[U-Boot] [U-Boot, v4, 3/4] rockchip: Add basic support for phyCORE-RK3288 SoM based carrier board

[Philipp Tomsich]

> The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC.
> The module can be connected to different carrier boards.
> It can be also equipped with different RAM, SPI flash and eMMC variants.
> The Rapid Development Kit option is using the following setup:
> 
>   - 1 GB DDR3 RAM (2 Banks)
>   - 1x 4 KB EEPROM
>   - DP83867 Gigabit Ethernet PHY
>   - 16 MB SPI Flash
>   - 4 GB eMMC Flash
> 
> Add basic support for the PCM-947 carrier board, a RK3288 based development
> board made by PHYTEC. This board works in a combination with
> the phyCORE-RK3288 System on Module.
> 
> Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> Acked-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> ---
> Changes in v4:
> - Use of_machine_is_compatible()
> - Wrap phycore_init()/of_machine_is_compatible() with CONFIG_SPL_OF_PLATDATA
>   and CONFIG_SPL_POWER_SUPPORT. Needed because of_machine_is_compatible() and
>   rk818_spl_configure_*() is not available with all rk3288 board configs.
> - Added Reviewed-by: Simon Glass <sjg at chromium.org>
> 
>  arch/arm/dts/Makefile                        |   1 +
>  arch/arm/dts/rk3288-phycore-rdk.dts          | 294 ++++++++++++++++
>  arch/arm/dts/rk3288-phycore-som.dtsi         | 506 +++++++++++++++++++++++++++
>  arch/arm/mach-rockchip/rk3288-board-spl.c    |  40 +++
>  arch/arm/mach-rockchip/rk3288/Kconfig        |  10 +
>  board/phytec/phycore_rk3288/Kconfig          |  15 +
>  board/phytec/phycore_rk3288/MAINTAINERS      |   6 +
>  board/phytec/phycore_rk3288/Makefile         |   8 +
>  board/phytec/phycore_rk3288/phycore-rk3288.c |   8 +
>  configs/phycore-rk3288_defconfig             |  70 ++++
>  include/configs/phycore_rk3288.h             |  23 ++
>  11 files changed, 981 insertions(+)
>  create mode 100644 arch/arm/dts/rk3288-phycore-rdk.dts
>  create mode 100644 arch/arm/dts/rk3288-phycore-som.dtsi
>  create mode 100644 board/phytec/phycore_rk3288/Kconfig
>  create mode 100644 board/phytec/phycore_rk3288/MAINTAINERS
>  create mode 100644 board/phytec/phycore_rk3288/Makefile
>  create mode 100644 board/phytec/phycore_rk3288/phycore-rk3288.c
>  create mode 100644 configs/phycore-rk3288_defconfig
>  create mode 100644 include/configs/phycore_rk3288.h
> 

Applied to u-boot-rockchip/next, thanks!