[U-Boot] [PATCH v3 06/66] spl: adapts SYS_MALLOC_F_LEN for TPL

[Philipp Tomsich]

The (upstream) changes to break up SYS_MALLOC_F_LEN for the full
U-Boot and the SPL stage, break TPL (if simple malloc is enabled in
TPL).

This adds support for a TPL-variant of SYS_MALLOC_F_LEN:
- adds TPL_SYS_MALLOC_F_LEN
- rewrites a test for CONFIG_SPL_SYS_MALLOC_F_LEN to access
  CONFIG_VAL(SYS_MALLOC_F_LEN)

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>

Version-changes: 3
- (new patch) adds changes to SYS_MALLOC_F_LEN for TPL to fix breakage
  from rebasing to u-boot-rockchip/master

---

Changes in v3: None
Changes in v2: None

 Kconfig          | 12 +++++++++++-
 common/spl/spl.c |  2 +-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/Kconfig b/Kconfig
index c1451bc..27c64fe 100644
--- a/Kconfig
+++ b/Kconfig
@@ -96,7 +96,17 @@ config SYS_MALLOC_F_LEN
 	  initial serial device and any others that are needed.
 
 config SPL_SYS_MALLOC_F_LEN
-        hex "Size of malloc() pool in spl before relocation"
+        hex "Size of malloc() pool in SPL before relocation"
+        depends on SYS_MALLOC_F
+        default SYS_MALLOC_F_LEN
+        help
+          Before relocation, memory is very limited on many platforms. Still,
+          we can provide a small malloc() pool if needed. Driver model in
+          particular needs this to operate, so that it can allocate the
+          initial serial device and any others that are needed.
+
+config TPL_SYS_MALLOC_F_LEN
+        hex "Size of malloc() pool in TPL before relocation"
         depends on SYS_MALLOC_F
         default SYS_MALLOC_F_LEN
         help
diff --git a/common/spl/spl.c b/common/spl/spl.c
index b61993f..c84ffd8 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -487,7 +487,7 @@ ulong spl_relocate_stack_gd(void)
 	gd_t *new_gd;
 	ulong ptr = CONFIG_SPL_STACK_R_ADDR;
 
-#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_SPL_SYS_MALLOC_F_LEN
+#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_VAL(SYS_MALLOC_F_LEN)
 	if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) {
 		ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN;
 		gd->malloc_base = ptr;
-- 
2.1.4