[U-Boot] Sinovoip Bananapi M1+ defconfig

[krichy at nmdps.net]

 From aa8cd8708d71ef302e78474af6713477263bdd6f Mon Sep 17 00:00:00 2001
 From: Richard Kojedzinszky <krichy at nmdps.net>
Date: Fri, 18 Nov 2016 19:25:50 +0100
Subject: [PATCH 2/2] sun20i: added config for Sinovoip Bananapi M1 plus

According to linux-sunxi.org, the m1 plus is very similar to Lemaker's
Banana Pro, so the config is the very same for this board.

Signed-off-by: Richard Kojedzinszky <krichy at nmdps.net>
Tested-by: Richard Kojedzinszky <krichy at nmdps.net>
---
  configs/Sinovoip_BPI_M1_plus_defconfig | 26 ++++++++++++++++++++++++++
  1 file changed, 26 insertions(+)
  create mode 100644 configs/Sinovoip_BPI_M1_plus_defconfig

diff --git a/configs/Sinovoip_BPI_M1_plus_defconfig 
b/configs/Sinovoip_BPI_M1_plus_defconfig
new file mode 100644
index 0000000000..9833ef3923
--- /dev/null
+++ b/configs/Sinovoip_BPI_M1_plus_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN7I=y
+CONFIG_DRAM_CLK=432
+CONFIG_MACPWR="PH23"
+CONFIG_USB1_VBUS_PIN="PH0"
+CONFIG_USB2_VBUS_PIN="PH1"
+CONFIG_VIDEO_COMPOSITE=y
+CONFIG_GMAC_TX_DELAY=3
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1-plus"
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_NETCONSOLE=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_SUN7I_GMAC=y
+CONFIG_AXP_ALDO4_VOLT=2500
+CONFIG_USB_EHCI_HCD=y
-- 
2.11.0