[U-Boot] [PATCH 2/8] arm64: zynqmp: Define a way to intialize TCM

[Michal Simek]

From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>

TCM on ZynqMP needs to be intialized in a sequence
and this patch provides a global routine to perform
this as per requirement.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/cpu/armv8/zynqmp/mp.c               | 15 +++++++++++++++
 arch/arm/include/asm/arch-zynqmp/sys_proto.h |  7 +++++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c
index e10fc3136c85..76f889ba7d9e 100644
--- a/arch/arm/cpu/armv8/zynqmp/mp.c
+++ b/arch/arm/cpu/armv8/zynqmp/mp.c
@@ -206,6 +206,21 @@ static void write_tcm_boot_trampoline(u32 boot_addr)
 	}
 }
 
+void initialize_tcm(bool mode)
+{
+	if (!mode) {
+		set_r5_tcm_mode(LOCK);
+		set_r5_halt_mode(HALT, LOCK);
+		enable_clock_r5();
+		release_r5_reset(LOCK);
+	} else {
+		set_r5_tcm_mode(SPLIT);
+		set_r5_halt_mode(HALT, SPLIT);
+		enable_clock_r5();
+		release_r5_reset(SPLIT);
+	}
+}
+
 int cpu_release(int nr, int argc, char * const argv[])
 {
 	if (nr >= ZYNQMP_CORE_APU0 && nr <= ZYNQMP_CORE_APU3) {
diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
index d91d98a1196c..3d7fad773115 100644
--- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
@@ -10,6 +10,11 @@
 
 #define PAYLOAD_ARG_CNT		5
 
+enum {
+	TCM_LOCK,
+	TCM_SPLIT,
+};
+
 int zynq_slcr_get_mio_pin_status(const char *periph);
 
 unsigned int zynqmp_get_silicon_version(void);
@@ -24,4 +29,6 @@ int zynqmp_mmio_read(const u32 address, u32 *value);
 int invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3,
 	       u32 *ret_payload);
 
+void initialize_tcm(bool mode);
+
 #endif /* _ASM_ARCH_SYS_PROTO_H */
-- 
1.9.1