[U-Boot] [PATCH 42/51] cmd: Add ihs fpga command
Mario Six
mario.six at gdsys.cc
Fri Jul 14 12:55:28 UTC 2017
Add a comman to debug the IHS FPGA's bus.
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
cmd/Kconfig | 5 ++
cmd/Makefile | 1 +
cmd/ihs_fpga.c | 269 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 275 insertions(+)
create mode 100644 cmd/ihs_fpga.c
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 4bbe9d435c..6d13c681cb 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -753,6 +753,11 @@ config CMD_SATA
Attachment, where AT refers to an IBM AT (Advanced Technology)
computer released in 1984.
+config CMD_IHS_FPGA
+ bool "fpga"
+ help
+ Enable the GDSYS IHS FPGA command for accessing the FPGA's regisers.
+
config CMD_IHS_AXI
bool "axi"
help
diff --git a/cmd/Makefile b/cmd/Makefile
index 0baaf76b47..79abe8f877 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_CMD_GPT) += gpt.o
obj-$(CONFIG_CMD_ETHSW) += ethsw.o
obj-$(CONFIG_CMD_IHS_AXI) += ihs_axi.o
+obj-$(CONFIG_CMD_IHS_FPGA) += ihs_fpga.o
# Power
obj-$(CONFIG_CMD_PMIC) += pmic.o
diff --git a/cmd/ihs_fpga.c b/cmd/ihs_fpga.c
new file mode 100644
index 0000000000..6d0c599d96
--- /dev/null
+++ b/cmd/ihs_fpga.c
@@ -0,0 +1,269 @@
+/*
+ * (C) Copyright 2017
+ * Mario Six, Guntermann & Drunck GmbH, mario.six at gdsys.cc
+ *
+ * based on the fpgad command, which is
+ *
+ * (C) Copyright 2013
+ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach at gdsys.cc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <command.h>
+#include <console.h>
+#include <ihs_fpga.h>
+
+static struct udevice *fpga_cur;
+static uint dp_last_addr;
+static uint dp_last_length = 0x40;
+
+static void show_fpga(struct udevice *fpga)
+{
+ struct udevice *dev;
+
+ printf("Bus %d:\t%s", fpga->req_seq, fpga->name);
+ if (device_active(fpga))
+ printf(" (active %d)", fpga->seq);
+ printf("\n");
+ for (device_find_first_child(fpga, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ //struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
+
+ //printf(" %02x: %s, offset len %x, flags %x\n",
+ //chip->chip_addr, dev->name, chip->offset_len,
+ //chip->flags);
+ printf(" %s\n", dev->name);
+ }
+}
+
+static int do_fpga_show_fpga(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc == 1) {
+ /* show all FPGAs */
+ struct udevice *fpga;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(UCLASS_IHS_FPGA, &uc);
+ if (ret)
+ return CMD_RET_FAILURE;
+ uclass_foreach_dev(fpga, uc)
+ show_fpga(fpga);
+ } else {
+ int i;
+
+ /* show specific fpga */
+ i = simple_strtoul(argv[1], NULL, 10);
+
+ struct udevice *fpga;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_IHS_FPGA, i, &fpga);
+ if (ret) {
+ printf("Invalid fpga %d: err=%d\n", i, ret);
+ return CMD_RET_FAILURE;
+ }
+ show_fpga(fpga);
+ }
+
+ return 0;
+}
+
+static int cmd_fpga_set_fpga_num(unsigned int fpganum)
+{
+ struct udevice *fpga;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_IHS_FPGA, fpganum, &fpga);
+ if (ret) {
+ debug("%s: No fpga %d\n", __func__, fpganum);
+ return ret;
+ }
+ fpga_cur = fpga;
+
+ return 0;
+}
+
+static int fpga_get_cur_fpga(struct udevice **fpgap)
+{
+ if (!fpga_cur) {
+ puts("No fpga selected\n");
+ return -ENODEV;
+ }
+ *fpgap = fpga_cur;
+
+ return 0;
+}
+
+static int do_fpga_fpga_num(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret = 0;
+ int fpga_no;
+
+ if (argc == 1) {
+ /* querying current setting */
+ struct udevice *fpga;
+
+ if (!fpga_get_cur_fpga(&fpga))
+ fpga_no = fpga->seq;
+ else
+ fpga_no = -1;
+ printf("Current fpga is %d\n", fpga_no);
+ } else {
+ fpga_no = simple_strtoul(argv[1], NULL, 10);
+ printf("Setting fpga to %d\n", fpga_no);
+
+ ret = cmd_fpga_set_fpga_num(fpga_no);
+
+ if (ret)
+ printf("Failure changing fpga number (%d)\n", ret);
+ }
+
+ return ret ? CMD_RET_FAILURE : 0;
+}
+
+#define DISP_LINE_LEN 16
+
+int do_fpga_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ unsigned int k;
+ ulong addr, length;
+ int rc = 0;
+ u16 linebuf[DISP_LINE_LEN / sizeof(u16)];
+ ulong nbytes;
+
+ /*
+ * We use the last specified parameters, unless new ones are
+ * entered.
