[U-Boot] [PATCH v3 02/24] Move environment files from common/ to env/
Simon Glass
sjg at chromium.org
Wed Jul 26 17:19:26 UTC 2017
About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.
Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
Changes in v3: None
Changes in v2: None
Kconfig | 2 +
Makefile | 1 +
arch/sh/cpu/u-boot.lds | 4 +-
board/freescale/mx31ads/u-boot.lds | 2 +-
common/Kconfig | 429 ------------------------------
common/Makefile | 49 +---
env/Kconfig | 428 +++++++++++++++++++++++++++++
env/Makefile | 57 ++++
common/env_attr.c => env/attr.c | 0
common/env_callback.c => env/callback.c | 0
common/env_common.c => env/common.c | 0
common/env_dataflash.c => env/dataflash.c | 0
common/env_eeprom.c => env/eeprom.c | 0
common/env_embedded.c => env/embedded.c | 0
common/env_ext4.c => env/ext4.c | 0
common/env_fat.c => env/fat.c | 0
common/env_flags.c => env/flags.c | 0
common/env_flash.c => env/flash.c | 0
common/env_mmc.c => env/mmc.c | 0
common/env_nand.c => env/nand.c | 0
common/env_nowhere.c => env/nowhere.c | 0
common/env_nvram.c => env/nvram.c | 0
common/env_onenand.c => env/onenand.c | 0
common/env_remote.c => env/remote.c | 0
common/env_sata.c => env/sata.c | 0
common/env_sf.c => env/sf.c | 0
common/env_ubi.c => env/ubi.c | 0
include/configs/M5208EVBE.h | 4 +-
include/configs/M5235EVB.h | 2 +-
include/configs/M5249EVB.h | 4 +-
include/configs/M5253DEMO.h | 4 +-
include/configs/M5253EVBE.h | 2 +-
include/configs/M5272C3.h | 4 +-
include/configs/M5275EVB.h | 4 +-
include/configs/M5282EVB.h | 2 +-
include/configs/M53017EVB.h | 2 +-
include/configs/M5329EVB.h | 4 +-
include/configs/M5373EVB.h | 4 +-
include/configs/amcore.h | 4 +-
include/configs/astro_mcf5373l.h | 2 +-
include/configs/cobra5272.h | 4 +-
scripts/Makefile.spl | 4 +-
tools/Makefile | 4 +-
43 files changed, 519 insertions(+), 507 deletions(-)
create mode 100644 env/Kconfig
create mode 100644 env/Makefile
rename common/env_attr.c => env/attr.c (100%)
rename common/env_callback.c => env/callback.c (100%)
rename common/env_common.c => env/common.c (100%)
rename common/env_dataflash.c => env/dataflash.c (100%)
rename common/env_eeprom.c => env/eeprom.c (100%)
rename common/env_embedded.c => env/embedded.c (100%)
rename common/env_ext4.c => env/ext4.c (100%)
rename common/env_fat.c => env/fat.c (100%)
rename common/env_flags.c => env/flags.c (100%)
rename common/env_flash.c => env/flash.c (100%)
rename common/env_mmc.c => env/mmc.c (100%)
rename common/env_nand.c => env/nand.c (100%)
rename common/env_nowhere.c => env/nowhere.c (100%)
rename common/env_nvram.c => env/nvram.c (100%)
rename common/env_onenand.c => env/onenand.c (100%)
rename common/env_remote.c => env/remote.c (100%)
rename common/env_sata.c => env/sata.c (100%)
rename common/env_sf.c => env/sf.c (100%)
rename common/env_ubi.c => env/ubi.c (100%)
diff --git a/Kconfig b/Kconfig
index bb80adacf4..f48912b7df 100644
--- a/Kconfig
+++ b/Kconfig
@@ -358,6 +358,8 @@ source "disk/Kconfig"
source "dts/Kconfig"
+source "env/Kconfig"
+
source "net/Kconfig"
source "drivers/Kconfig"
diff --git a/Makefile b/Makefile
index 76bfc5b1ec..b2b214a199 100644
--- a/Makefile
+++ b/Makefile
@@ -690,6 +690,7 @@ libs-y += drivers/usb/phy/
libs-y += drivers/usb/ulpi/
libs-y += cmd/
libs-y += common/
+libs-y += env/
libs-$(CONFIG_API) += api/
libs-$(CONFIG_HAS_POST) += post/
libs-y += test/
diff --git a/arch/sh/cpu/u-boot.lds b/arch/sh/cpu/u-boot.lds
index bbf9ff485f..7fc91bc4aa 100644
--- a/arch/sh/cpu/u-boot.lds
+++ b/arch/sh/cpu/u-boot.lds
@@ -33,9 +33,9 @@ SECTIONS
KEEP(CONFIG_BOARDDIR/lowlevel_init.o (.text .spiboot1.text))
KEEP(*(.spiboot2.text))
. = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
+ env/embedded.o (.ppcenv)
. = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
+ env/embedded.o (.ppcenvr)
. = ALIGN(8192);
*(.text)
. = ALIGN(4);
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 8a4a8a2f07..71a63f188e 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -30,7 +30,7 @@ SECTIONS
drivers/mtd/built-in.o (.text*)
. = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o(.text*)
+ env/embedded.o(.text*)
*(.text*)
}
diff --git a/common/Kconfig b/common/Kconfig
index 8c8d2e4832..5f439bd110 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -174,435 +174,6 @@ config SPI_BOOT
endmenu
-menu "Environment"
-
-config ENV_IS_IN_DATAFLASH
- bool "Environment in dataflash"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have a DataFlash memory device which you
- want to use for the environment.
