[U-Boot] [PATCH v2 8/8] sf: add driver for Atmel QSPI controller
Wenyou Yang
wenyou.yang at microchip.com
Thu Jul 20 07:48:49 UTC 2017
From: Cyrille Pitchen <cyrille.pitchen at atmel.com>
This patch adds support to the Atmel Quad SPI controller.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen at atmel.com>
Signed-off-by: Wenyou Yang <wenyou.yang at microchip.com>
---
Changes in v2:
- Rebase on the latest u-boot/master(2710d54f5).
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/atmel_qspi.c | 404 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/atmel_qspi.h | 169 ++++++++++++++++++++
4 files changed, 581 insertions(+)
create mode 100644 drivers/spi/atmel_qspi.c
create mode 100644 drivers/spi/atmel_qspi.h
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8a8e8e480f..b3e8cb941e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -32,6 +32,13 @@ config ATH79_SPI
uses driver model and requires a device tree binding to operate.
please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
+config ATMEL_QSPI
+ bool "Atmel QSPI driver"
+ depends on ARCH_AT91
+ help
+ Enable the Ateml Quad-SPI (QSPI) driver. This driver can only be
+ used to access SPI NOR flashes.
+
config ATMEL_SPI
bool "Atmel SPI driver"
depends on ARCH_AT91
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 9f8b86de76..358db2b065 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -18,6 +18,7 @@ endif
obj-$(CONFIG_ALTERA_SPI) += altera_spi.o
obj-$(CONFIG_ATH79_SPI) += ath79_spi.o
obj-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
+obj-$(CONFIG_ATMEL_QSPI) += atmel_qspi.o
obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o
obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
obj-$(CONFIG_CF_SPI) += cf_spi.o
diff --git a/drivers/spi/atmel_qspi.c b/drivers/spi/atmel_qspi.c
new file mode 100644
index 0000000000..0af7a4dc0a
--- /dev/null
+++ b/drivers/spi/atmel_qspi.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2017 Atmel Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <errno.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <mach/clk.h>
+#include "atmel_qspi.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void atmel_qspi_memcpy_fromio(void *dst, unsigned long src, size_t len)
+{
+ u8 *d = (u8 *)dst;
+
+ while (len--) {
+ *d++ = readb(src);
+ src++;
+ }
+}
+
+static void atmel_qspi_memcpy_toio(unsigned long dst, const void *src,
+ size_t len)
+{
+ const u8 *s = (const u8 *)src;
+
+ while (len--) {
+ writeb(*s, dst);
+ dst++;
+ s++;
+ }
+}
+
+static int atmel_qspi_set_ifr_tfrtype(u8 flags, u32 *ifr)
+{
+ u32 ifr_tfrtype;
+
+ switch (flags & SPI_FCMD_TYPE) {
+ case SPI_FCMD_READ:
+ ifr_tfrtype = QSPI_IFR_TFRTYPE_READ_MEMORY;
+ break;
+
+ case SPI_FCMD_WRITE:
