[U-Boot] [PATCH 2/4] doc: uniphier: rework README.uniphier
Masahiro Yamada
yamada.masahiro at socionext.com
Thu Jul 13 11:32:16 UTC 2017
Rework the readme to reflect the latest boot mechanism on ARMv8 SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
doc/README.uniphier | 118 ++++++++++++++++++++++++++--------------------------
1 file changed, 59 insertions(+), 59 deletions(-)
diff --git a/doc/README.uniphier b/doc/README.uniphier
index e2f3b9a2ec23..f21c9d09ce3e 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -5,7 +5,7 @@ U-Boot for UniPhier SoC family
Recommended toolchains
----------------------
-The UniPhir platform is well tested with Linaro toolchanis.
+The UniPhier platform is well tested with Linaro toolchains.
You can download pre-built toolchains from:
http://www.linaro.org/downloads/
@@ -14,97 +14,97 @@ You can download pre-built toolchains from:
Compile the source
------------------
-sLD3 reference board:
- $ make uniphier_sld3_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+The source can be configured and built with the following commands:
-LD4 reference board:
- $ make uniphier_ld4_sld8_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+ $ make <defconfig>
+ $ make CROSS_COMPILE=<toolchain-prefix> DEVICE_TREE=<device-tree>
-sLD8 reference board:
- $ make uniphier_ld4_sld8_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-sld8-ref
+The recommended <toolchain-prefix> is `arm-linux-gnueabihf-` for 32bit SoCs,
+`aarch64-linux-gnu-` for 64bit SoCs, but you may wish to change it to use your
+favorite compiler.
-Pro4 reference board:
- $ make uniphier_pro4_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+The following tables show <defconfig> and <device-tree> for each board.
-Pro4 Ace board:
- $ make uniphier_pro4_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro4-ace
+32bit SoC boards:
-Pro4 Sanji board:
- $ make uniphier_pro4_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro4-sanji
+ Board | <defconfig> | <device-tree>
+---------------|------------------------------|------------------------------
+sLD3 reference | uniphier_sld3_defconfig | uniphier-sld3-ref (default)
+LD4 reference | uniphier_ld4_sld8_defconfig | uniphier-ld4-ref (default)
+sld8 reference | uniphier_ld4_sld8_defconfig | uniphier-sld8-def
+Pro4 reference | uniphier_pro4_defconfig | uniphier-pro4-ref (default)
+Pro4 Ace | uniphier_pro4_defconfig | uniphier-pro4-ace
+Pro4 Sanji | uniphier_pro4_defconfig | uniphier-pro4-sanji
+Pro5 4KBOX | uniphier_pxs2_ld6b_defconfig | uniphier-pro5-4kbox
+PXs2 Gentil | uniphier_pxs2_ld6b_defconfig | uniphier-pxs2-gentil
+PXs2 Vodka | uniphier_pxs2_ld6b_defconfig | uniphier-pxs2-vodka (default)
+LD6b reference | uniphier_pxs2_ld6b_defconfig | uniphier-ld6b-ref
-Pro5 4KBOX Board:
- $ make uniphier_pxs2_ld6b_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pro5-4kbox
+64bit SoC boards:
-PXs2 Gentil board:
- $ make uniphier_pxs2_ld6b_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pxs2-gentil
+ Board | <defconfig> | <device-tree>
+---------------|-----------------------|----------------------------
+LD11 reference | uniphier_v8_defconfig | uniphier-ld11-ref
+LD11 Global | uniphier_v8_defconfig | uniphier-ld11-global
+LD20 reference | uniphier_v8_defconfig | uniphier-ld20-ref (default)
+LD20 Global | uniphier_v8_defconfig | uniphier-ld20-global
-PXs2 Vodka board:
- $ make uniphier_pxs2_ld6b_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+For example, to compile the source for PXs2 Vodka board, run the following:
-LD6b reference board:
$ make uniphier_pxs2_ld6b_defconfig
- $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-ld6b-ref
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- DEVICE_TREE=uniphier-pxs2-vodka
-LD11 reference board:
- $ make uniphier_v8_defconfig
- $ make CROSS_COMPILE=aarch64-linux-gnu- DEVICE_TREE=uniphier-ld11-ref
+The device tree marked as (default) can be omitted. `uniphier-pxs2-vodka` is
+the default device tree for the configuration `uniphier_pxs2_ld6b_defconfig`,
+so the following gives the same result.
-LD20 reference board:
- $ make uniphier_v8_defconfig
- $ make CROSS_COMPILE=aarch64-linux-gnu-
-
-PXs3 reference board:
- $ make uniphier_v8_defconfig
- $ make CROSS_COMPILE=aarch64-linux-gnu- DEVICE_TREE=uniphier-pxs3-ref
+ $ make uniphier_pxs2_ld6b_defconfig
+ $ make CROSS_COMPILE=arm-linux-gnueabihf-
-You may wish to change the "CROSS_COMPILE=..." to use your favorite compiler.
+Booting 32bit SoC boards
+------------------------
-Burn U-Boot images to NAND
---------------------------
+The build command will generate the following:
+- u-boot.bin
+- spl/u-boot.bin
-Write the following to the NAND device:
+U-Boot can boot UniPhier 32bit SoC boards by itself. Flash the generated images
+to the storage device (NAND or eMMC) on your board.
- spl/u-boot-spl.bin at the offset address 0x00000000
- u-boot.bin at the offset address 0x00020000
-or
+The `u-boot-with-spl.bin` is the concatenation of the two (with appropriate
+padding), so you can also do:
- u-boot-with-spl.bin at the offset address 0x00000000
If a TFTP server is available, the images can be easily updated.
Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
-and then run the following command at the U-Boot command line:
+and run the following command at the U-Boot command line:
- => run nandupdate
+To update the images in NAND:
+ => run nandupdate
-Burn U-Boot images to eMMC
---------------------------
+To update the images in eMMC:
-Write the following to the Boot partition 1 of the eMMC device:
+ => run emmcupdate
- - spl/u-boot-spl.bin at the offset address 0x00000000
- - u-boot.bin at the offset address 0x00020000
-or
+Booting 64bit SoC boards
+------------------------
- - u-boot-with-spl.bin at the offset address 0x00000000
+The build command will generate the following:
+- u-boot.bin
-If a TFTP server is available, the images can be easily updated.
-Just copy the u-boot-spl.bin and u-boot.bin to the TFTP public directory,
-and then run the following command at the U-Boot command line:
+However, U-Boot is not the first stage loader for UniPhier 64bit SoC boards.
+U-Boot serves as a non-secure boot loader loaded by [ARM Trusted Firmware],
+so you need to provide the `u-boot.bin` to the build command of ARM Trusted
+Firmware.
- => run emmcupdate
+[ARM Trusted Firmware]: https://github.com/ARM-software/arm-trusted-firmware
UniPhier specific commands
@@ -179,4 +179,4 @@ newer SoCs. Even if it is, EA[25] is not connected on most of the boards.
--
Masahiro Yamada <yamada.masahiro at socionext.com>
-Jan. 2017
+Jul. 2017
--
2.7.4
More information about the U-Boot
mailing list