-
- - CONFIG_ENV_OFFSET:
- - CONFIG_ENV_ADDR:
- - CONFIG_ENV_SIZE:
-
- These three #defines specify the offset and size of the
- environment area within the total memory of your DataFlash placed
- at the specified address.
-
-config ENV_IS_IN_EEPROM
- bool "Environment in EEPROM"
- depends on !CHAIN_OF_TRUST
- help
- Use this if you have an EEPROM or similar serial access
- device and a driver for it.
-
- - CONFIG_ENV_OFFSET:
- - CONFIG_ENV_SIZE:
-
- These two #defines specify the offset and size of the
- environment area within the total memory of your EEPROM.
-
- - CONFIG_SYS_I2C_EEPROM_ADDR:
- If defined, specified the chip address of the EEPROM device.
- The default address is zero.
-
- - CONFIG_SYS_I2C_EEPROM_BUS:
- If defined, specified the i2c bus of the EEPROM device.
-
- - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
- If defined, the number of bits used to address bytes in a
- single page in the EEPROM device. A 64 byte page, for example
- would require six bits.
-
- - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
- If defined, the number of milliseconds to delay between
- page writes. The default is zero milliseconds.
-
- - CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
- The length in bytes of the EEPROM memory array address. Note
- that this is NOT the chip address length!
-
- - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
- EEPROM chips that implement "address overflow" are ones
- like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- address and the extra bits end up in the "chip address" bit
- slots. This makes a 24WC08 (1Kbyte) chip look like four 256
- byte chips.
-
- Note that we consider the length of the address field to
- still be one byte because the extra address bits are hidden
- in the chip address.
-
- - CONFIG_SYS_EEPROM_SIZE:
- The size in bytes of the EEPROM device.
-
- - CONFIG_ENV_EEPROM_IS_ON_I2C
- define this, if you have I2C and SPI activated, and your
- EEPROM, which holds the environment, is on the I2C bus.
-
- - CONFIG_I2C_ENV_EEPROM_BUS
- if you have an Environment on an EEPROM reached over
- I2C muxes, you can define here, how to reach this
- EEPROM. For example:
-
- #define CONFIG_I2C_ENV_EEPROM_BUS 1
-
- EEPROM which holds the environment, is reached over
- a pca9547 i2c mux with address 0x70, channel 3.
-
-config ENV_IS_IN_FAT
- bool "Environment is in a FAT filesystem"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you want to use the FAT file system for the environment.
-
- - FAT_ENV_INTERFACE:
-
- Define this to a string that is the name of the block device.
-
- - FAT_ENV_DEVICE_AND_PART:
-
- Define this to a string to specify the partition of the device. It can
- be as following:
-
- "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
- - "D:P": device D partition P. Error occurs if device D has no
- partition table.
- - "D:0": device D.
- - "D" or "D:": device D partition 1 if device D has partition
- table, or the whole device D if has no partition
- table.
- - "D:auto": first partition in device D with bootable flag set.
- If none, first valid partition in device D. If no
- partition table then means device D.
-
- - FAT_ENV_FILE:
-
- It's a string of the FAT file name. This file use to store the
- environment.
-
- - CONFIG_FAT_WRITE:
- This must be enabled. Otherwise it cannot save the environment file.
-
-config ENV_IS_IN_FLASH
- bool "Environment in flash memory"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have a flash device which you want to use for the
- environment.
-
- a) The environment occupies one whole flash sector, which is
- "embedded" in the text segment with the U-Boot code. This
- happens usually with "bottom boot sector" or "top boot
- sector" type flash chips, which have several smaller
- sectors at the start or the end. For instance, such a
- layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
- such a case you would place the environment in one of the
- 4 kB sectors - with U-Boot code before and after it. With
- "top boot sector" type flash chips, you would put the
- environment in one of the last sectors, leaving a gap
- between U-Boot and the environment.
-
- CONFIG_ENV_OFFSET:
-
- Offset of environment data (variable area) to the
- beginning of flash memory; for instance, with bottom boot
- type flash chips the second sector can be used: the offset
- for this sector is given here.
-
- CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
-
- CONFIG_ENV_ADDR:
-
- This is just another way to specify the start address of
- the flash sector containing the environment (instead of
- CONFIG_ENV_OFFSET).
-
- CONFIG_ENV_SECT_SIZE:
-
- Size of the sector containing the environment.
-
-
- b) Sometimes flash chips have few, equal sized, BIG sectors.
- In such a case you don't want to spend a whole sector for
- the environment.
-
- CONFIG_ENV_SIZE:
-
- If you use this in combination with CONFIG_ENV_IS_IN_FLASH
- and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
- of this flash sector for the environment. This saves
- memory for the RAM copy of the environment.
-
- It may also save flash memory if you decide to use this
- when your environment is "embedded" within U-Boot code,
- since then the remainder of the flash sector could be used
- for U-Boot code. It should be pointed out that this is
- STRONGLY DISCOURAGED from a robustness point of view:
- updating the environment in flash makes it always
- necessary to erase the WHOLE sector. If something goes
- wrong before the contents has been restored from a copy in
- RAM, your target system will be dead.
-
- CONFIG_ENV_ADDR_REDUND
- CONFIG_ENV_SIZE_REDUND
-
- These settings describe a second storage area used to hold
- a redundant copy of the environment data, so that there is
- a valid backup copy in case there is a power failure during
- a "saveenv" operation.