+ ifr_tfrtype = QSPI_IFR_TFRTYPE_WRITE_MEMORY;
+ break;
+
+ case SPI_FCMD_ERASE:
+ case SPI_FCMD_WRITE_REG:
+ ifr_tfrtype = QSPI_IFR_TFRTYPE_WRITE;
+ break;
+
+ case SPI_FCMD_READ_REG:
+ ifr_tfrtype = QSPI_IFR_TFRTYPE_READ;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ *ifr = (*ifr & ~QSPI_IFR_TFRTYPE) | ifr_tfrtype;
+ return 0;
+}
+
+static int atmel_qpsi_set_ifr_width(enum spi_flash_protocol proto, u32 *ifr)
+{
+ u32 ifr_width;
+
+ switch (proto) {
+ case SPI_FPROTO_1_1_1:
+ ifr_width = QSPI_IFR_WIDTH_SINGLE_BIT_SPI;
+ break;
+
+ case SPI_FPROTO_1_1_2:
+ ifr_width = QSPI_IFR_WIDTH_DUAL_OUTPUT;
+ break;
+
+ case SPI_FPROTO_1_2_2:
+ ifr_width = QSPI_IFR_WIDTH_DUAL_IO;
+ break;
+
+ case SPI_FPROTO_2_2_2:
+ ifr_width = QSPI_IFR_WIDTH_DUAL_CMD;
+ break;
+
+ case SPI_FPROTO_1_1_4:
+ ifr_width = QSPI_IFR_WIDTH_QUAD_OUTPUT;
+ break;
+
+ case SPI_FPROTO_1_4_4:
+ ifr_width = QSPI_IFR_WIDTH_QUAD_IO;
+ break;
+
+ case SPI_FPROTO_4_4_4:
+ ifr_width = QSPI_IFR_WIDTH_QUAD_CMD;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ *ifr = (*ifr & ~QSPI_IFR_WIDTH) | ifr_width;
+ return 0;
+}
+
+static int atmel_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ /* This controller can only be used with SPI NOR flashes. */
+ return -EINVAL;
+}
+
+static int atmel_qspi_set_speed(struct udevice *bus, uint hz)
+{
+ struct atmel_qspi_priv *aq = dev_get_priv(bus);
+ u32 scr, scbr, mask, new_value;
+
+ /* Compute the QSPI baudrate */
+ scbr = DIV_ROUND_UP(aq->bus_clk_rate, hz);
+ if (scbr > 0)
+ scbr--;
+
+ new_value = QSPI_SCR_SCBR_(scbr);
+ mask = QSPI_SCR_SCBR;
+
+ scr = qspi_readl(aq, QSPI_SCR);
+ if ((scr & mask) == new_value)
+ return 0;
+
+ scr = (scr & ~mask) | new_value;
+ qspi_writel(aq, QSPI_SCR, scr);
+
+ return 0;
+}
+
+static int atmel_qspi_set_mode(struct udevice *bus, uint mode)
+{
+ struct atmel_qspi_priv *aq = dev_get_priv(bus);
+ u32 scr, mask, new_value;
+
+ new_value = (QSPI_SCR_CPOL_((mode & SPI_CPOL) != 0) |
+ QSPI_SCR_CPHA_((mode & SPI_CPHA) != 0));
+ mask = (QSPI_SCR_CPOL | QSPI_SCR_CPHA);
+
+ scr = qspi_readl(aq, QSPI_SCR);
+ if ((scr & mask) == new_value)
+ return 0;
+
+ scr = (scr & ~mask) | new_value;
+ qspi_writel(aq, QSPI_SCR, scr);
+
+ return 0;
+}
+
+static bool
+atmel_qspi_is_flash_command_supported(struct udevice *dev,
+ const struct spi_flash_command *cmd)
+{
+ return true;
+}
+
+static int atmel_qspi_exec_flash_command(struct udevice *dev,
+ const struct spi_flash_command *cmd)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct atmel_qspi_priv *aq = dev_get_priv(bus);
+ unsigned int iar, icr, ifr;
+ unsigned int offset;
+ unsigned int imr, sr;
+ unsigned long memaddr;
+ int err;
+
+ iar = 0;
+ icr = 0;
+ ifr = 0;
+
+ err = atmel_qspi_set_ifr_tfrtype(cmd->flags, &ifr);
