[U-Boot] [PATCH 7/7] board: at91sam9x5ek: Convert to support DM_VIDEO
Wenyou Yang
wenyou.yang at microchip.com
Mon Jul 31 06:02:30 UTC 2017
Convert the board to enable the driver model support for LCD/video.
Signed-off-by: Wenyou Yang <wenyou.yang at microchip.com>
---
arch/arm/mach-at91/Kconfig | 1 +
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 111 ++-----------------------------
configs/at91sam9x5ek_dataflash_defconfig | 3 +-
configs/at91sam9x5ek_mmc_defconfig | 3 +-
configs/at91sam9x5ek_nandflash_defconfig | 3 +-
configs/at91sam9x5ek_spiflash_defconfig | 3 +-
include/configs/at91sam9x5ek.h | 10 ---
7 files changed, 16 insertions(+), 118 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3cc37f431b..9f39e210b1 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -85,6 +85,7 @@ config TARGET_AT91SAM9X5EK
select CPU_ARM926EJS
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
config TARGET_SAMA5D2_PTC
bool "SAMA5D2 PTC board"
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 2452e63881..3d1763b1e2 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -13,12 +13,6 @@
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <debug_uart.h>
-#include <lcd.h>
-#include <atmel_hlcdc.h>
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-#endif
#include <asm/mach-types.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -86,103 +80,15 @@ static void at91sam9x5ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 24000000,
- .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_clk_pol = 1,
- .vl_hsync_len = 128,
- .vl_left_margin = 64,
- .vl_right_margin = 64,
- .vl_vsync_len = 2,
- .vl_upper_margin = 22,
- .vl_lower_margin = 21,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
- if (has_lcdc())
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
-}
-
-void lcd_disable(void)
-{
- if (has_lcdc())
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
-}
-
-static void at91sam9x5ek_lcd_hw_init(void)
-{
- if (has_lcdc()) {
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
-
- at91_periph_clk_enable(ATMEL_ID_LCDC);
- }
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- if (has_lcdc()) {
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_printf("(C) 2012 ATMEL Corp\n");
- lcd_printf("at91support at atmel.com\n");
- lcd_printf("%s CPU at %s MHz\n",
- get_cpu_name(),
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += get_nand_dev_by_index(i)->size;
- lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20);
- }
+#ifdef CONFIG_DM_VIDEO
+ at91_video_show_board_info();
+#endif
+ return 0;
}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
@@ -216,9 +122,6 @@ int board_init(void)
#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI_HCD)
at91_uhp_hw_init();
#endif
-#ifdef CONFIG_LCD
- at91sam9x5ek_lcd_hw_init();
-#endif
return 0;
}
diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig
index 8fc457b28c..fa1f7dffd9 100644
--- a/configs/at91sam9x5ek_dataflash_defconfig
+++ b/configs/at91sam9x5ek_dataflash_defconfig
@@ -54,4 +54,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig
index 1b76127934..04ff0a21c8 100644
--- a/configs/at91sam9x5ek_mmc_defconfig
+++ b/configs/at91sam9x5ek_mmc_defconfig
@@ -54,5 +54,6 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
CONFIG_FAT_WRITE=y
diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
index 23ef8072a3..da983408b7 100644
--- a/configs/at91sam9x5ek_nandflash_defconfig
+++ b/configs/at91sam9x5ek_nandflash_defconfig
@@ -54,4 +54,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig
index 48c2559c52..bc81f7ab50 100644
--- a/configs/at91sam9x5ek_spiflash_defconfig
+++ b/configs/at91sam9x5ek_spiflash_defconfig
@@ -54,4 +54,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_LCD=y
+CONFIG_DM_VIDEO=y
+CONFIG_ATMEL_HLCD=y
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 7e8a9e921a..7887791c37 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -27,16 +27,6 @@
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
-/* LCD */
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-
/*
* BOOTP options
*/
--
2.13.0
More information about the U-Boot
mailing list