-
- BE CAREFUL! Any changes to the flash layout, and some changes to the
- source code will make it necessary to adapt <board>/u-boot.lds*
- accordingly!
-
-config ENV_IS_IN_MMC
- bool "Environment in an MMC device"
- depends on !CHAIN_OF_TRUST
- default y if ARCH_SUNXI
- help
- Define this if you have an MMC device which you want to use for the
- environment.
-
- CONFIG_SYS_MMC_ENV_DEV:
-
- Specifies which MMC device the environment is stored in.
-
- CONFIG_SYS_MMC_ENV_PART (optional):
-
- Specifies which MMC partition the environment is stored in. If not
- set, defaults to partition 0, the user area. Common values might be
- 1 (first MMC boot partition), 2 (second MMC boot partition).
-
- CONFIG_ENV_OFFSET:
- CONFIG_ENV_SIZE:
-
- These two #defines specify the offset and size of the environment
- area within the specified MMC device.
-
- If offset is positive (the usual case), it is treated as relative to
- the start of the MMC partition. If offset is negative, it is treated
- as relative to the end of the MMC partition. This can be useful if
- your board may be fitted with different MMC devices, which have
- different sizes for the MMC partitions, and you always want the
- environment placed at the very end of the partition, to leave the
- maximum possible space before it, to store other data.
-
- These two values are in units of bytes, but must be aligned to an
- MMC sector boundary.
-
- CONFIG_ENV_OFFSET_REDUND (optional):
-
- Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
- hold a redundant copy of the environment data. This provides a
- valid backup copy in case the other copy is corrupted, e.g. due
- to a power failure during a "saveenv" operation.
-
- This value may also be positive or negative; this is handled in the
- same way as CONFIG_ENV_OFFSET.
-
- This value is also in units of bytes, but must also be aligned to
- an MMC sector boundary.
-
- CONFIG_ENV_SIZE_REDUND (optional):
-
- This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
- set. If this value is set, it must be set to the same value as
- CONFIG_ENV_SIZE.
-
-config ENV_IS_IN_NAND
- bool "Environment in a NAND device"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have a NAND device which you want to use for the
- environment.
-
- - CONFIG_ENV_OFFSET:
- - CONFIG_ENV_SIZE:
-
- These two #defines specify the offset and size of the environment
- area within the first NAND device. CONFIG_ENV_OFFSET must be
- aligned to an erase block boundary.
-
- - CONFIG_ENV_OFFSET_REDUND (optional):
-
- This setting describes a second storage area of CONFIG_ENV_SIZE
- size used to hold a redundant copy of the environment data, so
- that there is a valid backup copy in case there is a power failure
- during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
- aligned to an erase block boundary.
-
- - CONFIG_ENV_RANGE (optional):
-
- Specifies the length of the region in which the environment
- can be written. This should be a multiple of the NAND device's
- block size. Specifying a range with more erase blocks than
- are needed to hold CONFIG_ENV_SIZE allows bad blocks within
- the range to be avoided.
-
- - CONFIG_ENV_OFFSET_OOB (optional):
-
- Enables support for dynamically retrieving the offset of the
- environment from block zero's out-of-band data. The
- "nand env.oob" command can be used to record this offset.
- Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
- using CONFIG_ENV_OFFSET_OOB.
-
-config ENV_IS_IN_NVRAM
- bool "Environment in a non-volatile RAM"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have some non-volatile memory device
- (NVRAM, battery buffered SRAM) which you want to use for the
- environment.
-
- - CONFIG_ENV_ADDR:
- - CONFIG_ENV_SIZE:
-
- These two #defines are used to determine the memory area you
- want to use for environment. It is assumed that this memory
- can just be read and written to, without any special
- provision.
-
-config ENV_IS_IN_ONENAND
- bool "Environment is in OneNAND"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you want to put your local device's environment in
- OneNAND.
-
- - CONFIG_ENV_ADDR:
- - CONFIG_ENV_SIZE:
-
- These two #defines are used to determine the device range you
- want to use for environment. It is assumed that this memory
- can just be read and written to, without any special
- provision.
-
-config ENV_IS_IN_REMOTE
- bool "Environment is in remove memory space"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have a remote memory space which you
- want to use for the local device's environment.
-
- - CONFIG_ENV_ADDR:
- - CONFIG_ENV_SIZE:
-
- These two #defines specify the address and size of the
- environment area within the remote memory space. The
- local device can get the environment from remote memory
- space by SRIO or PCIE links.
-
-config ENV_IS_IN_SPI_FLASH
- bool "Environment is in SPI flash"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have a SPI Flash memory device which you
- want to use for the environment.
-
- - CONFIG_ENV_OFFSET:
- - CONFIG_ENV_SIZE:
-
- These two #defines specify the offset and size of the
- environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
- aligned to an erase sector boundary.
-
- - CONFIG_ENV_SECT_SIZE:
-
- Define the SPI flash's sector size.
-
- - CONFIG_ENV_OFFSET_REDUND (optional):
-
- This setting describes a second storage area of CONFIG_ENV_SIZE
- size used to hold a redundant copy of the environment data, so
- that there is a valid backup copy in case there is a power failure
- during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
- aligned to an erase sector boundary.
-
- - CONFIG_ENV_SPI_BUS (optional):
- - CONFIG_ENV_SPI_CS (optional):
-
- Define the SPI bus and chip select. If not defined they will be 0.
-
- - CONFIG_ENV_SPI_MAX_HZ (optional):
-
- Define the SPI max work clock. If not defined then use 1MHz.
