[U-Boot] [PATCH 2/6] rockchip: defconfig: puma-rk3399: update defconfig with video-support

[Simon Glass]

On 31 May 2017 at 10:18, Philipp Tomsich
<philipp.tomsich at theobroma-systems.com> wrote:
> With HDMI output for the RK3399 working, this update the RK3399-Q7
> (Puma) defconfig for the new functionality:
> 1. enables PMIC command (to check if the HDMI voltages are correct)
>       +CONFIG_CMD_PMIC=y
>       +CONFIG_CMD_REGULATOR=y
> 2. enables video-output (via HDMI)
>       +CONFIG_DM_VIDEO=y
>       +CONFIG_DISPLAY=y
>       +CONFIG_VIDEO_ROCKCHIP=y
>       +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> 3. turns on the 'dcache'-command (for a dcache flush) for our QA to
>    fill the framebuffer using 'mw.l'
>       +CONFIG_CMD_CACHE=y
> 4. turns on the 'bmp'-command
>       +CONFIG_CMD_BMP=y
>
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>
> ---
>
> Changes in v2:
> - enable CMD_BMP in the puma-rk3399_defconfig (following a rebase to
>   the upstream master after CMD_BMP was migrate to Kconfig)
>
>  configs/puma-rk3399_defconfig | 8 ++++++++
>  1 file changed, 8 insertions(+)

Reviewed-by: Simon Glass <sjg at chromium.org>