[U-Boot] [PATCH v3 12/13] usb: xhci: Set 'Error Count' to 0 for isoch endpoints

[Bin Meng]

Per xHCI spec, 'Error Count' should be set to 0 for isoch endpoints.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

Changes in v3: None

 drivers/usb/host/xhci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b039ab0..3508004 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -512,6 +512,7 @@ static int xhci_set_configuration(struct usb_device *udev)
 	unsigned int mult;
 	unsigned int max_burst;
 	unsigned int avg_trb_len;
+	unsigned int err_count = 0;
 
 	out_ctx = virt_dev->out_ctx;
 	in_ctx = virt_dev->in_ctx;
@@ -589,9 +590,12 @@ static int xhci_set_configuration(struct usb_device *udev)
 			cpu_to_le32(MAX_PACKET
 			(get_unaligned(&endpt_desc->wMaxPacketSize)));
 
+		/* Allow 3 retries for everything but isoc, set CErr = 3 */
+		if (!usb_endpoint_xfer_isoc(endpt_desc))
+			err_count = 3;
 		ep_ctx[ep_index]->ep_info2 |=
 			cpu_to_le32(MAX_BURST(max_burst)|
-			((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT));
+			ERROR_COUNT(err_count));
 
 		trb_64 = (uintptr_t)
 				virt_dev->eps[ep_index].ring->enqueue;
-- 
2.9.2