-
- - CONFIG_ENV_SPI_MODE (optional):
-
- Define the SPI work mode. If not defined then use SPI_MODE_3.
-
-config ENV_IS_IN_UBI
- bool "Environment in a UBI volume"
- depends on !CHAIN_OF_TRUST
- help
- Define this if you have an UBI volume that you want to use for the
- environment. This has the benefit of wear-leveling the environment
- accesses, which is important on NAND.
-
- - CONFIG_ENV_UBI_PART:
-
- Define this to a string that is the mtd partition containing the UBI.
-
- - CONFIG_ENV_UBI_VOLUME:
-
- Define this to the name of the volume that you want to store the
- environment in.
-
- - CONFIG_ENV_UBI_VOLUME_REDUND:
-
- Define this to the name of another volume to store a second copy of
- the environment in. This will enable redundant environments in UBI.
- It is assumed that both volumes are in the same MTD partition.
-
- - CONFIG_UBI_SILENCE_MSG
- - CONFIG_UBIFS_SILENCE_MSG
-
- You will probably want to define these to avoid a really noisy system
- when storing the env in UBI.
-
-config ENV_IS_NOWHERE
- bool "Environment is not stored"
- help
- Define this if you don't want to or can't have an environment stored
- on a storage medium
-
-if ARCH_SUNXI
-
-config ENV_OFFSET
- hex "Environment Offset"
- depends on !ENV_IS_IN_UBI
- depends on !ENV_IS_NOWHERE
- default 0x88000 if ARCH_SUNXI
- help
- Offset from the start of the device (or partition)
-
-config ENV_SIZE
- hex "Environment Size"
- depends on !ENV_IS_NOWHERE
- default 0x20000 if ARCH_SUNXI
- help
- Size of the environment storage area
-
-config ENV_UBI_PART
- string "UBI partition name"
- depends on ENV_IS_IN_UBI
- help
- MTD partition containing the UBI device
-
-config ENV_UBI_VOLUME
- string "UBI volume name"
- depends on ENV_IS_IN_UBI
- help
- Name of the volume that you want to store the environment in.
-
-endif
-
-endmenu
-
config BOOTDELAY
int "delay in seconds before automatically booting"
default 2
diff --git a/common/Makefile b/common/Makefile
index 17a92ea2d7..289e491cc5 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -19,7 +19,7 @@ ifdef CONFIG_BOOT_RETRY_TIME
obj-y += bootretry.o
endif
-# boards
+# # boards
obj-y += board_f.o
obj-y += board_r.o
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
@@ -29,29 +29,6 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o
obj-$(CONFIG_CMD_BOOTZ) += bootm.o bootm_os.o
obj-$(CONFIG_CMD_BOOTI) += bootm.o bootm_os.o
-# environment
-obj-y += env_attr.o
-obj-y += env_callback.o
-obj-y += env_flags.o
-obj-$(CONFIG_ENV_IS_IN_DATAFLASH) += env_dataflash.o
-obj-$(CONFIG_ENV_IS_IN_EEPROM) += env_eeprom.o
-extra-$(CONFIG_ENV_IS_EMBEDDED) += env_embedded.o
-obj-$(CONFIG_ENV_IS_IN_EEPROM) += env_embedded.o
-extra-$(CONFIG_ENV_IS_IN_FLASH) += env_embedded.o
-obj-$(CONFIG_ENV_IS_IN_NVRAM) += env_embedded.o
-obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
-obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
-obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o
-obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o
-obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
-obj-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o
-obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o
-obj-$(CONFIG_ENV_IS_IN_SATA) += env_sata.o
-obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
-obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
-obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
-obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
-
obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
obj-$(CONFIG_$(SPL_)OF_LIBFDT) += fdt_support.o
@@ -92,7 +69,6 @@ ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu.o
obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
-obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
@@ -101,28 +77,7 @@ ifdef CONFIG_SPL_USB_HOST_SUPPORT
obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
endif
-# environment
-ifdef CONFIG_TPL_BUILD
-obj-$(CONFIG_TPL_ENV_SUPPORT) += env_attr.o
-obj-$(CONFIG_TPL_ENV_SUPPORT) += env_flags.o
-obj-$(CONFIG_TPL_ENV_SUPPORT) += env_callback.o
-else
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
-obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
-endif
-ifneq ($(CONFIG_TPL_ENV_SUPPORT)$(CONFIG_SPL_ENV_SUPPORT),)
-obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
-obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
-obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o
-obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o
-obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
-obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
-obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
-endif
endif
-#environment
-obj-y += env_common.o
#others
obj-$(CONFIG_DDR_SPD) += ddr_spd.o
obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o
@@ -173,5 +128,3 @@ obj-$(CONFIG_CMD_DFU) += dfu.o
obj-y += command.o
obj-y += s_record.o
obj-y += xyzModem.o
-
-CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/env/Kconfig b/env/Kconfig
new file mode 100644
index 0000000000..6e885f85a6
--- /dev/null
+++ b/env/Kconfig
@@ -0,0 +1,428 @@
+menu "Environment"
+
+config ENV_IS_IN_DATAFLASH
+ bool "Environment in dataflash"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you have a DataFlash memory device which you
+ want to use for the environment.
+
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
+
+ These three #defines specify the offset and size of the
+ environment area within the total memory of your DataFlash placed
+ at the specified address.
+
+config ENV_IS_IN_EEPROM
+ bool "Environment in EEPROM"
+ depends on !CHAIN_OF_TRUST
+ help
+ Use this if you have an EEPROM or similar serial access
+ device and a driver for it.