+ if (err)
+ return err;
+
+ err = atmel_qpsi_set_ifr_width(cmd->proto, &ifr);
+ if (err)
+ return err;
+
+ /* Compute instruction parameters */
+ icr |= QSPI_ICR_INST_(cmd->inst);
+ ifr |= QSPI_IFR_INSTEN;
+
+ /* Compute address parameters. */
+ switch (cmd->addr_len) {
+ case 4:
+ ifr |= QSPI_IFR_ADDRL_32_BIT;
+ /*break;*/ /* fall through the 24bit (3 byte) address case */
+ case 3:
+ iar = cmd->data_len ? 0 : cmd->addr;
+ ifr |= QSPI_IFR_ADDREN;
+ offset = cmd->addr;
+ break;
+ case 0:
+ offset = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Compute option parameters. */
+ if (cmd->num_mode_cycles) {
+ unsigned int mode_cycle_bits, mode_bits;
+
+ icr |= QSPI_ICR_OPT_(cmd->mode);
+ ifr |= QSPI_IFR_OPTEN;
+
+ switch (ifr & QSPI_IFR_WIDTH) {
+ case QSPI_IFR_WIDTH_SINGLE_BIT_SPI:
+ case QSPI_IFR_WIDTH_DUAL_OUTPUT:
+ case QSPI_IFR_WIDTH_QUAD_OUTPUT:
+ mode_cycle_bits = 1;
+ break;
+ case QSPI_IFR_WIDTH_DUAL_IO:
+ case QSPI_IFR_WIDTH_DUAL_CMD:
+ mode_cycle_bits = 2;
+ break;
+ case QSPI_IFR_WIDTH_QUAD_IO:
+ case QSPI_IFR_WIDTH_QUAD_CMD:
+ mode_cycle_bits = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mode_bits = cmd->num_mode_cycles * mode_cycle_bits;
+ switch (mode_bits) {
+ case 1:
+ ifr |= QSPI_IFR_OPTL_1BIT;
+ break;
+
+ case 2:
+ ifr |= QSPI_IFR_OPTL_2BIT;
+ break;
+
+ case 4:
+ ifr |= QSPI_IFR_OPTL_4BIT;
+ break;
+
+ case 8:
+ ifr |= QSPI_IFR_OPTL_8BIT;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+ /* Set the number of dummy cycles. */
+ if (cmd->num_wait_states)
+ ifr |= QSPI_IFR_NBDUM_(cmd->num_wait_states);
+
+ /* Set data enable. */
+ if (cmd->data_len)
+ ifr |= QSPI_IFR_DATAEN;
+
+ /* Clear pending interrupts. */
+ (void)qspi_readl(aq, QSPI_SR);
+
+ /* Set QSPI Instruction Frame registers. */
+ qspi_writel(aq, QSPI_IAR, iar);
+ qspi_writel(aq, QSPI_ICR, icr);
+ qspi_writel(aq, QSPI_IFR, ifr);
+
+ /* Skip to the final steps if there is no data. */
+ if (!cmd->data_len)
+ goto no_data;
+
+ /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses. */
+ (void)qspi_readl(aq, QSPI_IFR);
+
+ /* Stop here for Continuous Read. */
+ memaddr = (unsigned long)(aq->membase + offset);
+ if (cmd->tx_data)
+ /* Write data. */
+ atmel_qspi_memcpy_toio(memaddr, cmd->tx_data, cmd->data_len);
+ else if (cmd->rx_data)
+ /* Read data. */
+ atmel_qspi_memcpy_fromio(cmd->rx_data, memaddr, cmd->data_len);
+
+ /* Release the chip-select. */
+ qspi_writel(aq, QSPI_CR, QSPI_CR_LASTXFER);
+
+no_data:
+ /* Poll INSTruction End and Chip Select Rise flags. */
+ imr = QSPI_SR_INSTRE | QSPI_SR_CSR;
+ sr = 0;
+ while (sr != (QSPI_SR_INSTRE | QSPI_SR_CSR))
+ sr |= qspi_readl(aq, QSPI_SR) & imr;
+
+ return 0;
+}
+
+
+static const struct dm_spi_ops atmel_qspi_ops = {
+ .xfer = atmel_qspi_xfer,
