[U-Boot] [PATCH 1/2] rockchip: rk3288: Remove phy reset GPIO pull up

[Romain Perier]

We should not handle this pin explicitly from pinctrl. GMAC driver takes
care of it by using a "reset-gpio" in the DT.

This commit removes pull up for GPIO4B0.

Fixes: 2454b719fb87 ("rockchip: rk3288: Add pinctrl support for the...")
Signed-off-by: Romain Perier <romain.perier at collabora.com>
---
 drivers/pinctrl/rockchip/pinctrl_rk3288.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3288.c b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
index 3c9ae974f4..ba488f7ce6 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3288.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
@@ -501,11 +501,9 @@ static void pinctrl_rk3288_gmac_config(struct rk3288_grf *grf, int gmac_id)
 			     GPIO_BIAS_MASK << GPIO_BIAS_SHIFT(1),
 			     GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(1));
 
-		/* Set pull normal for GPIO4B1, pull up for GPIO4B0 */
+		/* Set pull normal for GPIO4B1 */
 		rk_clrsetreg(&grf->gpio1_p[3][1],
-			     (GPIO_PULL_MASK << GPIO_PULL_SHIFT(0)) |
 			     (GPIO_PULL_MASK << GPIO_PULL_SHIFT(1)),
-			     (GPIO_PULL_UP << GPIO_PULL_SHIFT(0)) |
 			     (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(1)));
 
 		break;
-- 
2.11.0