+
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines specify the offset and size of the
+ environment area within the total memory of your EEPROM.
+
+ - CONFIG_SYS_I2C_EEPROM_ADDR:
+ If defined, specified the chip address of the EEPROM device.
+ The default address is zero.
+
+ - CONFIG_SYS_I2C_EEPROM_BUS:
+ If defined, specified the i2c bus of the EEPROM device.
+
+ - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
+ If defined, the number of bits used to address bytes in a
+ single page in the EEPROM device. A 64 byte page, for example
+ would require six bits.
+
+ - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS:
+ If defined, the number of milliseconds to delay between
+ page writes. The default is zero milliseconds.
+
+ - CONFIG_SYS_I2C_EEPROM_ADDR_LEN:
+ The length in bytes of the EEPROM memory array address. Note
+ that this is NOT the chip address length!
+
+ - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW:
+ EEPROM chips that implement "address overflow" are ones
+ like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ address and the extra bits end up in the "chip address" bit
+ slots. This makes a 24WC08 (1Kbyte) chip look like four 256
+ byte chips.
+
+ Note that we consider the length of the address field to
+ still be one byte because the extra address bits are hidden
+ in the chip address.
+
+ - CONFIG_SYS_EEPROM_SIZE:
+ The size in bytes of the EEPROM device.
+
+ - CONFIG_ENV_EEPROM_IS_ON_I2C
+ define this, if you have I2C and SPI activated, and your
+ EEPROM, which holds the environment, is on the I2C bus.
+
+ - CONFIG_I2C_ENV_EEPROM_BUS
+ if you have an Environment on an EEPROM reached over
+ I2C muxes, you can define here, how to reach this
+ EEPROM. For example:
+
+ #define CONFIG_I2C_ENV_EEPROM_BUS 1
+
+ EEPROM which holds the environment, is reached over
+ a pca9547 i2c mux with address 0x70, channel 3.
+
+config ENV_IS_IN_FAT
+ bool "Environment is in a FAT filesystem"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you want to use the FAT file system for the environment.
+
+ - FAT_ENV_INTERFACE:
+
+ Define this to a string that is the name of the block device.
+
+ - FAT_ENV_DEVICE_AND_PART:
+
+ Define this to a string to specify the partition of the device. It can
+ be as following:
+
+ "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
+ - "D:P": device D partition P. Error occurs if device D has no
+ partition table.
+ - "D:0": device D.
+ - "D" or "D:": device D partition 1 if device D has partition
+ table, or the whole device D if has no partition
+ table.
+ - "D:auto": first partition in device D with bootable flag set.
+ If none, first valid partition in device D. If no
+ partition table then means device D.
+
+ - FAT_ENV_FILE:
+
+ It's a string of the FAT file name. This file use to store the
+ environment.
+
+ - CONFIG_FAT_WRITE:
+ This must be enabled. Otherwise it cannot save the environment file.
+
+config ENV_IS_IN_FLASH
+ bool "Environment in flash memory"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you have a flash device which you want to use for the
+ environment.
+
+ a) The environment occupies one whole flash sector, which is
+ "embedded" in the text segment with the U-Boot code. This
+ happens usually with "bottom boot sector" or "top boot
+ sector" type flash chips, which have several smaller
+ sectors at the start or the end. For instance, such a
+ layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In
+ such a case you would place the environment in one of the
+ 4 kB sectors - with U-Boot code before and after it. With
+ "top boot sector" type flash chips, you would put the
+ environment in one of the last sectors, leaving a gap
+ between U-Boot and the environment.
+
+ CONFIG_ENV_OFFSET:
+
+ Offset of environment data (variable area) to the
+ beginning of flash memory; for instance, with bottom boot
+ type flash chips the second sector can be used: the offset
+ for this sector is given here.
+
+ CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
+
+ CONFIG_ENV_ADDR:
+
+ This is just another way to specify the start address of
+ the flash sector containing the environment (instead of
+ CONFIG_ENV_OFFSET).
+
+ CONFIG_ENV_SECT_SIZE:
+
+ Size of the sector containing the environment.
+
+
+ b) Sometimes flash chips have few, equal sized, BIG sectors.
+ In such a case you don't want to spend a whole sector for
+ the environment.
+
+ CONFIG_ENV_SIZE:
+
+ If you use this in combination with CONFIG_ENV_IS_IN_FLASH
+ and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
+ of this flash sector for the environment. This saves
+ memory for the RAM copy of the environment.
+
+ It may also save flash memory if you decide to use this
+ when your environment is "embedded" within U-Boot code,
+ since then the remainder of the flash sector could be used
+ for U-Boot code. It should be pointed out that this is
+ STRONGLY DISCOURAGED from a robustness point of view:
+ updating the environment in flash makes it always
+ necessary to erase the WHOLE sector. If something goes
+ wrong before the contents has been restored from a copy in
+ RAM, your target system will be dead.
+
+ CONFIG_ENV_ADDR_REDUND
+ CONFIG_ENV_SIZE_REDUND
+
+ These settings describe a second storage area used to hold
+ a redundant copy of the environment data, so that there is
+ a valid backup copy in case there is a power failure during
+ a "saveenv" operation.
+
+ BE CAREFUL! Any changes to the flash layout, and some changes to the
+ source code will make it necessary to adapt <board>/u-boot.lds*
+ accordingly!
+
+config ENV_IS_IN_MMC
+ bool "Environment in an MMC device"
+ depends on !CHAIN_OF_TRUST
+ default y if ARCH_SUNXI
+ help
+ Define this if you have an MMC device which you want to use for the
+ environment.