+ .set_speed = atmel_qspi_set_speed,
+ .set_mode = atmel_qspi_set_mode,
+ .is_flash_command_supported = atmel_qspi_is_flash_command_supported,
+ .exec_flash_command = atmel_qspi_exec_flash_command,
+};
+
+static int atmel_qspi_enable_clk(struct udevice *bus)
+{
+ struct atmel_qspi_priv *aq = dev_get_priv(bus);
+ struct clk clk;
+ ulong clk_rate;
+ int ret;
+
+ ret = clk_get_by_index(bus, 0, &clk);
+ if (ret)
+ return -EINVAL;
+
+ ret = clk_enable(&clk);
+ if (ret)
+ goto free_clock;
+
+ clk_rate = clk_get_rate(&clk);
+ if (!clk_rate) {
+ ret = -EINVAL;
+ goto free_clock;
+ }
+
+ aq->bus_clk_rate = clk_rate;
+
+free_clock:
+ clk_free(&clk);
+
+ return ret;
+}
+
+static int atmel_qspi_probe(struct udevice *bus)
+{
+ const struct atmel_qspi_platdata *plat = dev_get_platdata(bus);
+ struct atmel_qspi_priv *aq = dev_get_priv(bus);
+ u32 mr;
+ int ret;
+
+ ret = atmel_qspi_enable_clk(bus);
+ if (ret)
+ return ret;
+
+ aq->regbase = plat->regbase;
+ aq->membase = plat->membase;
+
+ /* Reset the QSPI controler */
+ qspi_writel(aq, QSPI_CR, QSPI_CR_SWRST);
+
+ /* Set the QSPI controller in Serial Memory Mode */
+ mr = (QSPI_MR_NBBITS_8_BIT |
+ QSPI_MR_SMM_MEMORY |
+ QSPI_MR_CSMODE_LASTXFER);
+ qspi_writel(aq, QSPI_MR, mr);
+
+ /* Enable the QSPI controller */
+ qspi_writel(aq, QSPI_CR, QSPI_CR_QSPIEN);
+
+ return 0;
+}
+
+static int atmel_qspi_ofdata_to_platdata(struct udevice *bus)
+{
+ struct atmel_qspi_platdata *plat = dev_get_platdata(bus);
+ const void *blob = gd->fdt_blob;
+ int node = dev_of_offset(bus);
+ u32 data[4];
+ int ret;
+
+ ret = fdtdec_get_int_array(blob, node, "reg", data, ARRAY_SIZE(data));
+ if (ret) {
+ printf("Error: Can't get base addresses (ret=%d)!\n", ret);
+ return -ENODEV;
+ }
+ plat->regbase = (void *)data[0];
+ plat->membase = (void *)data[2];
+
+ return 0;
+}
+
+static const struct udevice_id atmel_qspi_ids[] = {
+ { .compatible = "atmel,sama5d2-qspi" },
+ { }
+};
+
+U_BOOT_DRIVER(atmel_qspi) = {
+ .name = "atmel_qspi",
+ .id = UCLASS_SPI,
+ .of_match = atmel_qspi_ids,
+ .ops = &atmel_qspi_ops,
+ .ofdata_to_platdata = atmel_qspi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct atmel_qspi_platdata),
+ .priv_auto_alloc_size = sizeof(struct atmel_qspi_priv),
+ .probe = atmel_qspi_probe,
+};
diff --git a/drivers/spi/atmel_qspi.h b/drivers/spi/atmel_qspi.h
new file mode 100644
index 0000000000..ee1a14bd72
--- /dev/null
+++ b/drivers/spi/atmel_qspi.h
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2016
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ATMEL_QSPI_H__
+#define __ATMEL_QSPI_H__
+
+/*
+ * Register Definitions
+ */
+#define QSPI_CR 0x00 /* Control Register */
+#define QSPI_MR 0x04 /* Mode Register */
+#define QSPI_RDR 0x08 /* Receive Data Register */
