[U-Boot] [PATCH v2] sun50i: h5: Add initial Orangepi Prime support

[Maxime Ripard]

On Thu, Jun 01, 2017 at 03:25:32PM +0000, Jagan Teki wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
> 
> Orangepi Prime is an open-source single-board computer
> using the Allwinner h5 SOC.
> 
> H5 Orangepi Prime has
> - Quad-core Cortex-A53
> - 2GB DDR3
> - Debug TTL UART
> - 1000M/100M Ethernet RJ45
> - Three USB 2.0
> - HDMI
> - Audio and MIC
> - Wifi + BT
> - IR receiver
> - HDMI
> - Wifi + BT
> 
> Boot from MMC:
> -------------
> U-Boot SPL 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14)
> DRAM: 2048 MiB
> Trying to boot from MMC1
> NOTICE:  BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000)
> NOTICE:  Configuring SPC Controller
> NOTICE:  BL3-1: v1.0(debug):aa75c8d
> NOTICE:  BL3-1: Built : 18:28:27, May 24 2017
> INFO:    BL3-1: Initializing runtime services
> INFO:    BL3-1: Preparing for EL3 exit to normal world
> INFO:    BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
> 
> U-Boot 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14 +0000) Allwinner Technology
> 
> CPU:   Allwinner H5 (SUN50I)
> Model: OrangePi Prime
> DRAM:  2 GiB
> MMC:   SUNXI SD/MMC: 0
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> Net:   phy interface7
> eth0: ethernet at 1c30000
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot:  0
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170602/36d9cdb4/attachment.sig>