+
+ CONFIG_SYS_MMC_ENV_DEV:
+
+ Specifies which MMC device the environment is stored in.
+
+ CONFIG_SYS_MMC_ENV_PART (optional):
+
+ Specifies which MMC partition the environment is stored in. If not
+ set, defaults to partition 0, the user area. Common values might be
+ 1 (first MMC boot partition), 2 (second MMC boot partition).
+
+ CONFIG_ENV_OFFSET:
+ CONFIG_ENV_SIZE:
+
+ These two #defines specify the offset and size of the environment
+ area within the specified MMC device.
+
+ If offset is positive (the usual case), it is treated as relative to
+ the start of the MMC partition. If offset is negative, it is treated
+ as relative to the end of the MMC partition. This can be useful if
+ your board may be fitted with different MMC devices, which have
+ different sizes for the MMC partitions, and you always want the
+ environment placed at the very end of the partition, to leave the
+ maximum possible space before it, to store other data.
+
+ These two values are in units of bytes, but must be aligned to an
+ MMC sector boundary.
+
+ CONFIG_ENV_OFFSET_REDUND (optional):
+
+ Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
+ hold a redundant copy of the environment data. This provides a
+ valid backup copy in case the other copy is corrupted, e.g. due
+ to a power failure during a "saveenv" operation.
+
+ This value may also be positive or negative; this is handled in the
+ same way as CONFIG_ENV_OFFSET.
+
+ This value is also in units of bytes, but must also be aligned to
+ an MMC sector boundary.
+
+ CONFIG_ENV_SIZE_REDUND (optional):
+
+ This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
+ set. If this value is set, it must be set to the same value as
+ CONFIG_ENV_SIZE.
+
+config ENV_IS_IN_NAND
+ bool "Environment in a NAND device"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you have a NAND device which you want to use for the
+ environment.
+
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines specify the offset and size of the environment
+ area within the first NAND device. CONFIG_ENV_OFFSET must be
+ aligned to an erase block boundary.
+
+ - CONFIG_ENV_OFFSET_REDUND (optional):
+
+ This setting describes a second storage area of CONFIG_ENV_SIZE
+ size used to hold a redundant copy of the environment data, so
+ that there is a valid backup copy in case there is a power failure
+ during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
+ aligned to an erase block boundary.
+
+ - CONFIG_ENV_RANGE (optional):
+
+ Specifies the length of the region in which the environment
+ can be written. This should be a multiple of the NAND device's
+ block size. Specifying a range with more erase blocks than
+ are needed to hold CONFIG_ENV_SIZE allows bad blocks within
+ the range to be avoided.
+
+ - CONFIG_ENV_OFFSET_OOB (optional):
+
+ Enables support for dynamically retrieving the offset of the
+ environment from block zero's out-of-band data. The
+ "nand env.oob" command can be used to record this offset.
+ Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
+ using CONFIG_ENV_OFFSET_OOB.
+
+config ENV_IS_IN_NVRAM
+ bool "Environment in a non-volatile RAM"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you have some non-volatile memory device
+ (NVRAM, battery buffered SRAM) which you want to use for the
+ environment.
+
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines are used to determine the memory area you
+ want to use for environment. It is assumed that this memory
+ can just be read and written to, without any special
+ provision.
+
+config ENV_IS_IN_ONENAND
+ bool "Environment is in OneNAND"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you want to put your local device's environment in
+ OneNAND.
+
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines are used to determine the device range you
+ want to use for environment. It is assumed that this memory
+ can just be read and written to, without any special
+ provision.
+
+config ENV_IS_IN_REMOTE
+ bool "Environment is in remove memory space"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you have a remote memory space which you
+ want to use for the local device's environment.
+
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines specify the address and size of the
+ environment area within the remote memory space. The
+ local device can get the environment from remote memory
+ space by SRIO or PCIE links.
+
+config ENV_IS_IN_SPI_FLASH
+ bool "Environment is in SPI flash"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you have a SPI Flash memory device which you
+ want to use for the environment.
+
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines specify the offset and size of the
+ environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
+ aligned to an erase sector boundary.
+
+ - CONFIG_ENV_SECT_SIZE:
+
+ Define the SPI flash's sector size.
+
+ - CONFIG_ENV_OFFSET_REDUND (optional):
+
+ This setting describes a second storage area of CONFIG_ENV_SIZE
+ size used to hold a redundant copy of the environment data, so
+ that there is a valid backup copy in case there is a power failure
+ during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
+ aligned to an erase sector boundary.
+
+ - CONFIG_ENV_SPI_BUS (optional):
+ - CONFIG_ENV_SPI_CS (optional):
+
+ Define the SPI bus and chip select. If not defined they will be 0.
+
+ - CONFIG_ENV_SPI_MAX_HZ (optional):
+
+ Define the SPI max work clock. If not defined then use 1MHz.
+
+ - CONFIG_ENV_SPI_MODE (optional):
+
+ Define the SPI work mode. If not defined then use SPI_MODE_3.
+
+config ENV_IS_IN_UBI
+ bool "Environment in a UBI volume"
+ depends on !CHAIN_OF_TRUST
+ help
+ Define this if you have an UBI volume that you want to use for the
+ environment. This has the benefit of wear-leveling the environment
+ accesses, which is important on NAND.
+
+ - CONFIG_ENV_UBI_PART:
+
+ Define this to a string that is the mtd partition containing the UBI.
