[U-Boot] [PATCH v3] Makefile: Concatenation of u-boot-spl.bin and u-boot.img

[Ashish Kumar]

Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape
platform SoC: LS1088A/LS2080A and their variants

This patch also depricates UBOOT_BINLOAD in favour of SPL_PAYLOAD

Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
---

v2:
This is v2 version of https://patchwork.ozlabs.org/patch/755904/

Also depricate UBOOT_BINLOAD

v3: 
Reverse the logic to check for PowerPC and use .bin 
format else use .img format

 Makefile | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/Makefile b/Makefile
index a1a3aea..0666c72 100644
--- a/Makefile
+++ b/Makefile
@@ -1033,8 +1033,20 @@ u-boot.dis:	u-boot
 ifdef CONFIG_TPL
 SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
 else
+ifeq ($(ARCH),powerpc)
+ifdef CONFIG_OF_CONTROL
+SPL_PAYLOAD := u-boot-dtb.bin
+else
 SPL_PAYLOAD := u-boot.bin
-endif
+endif	#ifdef CONFIG_OF_CONTROL
+else
+ifdef CONFIG_OF_CONTROL
+SPL_PAYLOAD := u-boot-dtb.img
+else
+SPL_PAYLOAD := u-boot.img
+endif	#ifdef CONFIG_OF_CONTROL
+endif	#ifdef powerpc
+endif	#ifdef CONFIG_TPL
 
 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 				   --pad-to=$(CONFIG_SPL_PAD_TO)
@@ -1197,16 +1209,11 @@ MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 
-ifeq ($(ARCH),arm)
-UBOOT_BINLOAD := u-boot.img
-else
-UBOOT_BINLOAD := u-boot.bin
-endif
 
 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
 			  --gap-fill=0xff
 
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
 
 # PPC4xx needs the SPL at the end of the image, since the reset vector
-- 
2.7.4