[U-Boot] [PATCH v2 12/56] spl: dm: Kconfig: split OF_CONTROL and OF_PLATDATA between SPL and TPL

[Philipp Tomsich]

For the RK3368, we want to use OF_PLATDATA in TPL, but full OF_CONTROL
in SPL: this requires the introduction of a new family of
configuration options to decouple SPL_OF_CONTROL and SPL_OF_PLATDATA
from TPL.

Consequently, Makefile.spl needs to be adjusted to test for these
configuration items through the $(SPL_TPL_) macro instead of
hard-coding the SPL variant.

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---

Changes in v2: None

 Makefile             |  2 +-
 dts/Kconfig          | 29 +++++++++++++++++++++++++++++
 scripts/Makefile.spl |  4 ++--
 3 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/Makefile b/Makefile
index 119ad49..d5cdf2a 100644
--- a/Makefile
+++ b/Makefile
@@ -1378,7 +1378,7 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
 spl/u-boot-spl.bin: spl/u-boot-spl
 	@:
 spl/u-boot-spl: tools prepare \
-		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
+		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),dts/dt.dtb)
 	$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
 
 spl/sunxi-spl.bin: spl/u-boot-spl
diff --git a/dts/Kconfig b/dts/Kconfig
index b3009af..bbadc32 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -32,6 +32,14 @@ config SPL_OF_CONTROL
 	  which is not enough to support device tree. Enable this option to
 	  allow such boards to be supported by U-Boot SPL.
 
+config TPL_OF_CONTROL
+	bool "Enable run-time configuration via Device Tree in TPL"
+	depends on TPL && OF_CONTROL
+	help
+	  Some boards use device tree in U-Boot but only have 4KB of SRAM
+	  which is not enough to support device tree. Enable this option to
+	  allow such boards to be supported by U-Boot TPL.
+
 config OF_LIVE
 	bool "Enable use of a live tree"
 	depends on OF_CONTROL
@@ -135,4 +143,25 @@ config SPL_OF_PLATDATA
 	  declarations for each node. See README.platdata for more
 	  information.
 
+config TPL_OF_PLATDATA
+	bool "Generate platform data for use in TPL"
+	depends on TPL_OF_CONTROL
+	help
+	  For very constrained SPL environments the overhead of decoding
+	  device tree nodes and converting their contents into platform data
+	  is too large. This overhead includes libfdt code as well as the
+	  device tree contents itself. The latter is fairly compact, but the
+	  former can add 3KB or more to a Thumb 2 Image.
+
+	  This option enables generation of platform data from the device
+	  tree as C code. This code creates devices using U_BOOT_DEVICE()
+	  declarations. The benefit is that it allows driver code to access
+	  the platform data directly in C structures, avoidin the libfdt
+	  overhead.
+
+	  This option works by generating C structure declarations for each
+	  compatible string, then adding platform data and U_BOOT_DEVICE
+	  declarations for each node. See README.platdata for more
+	  information.
+
 endmenu
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index ac3c2c7..3e35cd6 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -98,7 +98,7 @@ endif
 
 u-boot-spl-init := $(head-y)
 u-boot-spl-main := $(libs-y)
-ifdef CONFIG_SPL_OF_PLATDATA
+ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA
 u-boot-spl-platdata := $(obj)/dts/dt-platdata.o
 endif
 
@@ -202,7 +202,7 @@ cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 quiet_cmd_copy = COPY    $@
       cmd_copy = cp $< $@
 
-ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy)
+ifeq ($(CONFIG_$(SPL_TPL_)OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy)
 $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
 		$(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
 		$(obj)/$(SPL_BIN).dtb FORCE
-- 
2.1.4