+	   the environment.
+
+	  CONFIG_ENV_SIZE:
+
+	   If you use this in combination with CONFIG_ENV_IS_IN_FLASH
+	   and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
+	   of this flash sector for the environment. This saves
+	   memory for the RAM copy of the environment.
+
+	   It may also save flash memory if you decide to use this
+	   when your environment is "embedded" within U-Boot code,
+	   since then the remainder of the flash sector could be used
+	   for U-Boot code. It should be pointed out that this is
+	   STRONGLY DISCOURAGED from a robustness point of view:
+	   updating the environment in flash makes it always
+	   necessary to erase the WHOLE sector. If something goes
+	   wrong before the contents has been restored from a copy in
+	   RAM, your target system will be dead.
+
+	  CONFIG_ENV_ADDR_REDUND
+	  CONFIG_ENV_SIZE_REDUND
+
+	   These settings describe a second storage area used to hold
+	   a redundant copy of the environment data, so that there is
+	   a valid backup copy in case there is a power failure during
+	   a "saveenv" operation.
+
+	  BE CAREFUL! Any changes to the flash layout, and some changes to the
+	  source code will make it necessary to adapt <board>/u-boot.lds*
+	  accordingly!
+
+config ENV_IS_IN_MMC
+	bool "Environment in an MMC device"
+	depends on !CHAIN_OF_TRUST
+	default y if ARCH_SUNXI
+	help
+	  Define this if you have an MMC device which you want to use for the
+	  environment.
+
+	  CONFIG_SYS_MMC_ENV_DEV:
+
+	  Specifies which MMC device the environment is stored in.
+
+	  CONFIG_SYS_MMC_ENV_PART (optional):
+
+	  Specifies which MMC partition the environment is stored in. If not
+	  set, defaults to partition 0, the user area. Common values might be
+	  1 (first MMC boot partition), 2 (second MMC boot partition).
+
+	  CONFIG_ENV_OFFSET:
+	  CONFIG_ENV_SIZE:
+
+	  These two #defines specify the offset and size of the environment
+	  area within the specified MMC device.
+
+	  If offset is positive (the usual case), it is treated as relative to
+	  the start of the MMC partition. If offset is negative, it is treated
+	  as relative to the end of the MMC partition. This can be useful if
+	  your board may be fitted with different MMC devices, which have
+	  different sizes for the MMC partitions, and you always want the
+	  environment placed at the very end of the partition, to leave the
+	  maximum possible space before it, to store other data.
+
+	  These two values are in units of bytes, but must be aligned to an
+	  MMC sector boundary.
+
+	  CONFIG_ENV_OFFSET_REDUND (optional):
+
+	  Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
+	  hold a redundant copy of the environment data. This provides a
+	  valid backup copy in case the other copy is corrupted, e.g. due
+	  to a power failure during a "saveenv" operation.
+
+	  This value may also be positive or negative; this is handled in the
+	  same way as CONFIG_ENV_OFFSET.
+
+	  This value is also in units of bytes, but must also be aligned to
+	  an MMC sector boundary.
+
+	  CONFIG_ENV_SIZE_REDUND (optional):
+
+	  This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
+	  set. If this value is set, it must be set to the same value as
+	  CONFIG_ENV_SIZE.
+
+config ENV_IS_IN_NAND
+	bool "Environment in a NAND device"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you have a NAND device which you want to use for the
+	  environment.
+
+	  - CONFIG_ENV_OFFSET:
+	  - CONFIG_ENV_SIZE:
+
+	  These two #defines specify the offset and size of the environment
+	  area within the first NAND device.  CONFIG_ENV_OFFSET must be
+	  aligned to an erase block boundary.
+
+	  - CONFIG_ENV_OFFSET_REDUND (optional):
+
+	  This setting describes a second storage area of CONFIG_ENV_SIZE
+	  size used to hold a redundant copy of the environment data, so
+	  that there is a valid backup copy in case there is a power failure
+	  during a "saveenv" operation.	 CONFIG_ENV_OFFSET_REDUND must be
+	  aligned to an erase block boundary.
+
+	  - CONFIG_ENV_RANGE (optional):
+
+	  Specifies the length of the region in which the environment
+	  can be written.  This should be a multiple of the NAND device's
+	  block size.  Specifying a range with more erase blocks than
+	  are needed to hold CONFIG_ENV_SIZE allows bad blocks within
+	  the range to be avoided.
+
+	  - CONFIG_ENV_OFFSET_OOB (optional):
+
+	  Enables support for dynamically retrieving the offset of the
+	  environment from block zero's out-of-band data.  The
+	  "nand env.oob" command can be used to record this offset.
