[U-Boot] [PATCH 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable

[Jean-Jacques Hiblot]

From: Kishon Vijay Abraham I <kishon at ti.com>

Instead of sending STOP TRANSMISSION command from MMC core, enable
the auto command feature so that the Host Controller issues CMD12
automatically when last block transfer is completed.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
 drivers/mmc/omap_hsmmc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 3419dc5..3ee81bb 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -490,6 +490,10 @@ static int omap_hsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
 	ulong start;
 
 	mmc_base = priv->base_addr;
+
+	if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+		return 0;
+
 	start = get_timer(0);
 	while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) {
 		if (get_timer(0) - start > MAX_RETRY_MS) {
@@ -546,7 +550,7 @@ static int omap_hsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
 	if (data) {
 		if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) ||
 			 (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) {
-			flags |= (MSBS_MULTIBLK | BCE_ENABLE);
+			flags |= (MSBS_MULTIBLK | BCE_ENABLE | ACEN_ENABLE);
 			data->blocksize = 512;
 			writel(data->blocksize | (data->blocks << 16),
 							&mmc_base->blk);
-- 
1.9.1