+#define QSPI_TDR 0x0c /* Transmit Data Register */
+#define QSPI_SR 0x10 /* Status Register */
+#define QSPI_IER 0x14 /* Interrupt Enable Register */
+#define QSPI_IDR 0x18 /* Interrupt Disable Register */
+#define QSPI_IMR 0x1c /* Interrupt Mask Register */
+#define QSPI_SCR 0x20 /* Serial Clock Register */
+#define QSPI_IAR 0x30 /* Instruction Address Register */
+#define QSPI_ICR 0x34 /* Instruction Code Register */
+#define QSPI_IFR 0x38 /* Instruction Frame Register */
+/* 0x3c Reserved */
+#define QSPI_SMR 0x40 /* Scrambling Mode Register */
+#define QSPI_SKR 0x44 /* Scrambling Key Register */
+/* 0x48 ~ 0xe0 */
+#define QSPI_WPMR 0xe4 /* Write Protection Mode Register */
+#define QSPI_WPSR 0xe8 /* Write Protection Status Register */
+/* 0xec ~ 0xf8 Reserved */
+/* 0xfc Reserved */
+
+/*
+ * Register Field Definitions
+ */
+/* QSPI_CR */
+#define QSPI_CR_QSPIEN BIT(0) /* QSPI Enable */
+#define QSPI_CR_QSPIDIS BIT(1) /* QSPI Disable */
+#define QSPI_CR_SWRST BIT(7) /* QSPI Software Reset */
+#define QSPI_CR_LASTXFER BIT(24) /* Last Transfer */
+
+/* QSPI_MR */
+#define QSPI_MR_SMM BIT(0) /* Serial Memort Mode */
+#define QSPI_MR_SMM_SPI 0
+#define QSPI_MR_SMM_MEMORY QSPI_MR_SMM
+#define QSPI_MR_LLB BIT(1) /* Local Localback Enable */
+#define QSPI_MR_LLB_DISABLED 0
+#define QSPI_MR_LLB_ENABLED QSPI_MR_LLB
+#define QSPI_MR_WDRBT BIT(2) /* Wait Data Read Before Transfer */
+#define QSPI_MR_WDRBT_DISABLED 0
+#define QSPI_MR_WDRBT_ENABLED QSPI_MR_WDRBT
+#define QSPI_MR_SMRM BIT(3) /* Serial Memory Register Mode */
+#define QSPI_MR_SMRM_AHB 0
+#define QSPI_MR_SMRM_APB QSPI_MR_SMRM
+#define QSPI_MR_CSMODE GENMASK(5, 4) /* Chip Select Mode */
+#define QSPI_MR_CSMODE_NOT_RELOADED (0x0u << 4)
+#define QSPI_MR_CSMODE_LASTXFER (0x1u << 4)
+#define QSPI_MR_CSMODE_SYSTEMATICALLY (0x2u << 4)
+#define QSPI_MR_NBBITS GENMASK(11, 8) /*
+ * Number of Bits Per
+ * Transfer
+ */
+#define QSPI_MR_NBBITS_8_BIT (0x0u << 8)
+#define QSPI_MR_NBBITS_16_BIT (0x8u << 8)
+#define QSPI_MR_DLYBCT GENMASK(23, 16) /*
+ * Delay Between Consecutive
+ * Transfers
+ */
+#define QSPI_MR_DLYCS GENMASK(31, 24) /* Minimum Inactive QCS Delay */
+
+/* QSPI_SR */
+#define QSPI_SR_RDRF BIT(0) /* Receive Data Register Full */
+#define QSPI_SR_TDRE BIT(1) /* Transmit Data Register Empty */
+#define QSPI_SR_TXEMPTY BIT(2) /* Transmission Registers Empty */
+#define QSPI_SR_OVRES BIT(3) /* Overrun Error Status */
+#define QSPI_SR_CSR BIT(8) /* Chip Select Rise */
+#define QSPI_SR_CSS BIT(9) /* Chip Select Status */
+#define QSPI_SR_INSTRE BIT(10) /* Instruction End Status */
+#define QSPI_SR_QSPIENS BIT(24) /* QSPI Enable Status */
+
+/* QSPI_SCR */
+#define QSPI_SCR_CPOL BIT(0) /* Clock Polarity */