+	  Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
+	  using CONFIG_ENV_OFFSET_OOB.
+
+config ENV_IS_IN_NVRAM
+	bool "Environment in a non-volatile RAM"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you have some non-volatile memory device
+	  (NVRAM, battery buffered SRAM) which you want to use for the
+	  environment.
+
+	  - CONFIG_ENV_ADDR:
+	  - CONFIG_ENV_SIZE:
+
+	  These two #defines are used to determine the memory area you
+	  want to use for environment. It is assumed that this memory
+	  can just be read and written to, without any special
+	  provision.
+
+config ENV_IS_IN_ONENAND
+	bool "Environment is in OneNAND"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you want to put your local device's environment in
+	  OneNAND.
+
+	  - CONFIG_ENV_ADDR:
+	  - CONFIG_ENV_SIZE:
+
+	  These two #defines are used to determine the device range you
+	  want to use for environment. It is assumed that this memory
+	  can just be read and written to, without any special
+	  provision.
+
+config ENV_IS_IN_REMOTE
+	bool "Environment is in remove memory space"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you have a remote memory space which you
+	  want to use for the local device's environment.
+
+	  - CONFIG_ENV_ADDR:
+	  - CONFIG_ENV_SIZE:
+
+	  These two #defines specify the address and size of the
+	  environment area within the remote memory space. The
+	  local device can get the environment from remote memory
+	  space by SRIO or PCIE links.
+
+config ENV_IS_IN_SPI_FLASH
+	bool "Environment is in SPI flash"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you have a SPI Flash memory device which you
+	  want to use for the environment.
+
+	  - CONFIG_ENV_OFFSET:
+	  - CONFIG_ENV_SIZE:
+
+	  These two #defines specify the offset and size of the
+	  environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
+	  aligned to an erase sector boundary.
+
+	  - CONFIG_ENV_SECT_SIZE:
+
+	  Define the SPI flash's sector size.
+
+	  - CONFIG_ENV_OFFSET_REDUND (optional):
+
+	  This setting describes a second storage area of CONFIG_ENV_SIZE
+	  size used to hold a redundant copy of the environment data, so
+	  that there is a valid backup copy in case there is a power failure
+	  during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
+	  aligned to an erase sector boundary.
+
+	  - CONFIG_ENV_SPI_BUS (optional):
+	  - CONFIG_ENV_SPI_CS (optional):
+
+	  Define the SPI bus and chip select. If not defined they will be 0.
+
+	  - CONFIG_ENV_SPI_MAX_HZ (optional):
+
+	  Define the SPI max work clock. If not defined then use 1MHz.
+
+	  - CONFIG_ENV_SPI_MODE (optional):
+
+	  Define the SPI work mode. If not defined then use SPI_MODE_3.
+
+config ENV_IS_IN_UBI
+	bool "Environment in a UBI volume"
+	depends on !CHAIN_OF_TRUST
+	help
+	  Define this if you have an UBI volume that you want to use for the
+	  environment.  This has the benefit of wear-leveling the environment
+	  accesses, which is important on NAND.
+
+	  - CONFIG_ENV_UBI_PART:
+
+	  Define this to a string that is the mtd partition containing the UBI.
+
+	  - CONFIG_ENV_UBI_VOLUME:
+
+	  Define this to the name of the volume that you want to store the
+	  environment in.
+
+	  - CONFIG_ENV_UBI_VOLUME_REDUND:
+
+	  Define this to the name of another volume to store a second copy of
+	  the environment in.  This will enable redundant environments in UBI.
+	  It is assumed that both volumes are in the same MTD partition.
+
+	  - CONFIG_UBI_SILENCE_MSG
+	  - CONFIG_UBIFS_SILENCE_MSG
+
+	  You will probably want to define these to avoid a really noisy system
+	  when storing the env in UBI.
+
+config ENV_IS_NOWHERE
+	bool "Environment is not stored"
+	help
+	  Define this if you don't want to or can't have an environment stored
+	  on a storage medium
+
+if ARCH_SUNXI
+
+config ENV_OFFSET
+	hex "Environment Offset"
+	depends on !ENV_IS_IN_UBI
+	depends on !ENV_IS_NOWHERE
+	default 0x88000 if ARCH_SUNXI
+	help
+	  Offset from the start of the device (or partition)
+
+config ENV_SIZE
+	hex "Environment Size"
+	depends on !ENV_IS_NOWHERE
+	default 0x20000 if ARCH_SUNXI
+	help
+	  Size of the environment storage area
+
+config ENV_UBI_PART
+	string "UBI partition name"
+	depends on ENV_IS_IN_UBI
+	help
+	  MTD partition containing the UBI device
+
+config ENV_UBI_VOLUME
+	string "UBI volume name"
+	depends on ENV_IS_IN_UBI
+	help
+	  Name of the volume that you want to store the environment in.
+
+endif
+
+endmenu
diff --git a/env/Makefile b/env/Makefile
new file mode 100644