+ */
+ addr = dp_last_addr;
+ length = dp_last_length;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ if (!fpga_cur) {
+ puts("No fpga selected\n");
+ return -ENODEV;
+ }
+
+ if ((flag & CMD_FLAG_REPEAT) == 0) {
+ /*
+ * Address is specified since argc > 3
+ */
+ addr = simple_strtoul(argv[1], NULL, 16);
+
+ /*
+ * If another parameter, it is the length to display.
+ * Length is the number of objects, not number of bytes.
+ */
+ if (argc > 2)
+ length = simple_strtoul(argv[2], NULL, 16);
+ }
+
+ nbytes = length * sizeof(u16);
+ do {
+ ulong linebytes = (nbytes > DISP_LINE_LEN) ?
+ DISP_LINE_LEN : nbytes;
+
+ for (k = 0; k < linebytes / sizeof(u16); ++k)
+ linebuf[k] = fpga_in_le16(fpga_cur,
+ addr / sizeof(u16) + k);
+
+ print_buffer(addr, (void *)linebuf, sizeof(u16),
+ linebytes / sizeof(u16),
+ DISP_LINE_LEN / sizeof(u16));
+ if (rc)
+ break;
+
+ nbytes -= linebytes;
+ addr += linebytes;
+ if (ctrlc()) {
+ rc = 1;
+ break;
+ }
+ } while (nbytes > 0);
+
+ dp_last_addr = addr;
+ dp_last_length = length;
+
+ return rc;
+}
+
+static int do_fpga_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ u16 writeval;
+ ulong addr, count;
+
+ if ((argc < 3) || (argc > 4))
+ return CMD_RET_USAGE;
+
+ if (!fpga_cur) {
+ puts("No fpga selected\n");
+ return -ENODEV;
+ }
+
+ /* Address is specified since argc > 3 */
+ addr = simple_strtoul(argv[1], NULL, 16);
+
+ /* Get the value to write. */
+ writeval = simple_strtoul(argv[2], NULL, 16);
+
+ /* Count ? */
+ if (argc == 4)
+ count = simple_strtoul(argv[3], NULL, 16);
+ else
+ count = 1;
+
+ while (count-- > 0)
+ fpga_out_le16(fpga_cur,
+ addr / sizeof(u16) + count,
+ writeval);
+
+ return 0;
+}
+
+static cmd_tbl_t cmd_fpga_sub[] = {
+ U_BOOT_CMD_MKENT(show, 1, 1, do_fpga_show_fpga, "", ""),
+ U_BOOT_CMD_MKENT(dev, 1, 1, do_fpga_fpga_num, "", ""),
+ U_BOOT_CMD_MKENT(md, 3, 1, do_fpga_md, "", ""),
+ U_BOOT_CMD_MKENT(mw, 4, 1, do_fpga_mw, "", ""),
+};
+
+static int do_ihs_fpga(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ cmd_tbl_t *c;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ /* Strip off leading 'fpga' command argument */
+ argc--;
+ argv++;
+
+ c = find_cmd_tbl(argv[0], &cmd_fpga_sub[0], ARRAY_SIZE(cmd_fpga_sub));
+
+ if (c)
+ return c->cmd(cmdtp, flag, argc, argv);
+ else
+ return CMD_RET_USAGE;
+}
+
+static char fpga_help_text[] =
+ "show - show FPGA info\n"
+ "fpga dev [dev] - show or set current FPGA\n"
+ "fpga md address [# of objects] - read from FPGA device\n"
+ "fpga mw address value [count] - write to FPGA device (fill)\n";
+
+U_BOOT_CMD(
+ fpga, 7, 1, do_ihs_fpga,
+ "FPGA sub-system",
+ fpga_help_text
+);
--
2.11.0
More information about the U-Boot
mailing list