[U-Boot] [PATCH 00/10] This patch set represent Marvell mvpp2 driver fixes

[Stefan Roese]

Hi Joe,

On 21.06.2017 10:31, stefanc at malvell.com wrote:
> From: Stefan Chulski <stefanc at marvell.com>
> 
> Issues were found during internal QA phase.
> 
> Stefan Chulski (10):
>    net: mvpp2x: Add GPIO configuration support
>    net: mvpp2x: fix phy connected to wrong mdio issue
>    net: mvpp2x: Enable GoP packet padding in TX
>    net: mvpp2x: fix BM configuration overrun issue
>    net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
>    net: mvpp2x: remove MBUS configurations from MvPP22 driver
>    net: mvpp2x: Remove IRQ configuration from u-boot
>    net: mvpp2x: Set BM pool high address
>    net: mvpp2x: remove TX drain from transmit routine
>    net: mvpp2x: Set BM poll size once during priv probe
> 
>   drivers/net/mvpp2.c | 189 ++++++++++++++++++++++++++--------------------------
>   1 file changed, 94 insertions(+), 95 deletions(-)

Joe, do you have any comments on these mvpp2 patches?

Thanks,
Stefan