index 0000000000..4c1bdcfdf4
--- /dev/null
+++ b/env/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2004-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += common.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += attr.o
+obj-y += callback.o
+obj-y += flags.o
+obj-$(CONFIG_ENV_IS_IN_DATAFLASH) += dataflash.o
+obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o
+extra-$(CONFIG_ENV_IS_EMBEDDED) += embedded.o
+obj-$(CONFIG_ENV_IS_IN_EEPROM) += embedded.o
+extra-$(CONFIG_ENV_IS_IN_FLASH) += embedded.o
+obj-$(CONFIG_ENV_IS_IN_NVRAM) += embedded.o
+obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o
+obj-$(CONFIG_ENV_IS_IN_MMC) += mmc.o
+obj-$(CONFIG_ENV_IS_IN_FAT) += fat.o
+obj-$(CONFIG_ENV_IS_IN_EXT4) += ext4.o
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand.o
+obj-$(CONFIG_ENV_IS_IN_NVRAM) += nvram.o
+obj-$(CONFIG_ENV_IS_IN_ONENAND) += onenand.o
+obj-$(CONFIG_ENV_IS_IN_SATA) += sata.o
+obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += sf.o
+obj-$(CONFIG_ENV_IS_IN_REMOTE) += remote.o
+obj-$(CONFIG_ENV_IS_IN_UBI) += ubi.o
+obj-$(CONFIG_ENV_IS_NOWHERE) += nowhere.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o
+# environment
+ifdef CONFIG_TPL_BUILD
+obj-$(CONFIG_TPL_ENV_SUPPORT) += attr.o
+obj-$(CONFIG_TPL_ENV_SUPPORT) += flags.o
+obj-$(CONFIG_TPL_ENV_SUPPORT) += callback.o
+else
+obj-$(CONFIG_SPL_ENV_SUPPORT) += attr.o
+obj-$(CONFIG_SPL_ENV_SUPPORT) += flags.o
+obj-$(CONFIG_SPL_ENV_SUPPORT) += callback.o
+endif
+ifneq ($(CONFIG_TPL_ENV_SUPPORT)$(CONFIG_SPL_ENV_SUPPORT),)
+obj-$(CONFIG_ENV_IS_NOWHERE) += nowhere.o
+obj-$(CONFIG_ENV_IS_IN_MMC) += mmc.o
+obj-$(CONFIG_ENV_IS_IN_FAT) += fat.o
+obj-$(CONFIG_ENV_IS_IN_EXT4) += ext4.o
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand.o
+obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += sf.o
+obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o
+endif
+endif
+
+CFLAGS_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/common/env_attr.c b/env/attr.c
similarity index 100%
rename from common/env_attr.c
rename to env/attr.c
diff --git a/common/env_callback.c b/env/callback.c
similarity index 100%
rename from common/env_callback.c
rename to env/callback.c
diff --git a/common/env_common.c b/env/common.c
similarity index 100%
rename from common/env_common.c
rename to env/common.c
diff --git a/common/env_dataflash.c b/env/dataflash.c
similarity index 100%
rename from common/env_dataflash.c
rename to env/dataflash.c
diff --git a/common/env_eeprom.c b/env/eeprom.c
similarity index 100%
rename from common/env_eeprom.c
rename to env/eeprom.c
diff --git a/common/env_embedded.c b/env/embedded.c
similarity index 100%
rename from common/env_embedded.c
rename to env/embedded.c
diff --git a/common/env_ext4.c b/env/ext4.c
similarity index 100%
rename from common/env_ext4.c
rename to env/ext4.c
diff --git a/common/env_fat.c b/env/fat.c
similarity index 100%
rename from common/env_fat.c
rename to env/fat.c
diff --git a/common/env_flags.c b/env/flags.c
similarity index 100%
rename from common/env_flags.c
rename to env/flags.c
diff --git a/common/env_flash.c b/env/flash.c
similarity index 100%
rename from common/env_flash.c
rename to env/flash.c
diff --git a/common/env_mmc.c b/env/mmc.c
similarity index 100%
rename from common/env_mmc.c
rename to env/mmc.c
diff --git a/common/env_nand.c b/env/nand.c
similarity index 100%
rename from common/env_nand.c
rename to env/nand.c
diff --git a/common/env_nowhere.c b/env/nowhere.c
similarity index 100%
rename from common/env_nowhere.c
rename to env/nowhere.c
diff --git a/common/env_nvram.c b/env/nvram.c
similarity index 100%
rename from common/env_nvram.c
rename to env/nvram.c
diff --git a/common/env_onenand.c b/env/onenand.c
similarity index 100%
rename from common/env_onenand.c
rename to env/onenand.c
diff --git a/common/env_remote.c b/env/remote.c
similarity index 100%
rename from common/env_remote.c
rename to env/remote.c
diff --git a/common/env_sata.c b/env/sata.c
similarity index 100%
rename from common/env_sata.c
rename to env/sata.c
diff --git a/common/env_sf.c b/env/sf.c
similarity index 100%
rename from common/env_sf.c
rename to env/sf.c
diff --git a/common/env_ubi.c b/env/ubi.c
similarity index 100%
rename from common/env_ubi.c
rename to env/ubi.c
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 0fbf457cdc..c56cbd9f54 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -161,8 +161,8 @@
 #define CONFIG_ENV_SECT_SIZE		0x2000
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text*);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text*);
 
