[U-Boot] Nios II 10m50 is not working

[Gan, Yau Wai]

Hi Kirill,

Yes I did manage to debug using GDB and found the issue is with the device tree dm-pre-reloc for CPU. Thanks for confirming this.
I sent the patch so we can have fix for the 10m50 board. I am using the golden hardware reference design which has MMU enabled.

Best regards,
Yau Wai

-----Original Message-----
From: Kirill Smirnov [mailto:kirill.k.smirnov at gmail.com] 
Sent: Wednesday, July 26, 2017 6:00 PM
To: Gan, Yau Wai <yau.wai.gan at intel.com>; u-boot at lists.denx.de
Subject: [U-Boot] Nios II 10m50 is not working

Hi, Yau

I had a very similar problem with my project. It was sufficient for me to add "u-boot,dm-pre-reloc" stanza to cpu node only. This is necessary to properly setup mmu/nommu-related memory mappings. Other nodes remain unchanged.

The resulting cpu node (omitting details) is as follows:

                cpu: cpu at 0x0 {
                        device_type = "cpu";
                        compatible = "altr,nios2-16.0", "altr,nios2-1.1";
                        reg = <0x00000000>;
                        u-boot,dm-pre-reloc; ....
                }

This works for my custom no-mmu project. Unfortunately, I cannot test this solution on other boards.


-----------

On Thu Jul 6 14:30:54 UTC 2017 Gan, Yau Wai wrote:


I tried adding the dm-pre-reloc line to every node and sub-node, but it doesn’t help.


On 06/07/2017, 8:26 PM, "Lothar Waßmann" <LW at KARO-electronics.de> wrote:

>Hi,
>
>On Thu, 6 Jul 2017 10:32:57 +0000 Gan, Yau Wai wrote:
>> U-boot for Nios II on the 10m50 dev board is not functioning. The serial terminal prints nothing upon booting up. The u-boot image is loaded via GDB/JTAG to the FPGA on-chip RAM.
>>
>> Bisect activities were carried and discovered that the change from using dm_scan_fdt_node to dm_scan_fdt_dev in the simple_bus.c. This leads to suspecting the 10m50_devboard.dts need update to include "u-boot,dm-pre-reloc".
>>
>u-boot,dm-pre-reloc has to be present in each item of the DT path 
>leading to the node where you need it.
>
>
>Lothar Waßmann