[U-Boot] [PATCH 07/52] spl: dm: Kconfig: split REGMAP/SYSCON support for TPL from SPL

Philipp Tomsich philipp.tomsich at theobroma-systems.com
Tue Jul 18 20:35:47 UTC 2017


This change introduces TPL variants of the REGMAP and SYSCON config
options (i.e. TPL_REGMAP and TPL_SYSCON in analogy to SPL_REGMAP and
SPL_SYSCON) in preparation of a finer-grained feature selection for
building feature-rich TPL variants.

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---

 drivers/core/Kconfig  | 19 +++++++++++++++++++
 drivers/core/Makefile |  4 ++--
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index 01e6d71..6b5796b 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -105,6 +105,16 @@ config SPL_REGMAP
 	  support any bus type (I2C, SPI) but so far this only supports
 	  direct memory access.
 
+config TPL_REGMAP
+	bool "Support register maps in TPL"
+	depends on TPL_DM
+	help
+	  Hardware peripherals tend to have one or more sets of registers
+	  which can be accessed to control the hardware. A register map
+	  models this with a simple read/write interface. It can in principle
+	  support any bus type (I2C, SPI) but so far this only supports
+	  direct memory access.
+
 config SYSCON
 	bool "Support system controllers"
 	depends on REGMAP
@@ -123,6 +133,15 @@ config SPL_SYSCON
 	  by this uclass, including accessing registers via regmap and
 	  assigning a unique number to each.
 
+config TPL_SYSCON
+	bool "Support system controllers in TPL"
+	depends on TPL_REGMAP
+	help
+	  Many SoCs have a number of system controllers which are dealt with
+	  as a group by a single driver. Some common functionality is provided
+	  by this uclass, including accessing registers via regmap and
+	  assigning a unique number to each.
+
 config DEVRES
 	bool "Managed device resources"
 	depends on DM
diff --git a/drivers/core/Makefile b/drivers/core/Makefile
index 435cf98..dcfb1b0 100644
--- a/drivers/core/Makefile
+++ b/drivers/core/Makefile
@@ -9,8 +9,8 @@ obj-$(CONFIG_DEVRES) += devres.o
 obj-$(CONFIG_$(SPL_)DM_DEVICE_REMOVE)	+= device-remove.o
 obj-$(CONFIG_$(SPL_)SIMPLE_BUS)	+= simple-bus.o
 obj-$(CONFIG_DM)	+= dump.o
-obj-$(CONFIG_$(SPL_)REGMAP)	+= regmap.o
-obj-$(CONFIG_$(SPL_)SYSCON)	+= syscon-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)REGMAP)	+= regmap.o
+obj-$(CONFIG_$(SPL_TPL_)SYSCON)	+= syscon-uclass.o
 obj-$(CONFIG_OF_LIVE) += of_access.o of_addr.o
 ifndef CONFIG_DM_DEV_READ_INLINE
 obj-$(CONFIG_OF_CONTROL) += read.o
-- 
2.1.4



More information about the U-Boot mailing list