[U-Boot] [PATCH 2/6] rockchip: defconfig: puma-rk3399: update defconfig with video-support

[Simon Glass]

Hi Phlilpp,

On 1 June 2017 at 20:55, Simon Glass <sjg at chromium.org> wrote:
> On 31 May 2017 at 10:18, Philipp Tomsich
> <philipp.tomsich at theobroma-systems.com> wrote:
>> With HDMI output for the RK3399 working, this update the RK3399-Q7
>> (Puma) defconfig for the new functionality:
>> 1. enables PMIC command (to check if the HDMI voltages are correct)
>>       +CONFIG_CMD_PMIC=y
>>       +CONFIG_CMD_REGULATOR=y
>> 2. enables video-output (via HDMI)
>>       +CONFIG_DM_VIDEO=y
>>       +CONFIG_DISPLAY=y
>>       +CONFIG_VIDEO_ROCKCHIP=y
>>       +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
>> 3. turns on the 'dcache'-command (for a dcache flush) for our QA to
>>    fill the framebuffer using 'mw.l'
>>       +CONFIG_CMD_CACHE=y
>> 4. turns on the 'bmp'-command
>>       +CONFIG_CMD_BMP=y
>>
>> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>>
>> ---
>>
>> Changes in v2:
>> - enable CMD_BMP in the puma-rk3399_defconfig (following a rebase to
>>   the upstream master after CMD_BMP was migrate to Kconfig)
>>
>>  configs/puma-rk3399_defconfig | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>
> Reviewed-by: Simon Glass <sjg at chromium.org>

Sadly another build error:

+drivers/video/rockchip/rk_hdmi.c:150: undefined reference to `rk_setreg'
+drivers/video/rockchip/rk_hdmi.c:153: undefined reference to `rk_clrsetreg'