[U-Boot] [PATCH v2 14/15] dm: sata: sunxi: Add support for driver model
Simon Glass
sjg at chromium.org
Tue Jul 4 19:31:31 UTC 2017
Adjust SATA setup to support driver model.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
board/sunxi/ahci.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 58 insertions(+), 3 deletions(-)
diff --git a/board/sunxi/ahci.c b/board/sunxi/ahci.c
index 522e54ab16..a79b80ca1e 100644
--- a/board/sunxi/ahci.c
+++ b/board/sunxi/ahci.c
@@ -1,5 +1,6 @@
#include <common.h>
#include <ahci.h>
+#include <dm.h>
#include <scsi.h>
#include <errno.h>
#include <asm/io.h>
@@ -13,9 +14,8 @@
/* This magic PHY initialisation was taken from the Allwinner releases
* and Linux driver, but is completely undocumented.
*/
-static int sunxi_ahci_phy_init(u32 base)
+static int sunxi_ahci_phy_init(u8 *reg_base)
{
- u8 *reg_base = (u8 *)base;
u32 reg_val;
int timeout;
@@ -70,10 +70,65 @@ static int sunxi_ahci_phy_init(u32 base)
return 0;
}
+#ifndef CONFIG_DM_SCSI
void scsi_init(void)
{
- if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0)
+ if (sunxi_ahci_phy_init((u8 *)SUNXI_SATA_BASE) < 0)
return;
ahci_init((void __iomem *)SUNXI_SATA_BASE);
}
+#else
+static int sunxi_sata_probe(struct udevice *dev)
+{
+ ulong base;
+ u8 *reg;
+ int ret;
+
+ base = dev_read_addr(dev);
+ if (base == FDT_ADDR_T_NONE) {
+ debug("%s: Failed to find address (err=%d\n)", __func__, ret);
+ return -EINVAL;
+ }
+ reg = (u8 *)base;
+ ret = sunxi_ahci_phy_init(reg);
+ if (ret) {
+ debug("%s: Failed to init phy (err=%d\n)", __func__, ret);
+ return ret;
+ }
+ ret = ahci_probe_scsi(dev, base);
+ if (ret) {
+ debug("%s: Failed to probe (err=%d\n)", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sunxi_sata_bind(struct udevice *dev)
+{
+ struct udevice *scsi_dev;
+ int ret;
+
+ ret = ahci_bind_scsi(dev, &scsi_dev);
+ if (ret) {
+ debug("%s: Failed to bind (err=%d\n)", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id sunxi_ahci_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-ahci" },
+ { }
+};
+
+U_BOOT_DRIVER(ahci_sunxi_drv) = {
+ .name = "ahci_sunxi",
+ .id = UCLASS_AHCI,
+ .of_match = sunxi_ahci_ids,
+ .bind = sunxi_sata_bind,
+ .probe = sunxi_sata_probe,
+};
+#endif
--
2.13.2.725.g09c95d1e9-goog
More information about the U-Boot
mailing list