[U-Boot] [PATCH 23/51] gdsys: mpc8308: Use shadow register for output GPIO values

Mario Six mario.six at gdsys.cc
Fri Jul 14 12:55:09 UTC 2017


Since gpio output status on MPC8xxx cannot be read back, it has to be
buffered locally.

Signed-off-by: Dirk Eibach <dirk.eibach at gdsys.cc>
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---

 board/gdsys/mpc8308/hrcon.c   |  4 ++--
 board/gdsys/mpc8308/mpc8308.c | 19 +++++++++++++++++++
 board/gdsys/mpc8308/mpc8308.h |  3 +++
 board/gdsys/mpc8308/strider.c |  2 +-
 4 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c
index e8898a793a..bbe93a3488 100644
--- a/board/gdsys/mpc8308/hrcon.c
+++ b/board/gdsys/mpc8308/hrcon.c
@@ -290,8 +290,8 @@ void mpc8308_setup_hw(void)
 	/*
 	 * set "startup-finished"-gpios
 	 */
-	setbits_be32(&immr->gpio[0].dir, (BIT(31 - 11) | BIT(31 - 12)));
-	setbits_be32(&immr->gpio[0].dat, BIT(31 - 12));
+	setbits_be32(&immr->gpio[0].dir, BIT(31 - 11) | BIT(31 - 12));
+	setbits_gpio0_out(BIT(31 - 12));
 }
 
 int mpc8308_get_fpga_done(uint fpga)
diff --git a/board/gdsys/mpc8308/mpc8308.c b/board/gdsys/mpc8308/mpc8308.c
index 0b1d4eab22..8d6a49f86a 100644
--- a/board/gdsys/mpc8308/mpc8308.c
+++ b/board/gdsys/mpc8308/mpc8308.c
@@ -25,6 +25,25 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* as gpio output status cannot be read back, we have to buffer it locally */
+u32 gpio0_out;
+
+void setbits_gpio0_out(u32 mask)
+{
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+	gpio0_out |= mask;
+	out_be32(&immr->gpio[0].dat, gpio0_out);
+}
+
+void clrbits_gpio0_out(u32 mask)
+{
+	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+	gpio0_out &= ~mask;
+	out_be32(&immr->gpio[0].dat, gpio0_out);
+}
+
 int get_fpga_state(uint dev)
 {
 	return gd->arch.fpga_state[dev];
diff --git a/board/gdsys/mpc8308/mpc8308.h b/board/gdsys/mpc8308/mpc8308.h
index dc07d564eb..1e4f24fb2a 100644
--- a/board/gdsys/mpc8308/mpc8308.h
+++ b/board/gdsys/mpc8308/mpc8308.h
@@ -1,6 +1,9 @@
 #ifndef __MPC8308_H_
 #define __MPC8308_H_
 
+void setbits_gpio0_out(u32 mask);
+void clrbits_gpio0_out(u32 mask);
+
 /* functions to be provided by board implementation */
 void mpc8308_init(void);
 void mpc8308_set_fpga_reset(unsigned state);
diff --git a/board/gdsys/mpc8308/strider.c b/board/gdsys/mpc8308/strider.c
index 5197d22f07..ac785da8e6 100644
--- a/board/gdsys/mpc8308/strider.c
+++ b/board/gdsys/mpc8308/strider.c
@@ -346,7 +346,7 @@ void mpc8308_setup_hw(void)
 	 * set "startup-finished"-gpios
 	 */
 	setbits_be32(&immr->gpio[0].dir, BIT(31 - 11) | BIT(31 - 12));
-	setbits_be32(&immr->gpio[0].dat, BIT(31 - 12));
+	setbits_gpio0_out(BIT(31 - 12));
 }
 
 int mpc8308_get_fpga_done(uint fpga)
-- 
2.11.0



More information about the U-Boot mailing list