+#define QSPI_SCR_CPOL_(x) ((x) << 0)
+#define QSPI_SCR_CPHA BIT(1) /* Clock Phase */
+#define QSPI_SCR_CPHA_(x) ((x) << 1)
+#define QSPI_SCR_SCBR GENMASK(15, 8) /* Serial Clock Baud Rate */
+#define QSPI_SCR_SCBR_(x) (((x) << 8) & QSPI_SCR_SCBR)
+#define QSPI_SCR_DLYBS GENMASK(23, 16)
+#define QSPI_SCR_DLYBS_(x) (((x) << 16) & QSPI_SCR_DLYBS) /*
+ * Delay Before
+ * QSCK
+ */
+
+/* QSPI_ICR */
+#define QSPI_ICR_INST GENMASK(7, 0)
+#define QSPI_ICR_INST_(x) (((x) << 0) & QSPI_ICR_INST) /*
+ * Instruction
+ * Code
+ */
+#define QSPI_ICR_OPT GENMASK(23, 16)
+#define QSPI_ICR_OPT_(x) (((x) << 16) & QSPI_ICR_OPT) /*
+ * Option
+ * Code
+ */
+
+/* QSPI_IFR */
+#define QSPI_IFR_WIDTH GENMASK(2, 0) /*
+ * Width of Instruction Code,
+ * Address, Option Code and Data
+ */
+#define QSPI_IFR_WIDTH_SINGLE_BIT_SPI (0x0u << 0)
+#define QSPI_IFR_WIDTH_DUAL_OUTPUT (0x1u << 0)
+#define QSPI_IFR_WIDTH_QUAD_OUTPUT (0x2u << 0)
+#define QSPI_IFR_WIDTH_DUAL_IO (0x3u << 0)
+#define QSPI_IFR_WIDTH_QUAD_IO (0x4u << 0)
+#define QSPI_IFR_WIDTH_DUAL_CMD (0x5u << 0)
+#define QSPI_IFR_WIDTH_QUAD_CMD (0x6u << 0)
+#define QSPI_IFR_WIDTH_(x) (((x) << 0) & QSPI_IFR_WIDTH)
+#define QSPI_IFR_INSTEN BIT(4) /* Instruction Enable*/
+#define QSPI_IFR_ADDREN BIT(5) /* Address Enable*/
+#define QSPI_IFR_OPTEN BIT(6) /* Option Enable*/
+#define QSPI_IFR_DATAEN BIT(7) /* Data Enable*/
+#define QSPI_IFR_OPTL GENMASK(9, 8) /* Option Code Length */
+#define QSPI_IFR_OPTL_1BIT (0x0u << 8)
+#define QSPI_IFR_OPTL_2BIT (0x1u << 8)
+#define QSPI_IFR_OPTL_4BIT (0x2u << 8)
+#define QSPI_IFR_OPTL_8BIT (0x3u << 8)
+#define QSPI_IFR_ADDRL BIT(10) /* Address Length */
+#define QSPI_IFR_ADDRL_24_BIT 0
+#define QSPI_IFR_ADDRL_32_BIT QSPI_IFR_ADDRL
+#define QSPI_IFR_TFRTYPE GENMASK(13, 12) /* Data Transfer Type */
+#define QSPI_IFR_TFRTYPE_READ (0x0u << 12)
+#define QSPI_IFR_TFRTYPE_READ_MEMORY (0x1u << 12)
+#define QSPI_IFR_TFRTYPE_WRITE (0x2u << 12)
+#define QSPI_IFR_TFRTYPE_WRITE_MEMORY (0x3u << 12)
+#define QSPI_IFR_TFRTYPE_(x) (((x) << 12) & QSPI_IFR_TFRTYPE)
+#define QSPI_IFR_CRM BIT(14) /* Continuous Read Mode */
+#define QSPI_IFR_NBDUM GENMASK(20, 16)
+#define QSPI_IFR_NBDUM_(x) (((x) << 16) & QSPI_IFR_NBDUM) /*
+ * Number Of
+ * Dummy Cycles
+ */
+
+
+struct atmel_qspi_platdata {
+ void *regbase;
+ void *membase;
+};
+
+struct atmel_qspi_priv {
+ ulong bus_clk_rate;
+ void *regbase;
+ void *membase;
+};
+
+#include <asm/io.h>
+
+static inline u32 qspi_readl(struct atmel_qspi_priv *aq, u32 reg)
+{
+ return readl(aq->regbase + reg);
+}
+
+static inline void qspi_writel(struct atmel_qspi_priv *aq, u32 reg, u32 value)
+{
+ writel(value, aq->regbase + reg);
+}
+
+#endif /* __ATMEL_QSPI_H__ */
--
2.13.0
More information about the U-Boot
mailing list