[U-Boot] [PATCH 3/4] power: pwm_regulator: remove redundance code

[Kever Yang]

The regulator_enable() should be called from upper layer like
regulators_enable_boot_on(), remove it from pwm regulator driver.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 drivers/power/regulator/pwm_regulator.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/power/regulator/pwm_regulator.c b/drivers/power/regulator/pwm_regulator.c
index fcf5e00..b63f941 100644
--- a/drivers/power/regulator/pwm_regulator.c
+++ b/drivers/power/regulator/pwm_regulator.c
@@ -86,12 +86,8 @@ static int pwm_regulator_set_voltage(struct udevice *dev, int uvolt)
 		return ret;
 	}
 
-	ret = pwm_set_enable(priv->pwm, priv->pwm_id, true);
-	if (ret) {
-		dev_err(dev, "Failed to enable PWM\n");
-		return ret;
-	}
 	priv->volt_uV = uvolt;
+
 	return ret;
 }
 
@@ -144,8 +140,6 @@ static int pwm_regulator_probe(struct udevice *dev)
 	if (priv->init_voltage)
 		pwm_regulator_set_voltage(dev, priv->init_voltage);
 
-	pwm_regulator_enable(dev, 1);
-
 	return 0;
 }
 
-- 
1.9.1