[U-Boot] [PATCH v3 00/13] usb: xhci: Add interrupt transfer support and full speed device support

[Bin Meng]

Hi Marek,

On Thu, Jul 20, 2017 at 7:12 AM, Bin Meng <bmeng.cn at gmail.com> wrote:
> This series is the final series of the xHCI driver update.
>
> This adds the missing interrupt transfer support to xHCI driver, so
> that devices like USB keyboard that uses interrupt transfer when
> CONFIG_SYS_USB_EVENT_POLL is defined can work.
>
> This also adds full speed device support. Unlike low/high/super speed
> devices, full speed device may report its endpoint 0 max packet size
> as 8/16/32/64. xHCI driver guesses 64 for the first attempt to get the
> initial 8 bytes device descriptor, and later adjusts the context for
> endpoint 0.
>
> This series also made several updates to xHCI driver to conform with
> the spec.
>
> Previous two series:
> [1]: usb: xhci: Fix USB xHCI support on Intel platform
> https://lists.denx.de/pipermail/u-boot/2017-June/296166.html
> [2]: usb: hub: Support USB 3.0 hubs
> https://lists.denx.de/pipermail/u-boot/2017-June/296284.html
>
> This series is available at u-boot-x86/xhci-working3 for testing.
>
> Changes in v3:
> - rebase on u-boot-usb/master
> - add changes to poplar.h
>
> Bin Meng (13):
>   usb: xhci: Add interrupt transfer support
>   usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board
>     configs
>   usb: kbd: kconfig: Set a default polling mechanism for USB keyboard
>   usb: Only get 64 bytes device descriptor for full speed devices
>   usb: Read device descriptor after device is addressed for xHCI
>   usb: xhci: Fix max packet size for full speed device endpoint 0
>   usb: hub: Clear port reset before usb_hub_port_connect_change()
>   usb: hub: Clear BH reset status change for a 3.0 hub
>   usb: Handle audio extension endpoint descriptor in usb_parse_config()
>   usb: xhci: Honor endpoint's interval
>   usb: xhci: Program max burst size for endpoint
>   usb: xhci: Set 'Error Count' to 0 for isoch endpoints
>   usb: xhci: Set 'Average TRB Length' to 8 for control endpoints
>

This is the last xHCI series I have. Can you please take a look and apply?

Regards,
Bin