[U-Boot] [PATCH v3 06/10] rockchip: set malloc pool size to 0 before relocation in spl state on rk3036 based board

[Andy Yan]

RK3036 only has 4kb sram, the spl code will use
3.4 ~ 3.5 kb, the last 0.5kb are used for SP and
GD, so there is no space for malloc. Also, the spl
will directly return to bootrom after dram initialized,
they never need the space for malloc.

Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---

Changes in v3: None
Changes in v2: None

 configs/evb-rk3036_defconfig   | 1 +
 configs/kylin-rk3036_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/evb-rk3036_defconfig b/configs/evb-rk3036_defconfig
index 321ef71..78e2095 100644
--- a/configs/evb-rk3036_defconfig
+++ b/configs/evb-rk3036_defconfig
@@ -4,6 +4,7 @@ CONFIG_ROCKCHIP_RK3036=y
 CONFIG_TARGET_EVB_RK3036=y
 CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x0
 CONFIG_DEBUG_UART=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_STACK_R=y
diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig
index 715e4b2..fd20eff 100644
--- a/configs/kylin-rk3036_defconfig
+++ b/configs/kylin-rk3036_defconfig
@@ -4,6 +4,7 @@ CONFIG_ROCKCHIP_RK3036=y
 CONFIG_TARGET_KYLIN_RK3036=y
 CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="rk3036-sdk"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x0
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_STACK_R=y
 # CONFIG_CMD_IMLS is not set
-- 
2.7.4