[U-Boot] [PATCH v2 33/56] rockchip: pinctrl: rk3368: add SPI support

[Philipp Tomsich]

To implement pinctrl support for the RK3368, we need to add the
bit-definitions to configure the IOMUX and tie these into the
pinctrl framework. This also adds the mapping from the IRQ# back
onto the periheral id for the SPI devices.

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---

Changes in v2: None

 drivers/pinctrl/rockchip/pinctrl_rk3368.c | 90 +++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3368.c b/drivers/pinctrl/rockchip/pinctrl_rk3368.c
index 67695ab..7a3b7c16 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3368.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3368.c
@@ -1,8 +1,11 @@
 /*
  * (C) Copyright 2017 Rockchip Electronics Co., Ltd
  * Author: Andy Yan <andy.yan at rock-chips.com>
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
  * SPDX-License-Identifier:	GPL-2.0+
  */
+
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
@@ -16,6 +19,25 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* PMUGRF_GPIO0B_IOMUX */
+enum {
+	GPIO0B5_MASK            = GENMASK(11, 10),
+	GPIO0B5_GPIO            = 0,
+	GPIO0B5_SPI2_CSN0       = (2 << 10),
+
+	GPIO0B4_MASK            = GENMASK(9, 8),
+	GPIO0B4_GPIO            = 0,
+	GPIO0B4_SPI2_CLK        = (2 << 8),
+
+	GPIO0B3_MASK            = GENMASK(7, 6),
+	GPIO0B3_GPIO            = 0,
+	GPIO0B3_SPI2_TXD        = (2 << 6),
+
+	GPIO0B2_MASK            = GENMASK(5, 4),
+	GPIO0B2_GPIO            = 0,
+	GPIO0B2_SPI2_RXD        = (2 << 4),
+};
+
 /*GRF_GPIO0C_IOMUX*/
 enum {
 	GPIO0C7_MASK	       = GENMASK(15, 14),
@@ -209,10 +231,12 @@ enum {
 	GPIO1C7_MASK            = GENMASK(15, 14),
 	GPIO1C7_GPIO            = 0,
 	GPIO1C7_EMMC_DATA5      = (2 << 14),
+	GPIO1C7_SPI0_TXD        = (3 << 14),
 
 	GPIO1C6_MASK            = GENMASK(13, 12),
 	GPIO1C6_GPIO            = 0,
 	GPIO1C6_EMMC_DATA4      = (2 << 12),
+	GPIO1C6_SPI0_RXD        = (3 << 12),
 
 	GPIO1C5_MASK            = GENMASK(11, 10),
 	GPIO1C5_GPIO            = 0,
@@ -241,6 +265,10 @@ enum {
 
 /* GRF_GPIO1D_IOMUX*/
 enum {
+	GPIO1D5_MASK            = GENMASK(11, 10),
+	GPIO1D5_GPIO            = 0,
+	GPIO1D5_SPI0_CLK        = (2 << 10),
+
 	GPIO1D3_MASK            = GENMASK(7, 6),
 	GPIO1D3_GPIO            = 0,
 	GPIO1D3_EMMC_PWREN      = (2 << 6),
@@ -252,10 +280,12 @@ enum {
 	GPIO1D1_MASK            = GENMASK(3, 2),
 	GPIO1D1_GPIO            = 0,
 	GPIO1D1_EMMC_DATA7      = (2 << 2),
+	GPIO1D1_SPI0_CSN1       = (3 << 2),
 
 	GPIO1D0_MASK            = GENMASK(1, 0),
 	GPIO1D0_GPIO            = 0,
 	GPIO1D0_EMMC_DATA6      = (2 << 0),
+	GPIO1D0_SPI0_CSN0       = (3 << 0),
 };
 
 
@@ -331,6 +361,7 @@ enum {
 	GPIO3D4_MASK            = GENMASK(9, 8),
 	GPIO3D4_GPIO            = 0,
 	GPIO3D4_MAC_TXCLK       = (1 << 8),
+	GPIO3D4_SPI1_CNS1       = (2 << 8),
 