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 57328c6269..c3fdc0b106 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -179,7 +179,7 @@
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o (.text);
+	env/embedded.o(.text);
 
 #ifdef NORFLASH_PS32BIT
 #	define CONFIG_ENV_OFFSET		(0x8000)
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index f6027e231f..df0733e6c2 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -85,8 +85,8 @@
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text);
 
 #define CONFIG_ENV_OFFSET		0x4000	/* Address of Environment Sector*/
 #define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 2bdfe80ef5..da8333ac6f 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -29,8 +29,8 @@
 #endif
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text*);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text*);
 
 /*
  * Command line configuration.
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index 0722ea19e3..5a2f0e204f 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -31,7 +31,7 @@
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o      (.text)
+	env/embedded.o(.text)
 
 /*
  * BOOTP options
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index e6bd7f3609..f5693d8178 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -39,8 +39,8 @@
 #endif
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text);
 
 /*
  * BOOTP options
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 6bcd6b6f2e..339a03c7b1 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -40,8 +40,8 @@
 #endif
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text);
 
 /*
  * BOOTP options
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index cc703aac19..3f2d9a9bac 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -32,7 +32,7 @@
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o (.text*);
+	env/embedded.o(.text*);
 
 /*
  * BOOTP options
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index d50c874fe1..a0c9dd904d 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -185,7 +185,7 @@
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o       (.text*)
+	env/embedded.o(.text*)
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 45cdf9da15..d6b5531833 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -189,8 +189,8 @@
 #define CONFIG_ENV_SECT_SIZE	0x2000
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text*);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text*);
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 26639fc41f..07dfe7aec3 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -189,8 +189,8 @@
 #define CONFIG_ENV_SECT_SIZE	0x2000
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text*);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text*);
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/amcore.h b/include/configs/amcore.h
index 0a40746112..5f8b6c5518 100644
--- a/include/configs/amcore.h
+++ b/include/configs/amcore.h
@@ -93,8 +93,8 @@
 #define CONFIG_ENV_SECT_SIZE		0x1000
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text*);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text*);
 
 /* memory map space for linux boot data */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 7e373a2ca4..985d77d126 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -300,7 +300,7 @@
 
 #define LDS_BOARD_TEXT \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o       (.text*)
+	env/embedded.o(.text*)
 
 #if ENABLE_JFFS
 /* JFFS Partition offset set */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index a3b7b219b3..c1c3013dc3 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -102,8 +102,8 @@
 #endif
 
 #define LDS_BOARD_TEXT \
-        . = DEFINED(env_offset) ? env_offset : .; \
-        common/env_embedded.o (.text);
+	. = DEFINED(env_offset) ? env_offset : .; \
+	env/embedded.o(.text);
 
 /*
  * BOOTP options
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index ac3c2c7f13..f25a8bf725 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -69,10 +69,10 @@ libs-y += common/init/
 
 # Special handling for a few options which support SPL/TPL
 ifeq ($(CONFIG_TPL_BUILD),y)
-libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
 libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
 else
-libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
 endif
 
diff --git a/tools/Makefile b/tools/Makefile
index 0743677dc8..a1790ebd59 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -37,7 +37,7 @@ hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
 HOSTCFLAGS_bmp_logo.o := -pedantic
 
 hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc
-envcrc-objs := envcrc.o lib/crc32.o common/env_embedded.o lib/sha1.o
+envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o
 
 hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr
 HOSTCFLAGS_gen_eth_addr.o := -pedantic
@@ -225,7 +225,7 @@ HOSTCFLAGS_sha256.o := -pedantic
 quiet_cmd_wrap = WRAP    $@
 cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
 
-$(obj)/lib/%.c $(obj)/common/%.c:
+$(obj)/lib/%.c $(obj)/common/%.c $(obj)/env/%.c:
 	$(call cmd,wrap)
 
 clean-dirs := lib common
-- 
2.14.0.rc0.400.g1c36432dff-goog



More information about the U-Boot mailing list