+
+ - CONFIG_ENV_UBI_VOLUME:
+
+ Define this to the name of the volume that you want to store the
+ environment in.
+
+ - CONFIG_ENV_UBI_VOLUME_REDUND:
+
+ Define this to the name of another volume to store a second copy of
+ the environment in. This will enable redundant environments in UBI.
+ It is assumed that both volumes are in the same MTD partition.
+
+ - CONFIG_UBI_SILENCE_MSG
+ - CONFIG_UBIFS_SILENCE_MSG
+
+ You will probably want to define these to avoid a really noisy system
+ when storing the env in UBI.
+
+config ENV_IS_NOWHERE
+ bool "Environment is not stored"
+ help
+ Define this if you don't want to or can't have an environment stored
+ on a storage medium
+
+if ARCH_SUNXI
+
+config ENV_OFFSET
+ hex "Environment Offset"
+ depends on !ENV_IS_IN_UBI
+ depends on !ENV_IS_NOWHERE
+ default 0x88000 if ARCH_SUNXI
+ help
+ Offset from the start of the device (or partition)
+
+config ENV_SIZE
+ hex "Environment Size"
+ depends on !ENV_IS_NOWHERE
+ default 0x20000 if ARCH_SUNXI
+ help
+ Size of the environment storage area
+
+config ENV_UBI_PART
+ string "UBI partition name"
+ depends on ENV_IS_IN_UBI
+ help
+ MTD partition containing the UBI device
+
+config ENV_UBI_VOLUME
+ string "UBI volume name"
+ depends on ENV_IS_IN_UBI
+ help
+ Name of the volume that you want to store the environment in.
+
+endif
+
+endmenu
diff --git a/env/Makefile b/env/Makefile
new file mode 100644
index 0000000000..4c1bdcfdf4
--- /dev/null
+++ b/env/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2004-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += common.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y += attr.o
+obj-y += callback.o
+obj-y += flags.o
+obj-$(CONFIG_ENV_IS_IN_DATAFLASH) += dataflash.o
+obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o
+extra-$(CONFIG_ENV_IS_EMBEDDED) += embedded.o
+obj-$(CONFIG_ENV_IS_IN_EEPROM) += embedded.o
+extra-$(CONFIG_ENV_IS_IN_FLASH) += embedded.o
+obj-$(CONFIG_ENV_IS_IN_NVRAM) += embedded.o
+obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o
+obj-$(CONFIG_ENV_IS_IN_MMC) += mmc.o
+obj-$(CONFIG_ENV_IS_IN_FAT) += fat.o
+obj-$(CONFIG_ENV_IS_IN_EXT4) += ext4.o
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand.o
+obj-$(CONFIG_ENV_IS_IN_NVRAM) += nvram.o
+obj-$(CONFIG_ENV_IS_IN_ONENAND) += onenand.o
+obj-$(CONFIG_ENV_IS_IN_SATA) += sata.o
+obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += sf.o
+obj-$(CONFIG_ENV_IS_IN_REMOTE) += remote.o
+obj-$(CONFIG_ENV_IS_IN_UBI) += ubi.o
+obj-$(CONFIG_ENV_IS_NOWHERE) += nowhere.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o
+# environment
+ifdef CONFIG_TPL_BUILD
+obj-$(CONFIG_TPL_ENV_SUPPORT) += attr.o
+obj-$(CONFIG_TPL_ENV_SUPPORT) += flags.o
+obj-$(CONFIG_TPL_ENV_SUPPORT) += callback.o
+else
+obj-$(CONFIG_SPL_ENV_SUPPORT) += attr.o
+obj-$(CONFIG_SPL_ENV_SUPPORT) += flags.o
+obj-$(CONFIG_SPL_ENV_SUPPORT) += callback.o
+endif
+ifneq ($(CONFIG_TPL_ENV_SUPPORT)$(CONFIG_SPL_ENV_SUPPORT),)
+obj-$(CONFIG_ENV_IS_NOWHERE) += nowhere.o
+obj-$(CONFIG_ENV_IS_IN_MMC) += mmc.o
+obj-$(CONFIG_ENV_IS_IN_FAT) += fat.o
+obj-$(CONFIG_ENV_IS_IN_EXT4) += ext4.o
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand.o
+obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += sf.o
+obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o
+endif
+endif
+
+CFLAGS_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/common/env_attr.c b/env/attr.c
similarity index 100%
rename from common/env_attr.c
rename to env/attr.c
diff --git a/common/env_callback.c b/env/callback.c
similarity index 100%
rename from common/env_callback.c
rename to env/callback.c
diff --git a/common/env_common.c b/env/common.c
similarity index 100%
rename from common/env_common.c
rename to env/common.c
diff --git a/common/env_dataflash.c b/env/dataflash.c
similarity index 100%
rename from common/env_dataflash.c
rename to env/dataflash.c
diff --git a/common/env_eeprom.c b/env/eeprom.c
similarity index 100%
rename from common/env_eeprom.c
rename to env/eeprom.c
diff --git a/common/env_embedded.c b/env/embedded.c
similarity index 100%
rename from common/env_embedded.c
rename to env/embedded.c
diff --git a/common/env_ext4.c b/env/ext4.c
similarity index 100%
rename from common/env_ext4.c
rename to env/ext4.c
diff --git a/common/env_fat.c b/env/fat.c
similarity index 100%
rename from common/env_fat.c
rename to env/fat.c
diff --git a/common/env_flags.c b/env/flags.c
similarity index 100%
rename from common/env_flags.c
rename to env/flags.c
diff --git a/common/env_flash.c b/env/flash.c
similarity index 100%
rename from common/env_flash.c
rename to env/flash.c
diff --git a/common/env_mmc.c b/env/mmc.c
similarity index 100%
rename from common/env_mmc.c
rename to env/mmc.c
diff --git a/common/env_nand.c b/env/nand.c
similarity index 100%
rename from common/env_nand.c
rename to env/nand.c
diff --git a/common/env_nowhere.c b/env/nowhere.c
similarity index 100%
rename from common/env_nowhere.c
rename to env/nowhere.c
diff --git a/common/env_nvram.c b/env/nvram.c
similarity index 100%
rename from common/env_nvram.c
rename to env/nvram.c
diff --git a/common/env_onenand.c b/env/onenand.c
similarity index 100%
rename from common/env_onenand.c
rename to env/onenand.c
diff --git a/common/env_remote.c b/env/remote.c
similarity index 100%
rename from common/env_remote.c
rename to env/remote.c
diff --git a/common/env_sata.c b/env/sata.c
similarity index 100%
