[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
> On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
> > > 
> > > On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> > > > 
> > > > 
> > > > On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
> > > > > 
> > > > > 
> > > > > > 
> > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > > > > 
> > > > > > > This patch is for enabling the FPGA driver support on
> > > > > > > SPL.
> > > > > > > 
> > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > > > > ---
> > > > > > >  include/configs/socfpga_common.h | 1 +
> > > > > > >  1 file changed, 1 insertion(+)
> > > > > > > 
> > > > > > > diff --git a/include/configs/socfpga_common.h
> > > > > > > b/include/configs/socfpga_common.h
> > > > > > > index da7e4ad..e74e7eb 100644
> > > > > > > --- a/include/configs/socfpga_common.h
> > > > > > > +++ b/include/configs/socfpga_common.h
> > > > > > > @@ -110,6 +110,7 @@
> > > > > > >  #define CONFIG_FPGA
> > > > > > >  #define CONFIG_FPGA_ALTERA
> > > > > > >  #define CONFIG_FPGA_SOCFPGA
> > > > > > > +#define CONFIG_SPL_FPGA_SUPPORT
> > > > > > This should be Kconfig symbol selected in board config. Why
> > > > > > is
> > > > > > it
> > > > > > not
> > > > > > Kconfig symbol ?
> > > > > > 
> > > > Ahha....ijust recalled there is a very important reason i did
> > > > this
> > > > because CONFIG_CMD_FPGA which is wrapping all these FPGA
> > > > related
> > > > CONFIG
> > > > is not part of kconfig.
> > > it is, so this is nonsense, try git grep next time ...
> > > cmd/Kconfig:config CMD_FPGA
> > > 
> > > > 
> > > > 
> > > > During the build, kconfig and Macro #define are
> > > > in two different phase/order, so we might having build issue
> > > > during
> > > > kconfig build(1st phase) when some Macro #define which is 2nd
> > > > phase
> > > > are
> > > > required.
> > > I don't understand this, but I think this is bogus.
> > > 
> > Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which is
> > defined in socfpga_common.h. When SPL build, CONFIG_A would not be
> > set
> > to one even CONFIG_B is defined to one in header file, because at
> > that
> > moment build, CONFIG_B is not detected, but header file only get
> > build
> > after Kconfig build done.
> Then convert whatever is missing to Kconfig and it's done ?
> 
Yeah, i will send out immediately after this patch set.