[U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR

[Fabio Estevam]

Hi Eric,

On Tue, Nov 1, 2016 at 5:13 PM, Eric Nelson <eric at nelint.com> wrote:
> This is a virtual "board" that uses configuration files and
> Kconfig to define the memory layout used by a real board during
> the board bring-up process.
>
> It generates an SPL image that can be loaded using imx_usb or
> SB_LOADER.exe.
>
> When run, it will generate a set of calibration constants for
> use in either or both a DCD configuration file for boards that
> use u-boot.imx or struct mx6_mmdc_calibration for boards that
> boot via SPL.
>
> In essence, it is a configurable, open-source variant of the
> Freescale ddr-stress tool.
>
>         https://community.nxp.com/docs/DOC-105652
>
> File mx6memcal_defconfig configures the board for use with
> mx6sabresd or mx6qsabreauto.

Do you still have plans on refreshing this series?

It does seem very useful.

Thanks