 	GPIO3D1_MASK            = GENMASK(3, 2),
 	GPIO3D1_GPIO            = 0,
@@ -377,6 +408,54 @@ static void pinctrl_rk3368_uart_config(struct rk3368_pinctrl_priv *priv,
 	}
 }
 
+static void pinctrl_rk3368_spi_config(struct rk3368_pinctrl_priv *priv,
+				      int spi_id)
+{
+	struct rk3368_grf *grf = priv->grf;
+	struct rk3368_pmu_grf *pmugrf = priv->pmugrf;
+
+	switch (spi_id) {
+	case PERIPH_ID_SPI0:
+		/*
+		 * eMMC can only be connected with 4 bits, when SPI0 is used.
+		 * This is all-or-nothing, so we assume that if someone asks us
+		 * to configure SPI0, that their eMMC interface is unused or
+		 * configured appropriately.
+		 */
+		rk_clrsetreg(&grf->gpio1d_iomux,
+			     GPIO1D0_MASK | GPIO1D1_MASK |
+			     GPIO1D5_MASK,
+			     GPIO1D0_SPI0_CSN0 | GPIO1D1_SPI0_CSN1 |
+			     GPIO1D5_SPI0_CLK);
+		rk_clrsetreg(&grf->gpio1c_iomux,
+			     GPIO1C6_MASK | GPIO1C7_MASK,
+			     GPIO1C6_SPI0_RXD | GPIO1C7_SPI0_TXD);
+		break;
+	case PERIPH_ID_SPI1:
+		/*
+		 * We don't implement support for configuring SPI1_CSN#1, as it
+		 * will conflicts with the GMAC (MAC TX clk-out).
+		 */
+		rk_clrsetreg(&grf->gpio1b_iomux,
+			     GPIO1B6_MASK | GPIO1B7_MASK,
+			     GPIO1B6_SPI1_CLK | GPIO1B7_SPI1_CSN0);
+		rk_clrsetreg(&grf->gpio1c_iomux,
+			     GPIO1C0_MASK | GPIO1C1_MASK,
+			     GPIO1C0_SPI1_TXD | GPIO1C1_SPI1_RXD);
+		break;
+	case PERIPH_ID_SPI2:
+		rk_clrsetreg(&pmugrf->gpio0b_iomux,
+			     GPIO0B2_MASK | GPIO0B3_MASK |
+			     GPIO0B4_MASK | GPIO0B5_MASK,
+			     GPIO0B2_SPI2_RXD | GPIO0B3_SPI2_TXD |
+			     GPIO0B4_SPI2_CLK | GPIO0B5_SPI2_CSN0);
+		break;
+	default:
+		debug("%s: spi id = %d iomux error!\n", __func__, spi_id);
+		break;
+	}
+}
+
 #if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
 static void pinctrl_rk3368_gmac_config(struct rk3368_grf *grf, int gmac_id)
 {
@@ -457,6 +536,11 @@ static int rk3368_pinctrl_request(struct udevice *dev, int func, int flags)
 	case PERIPH_ID_UART4:
 		pinctrl_rk3368_uart_config(priv, func);
 		break;
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+	case PERIPH_ID_SPI2:
+		pinctrl_rk3368_spi_config(priv, func);
+		break;
 	case PERIPH_ID_EMMC:
 	case PERIPH_ID_SDCARD:
 		pinctrl_rk3368_sdmmc_config(priv->grf, func);
@@ -495,6 +579,12 @@ static int rk3368_pinctrl_get_periph_id(struct udevice *dev,
 		return PERIPH_ID_UART1;
 	case 55:
 		return PERIPH_ID_UART0;
+	case 44:
+		return PERIPH_ID_SPI0;
+	case 45:
+		return PERIPH_ID_SPI1;
+	case 41:
+		return PERIPH_ID_SPI2;
 	case 35:
 		return PERIPH_ID_EMMC;
 	case 32:
-- 
2.1.4