rename from common/env_sata.c
rename to env/sata.c
diff --git a/common/env_sf.c b/env/sf.c
similarity index 100%
rename from common/env_sf.c
rename to env/sf.c
diff --git a/common/env_ubi.c b/env/ubi.c
similarity index 100%
rename from common/env_ubi.c
rename to env/ubi.c
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index 0fbf457cdc..c56cbd9f54 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -161,8 +161,8 @@
#define CONFIG_ENV_SECT_SIZE 0x2000
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text*);
/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 57328c6269..c3fdc0b106 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -179,7 +179,7 @@
#define LDS_BOARD_TEXT \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text);
+ env/embedded.o(.text);
#ifdef NORFLASH_PS32BIT
# define CONFIG_ENV_OFFSET (0x8000)
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index f6027e231f..df0733e6c2 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -85,8 +85,8 @@
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text);
#define CONFIG_ENV_OFFSET 0x4000 /* Address of Environment Sector*/
#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 2bdfe80ef5..da8333ac6f 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -29,8 +29,8 @@
#endif
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text*);
/*
* Command line configuration.
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index 0722ea19e3..5a2f0e204f 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -31,7 +31,7 @@
#define LDS_BOARD_TEXT \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text)
+ env/embedded.o(.text)
/*
* BOOTP options
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index e6bd7f3609..f5693d8178 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -39,8 +39,8 @@
#endif
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text);
/*
* BOOTP options
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 6bcd6b6f2e..339a03c7b1 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -40,8 +40,8 @@
#endif
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text);
/*
* BOOTP options
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index cc703aac19..3f2d9a9bac 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -32,7 +32,7 @@
#define LDS_BOARD_TEXT \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*);
+ env/embedded.o(.text*);
/*
* BOOTP options
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index d50c874fe1..a0c9dd904d 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -185,7 +185,7 @@
#define LDS_BOARD_TEXT \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*)
+ env/embedded.o(.text*)
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index 45cdf9da15..d6b5531833 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -189,8 +189,8 @@
#define CONFIG_ENV_SECT_SIZE 0x2000
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text*);
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 26639fc41f..07dfe7aec3 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -189,8 +189,8 @@
#define CONFIG_ENV_SECT_SIZE 0x2000
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text*);
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/amcore.h b/include/configs/amcore.h
index 0a40746112..5f8b6c5518 100644
--- a/include/configs/amcore.h
+++ b/include/configs/amcore.h
@@ -93,8 +93,8 @@
#define CONFIG_ENV_SECT_SIZE 0x1000
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text*);
/* memory map space for linux boot data */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h
index 723bc154b3..8d3fe4268c 100644
--- a/include/configs/astro_mcf5373l.h
+++ b/include/configs/astro_mcf5373l.h
@@ -302,7 +302,7 @@
#define LDS_BOARD_TEXT \
. = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text*)
+ env/embedded.o(.text*)
#if ENABLE_JFFS
/* JFFS Partition offset set */
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index a3b7b219b3..c1c3013dc3 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -102,8 +102,8 @@
#endif
#define LDS_BOARD_TEXT \
- . = DEFINED(env_offset) ? env_offset : .; \
- common/env_embedded.o (.text);
+ . = DEFINED(env_offset) ? env_offset : .; \
+ env/embedded.o(.text);
/*
* BOOTP options
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index ac3c2c7f13..f25a8bf725 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -69,10 +69,10 @@ libs-y += common/init/
# Special handling for a few options which support SPL/TPL
ifeq ($(CONFIG_TPL_BUILD),y)
-libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
else
-libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
endif
diff --git a/tools/Makefile b/tools/Makefile
index 62a7921e43..7e7c8207cd 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -37,7 +37,7 @@ hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
HOSTCFLAGS_bmp_logo.o := -pedantic
hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc
-envcrc-objs := envcrc.o lib/crc32.o common/env_embedded.o lib/sha1.o
+envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o
hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr
HOSTCFLAGS_gen_eth_addr.o := -pedantic
@@ -223,7 +223,7 @@ HOSTCFLAGS_sha256.o := -pedantic
quiet_cmd_wrap = WRAP $@
cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
-$(obj)/lib/%.c $(obj)/common/%.c:
+$(obj)/lib/%.c $(obj)/common/%.c $(obj)/env/%.c:
$(call cmd,wrap)
clean-dirs := lib common
--
2.14.0.rc0.400.g1c36432dff-goog
More information about the U-Boot
mailing list