[U-Boot] [PATCH v7 3/6] arm: socfpga: Enable FPGA driver on SPL

[Chee, Tien Fong]

On Isn, 2017-06-05 at 14:15 +0200, Marek Vasut wrote:
> On 06/05/2017 02:11 PM, Chee, Tien Fong wrote:
> > 
> > On Isn, 2017-06-05 at 14:08 +0200, Marek Vasut wrote:
> > > 
> > > On 06/05/2017 02:06 PM, Chee, Tien Fong wrote:
> > > > 
> > > > 
> > > > On Isn, 2017-06-05 at 13:24 +0200, Marek Vasut wrote:
> > > > > 
> > > > > 
> > > > > On 06/05/2017 06:02 AM, Chee, Tien Fong wrote:
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > On Isn, 2017-06-05 at 11:32 +0800, Chee, Tien Fong wrote:
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > On Sab, 2017-06-03 at 13:27 +0200, Marek Vasut wrote:
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > On 05/29/2017 06:00 AM, tien.fong.chee at intel.com wrote:
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > > > > > > 
> > > > > > > > > This patch is for enabling the FPGA driver support on
> > > > > > > > > SPL.
> > > > > > > > > 
> > > > > > > > > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.c
> > > > > > > > > om>
> > > > > > > > > ---
> > > > > > > > >  include/configs/socfpga_common.h | 1 +
> > > > > > > > >  1 file changed, 1 insertion(+)
> > > > > > > > > 
> > > > > > > > > diff --git a/include/configs/socfpga_common.h
> > > > > > > > > b/include/configs/socfpga_common.h
> > > > > > > > > index da7e4ad..e74e7eb 100644
> > > > > > > > > --- a/include/configs/socfpga_common.h
> > > > > > > > > +++ b/include/configs/socfpga_common.h
> > > > > > > > > @@ -110,6 +110,7 @@
> > > > > > > > >  #define CONFIG_FPGA
> > > > > > > > >  #define CONFIG_FPGA_ALTERA
> > > > > > > > >  #define CONFIG_FPGA_SOCFPGA
> > > > > > > > > +#define CONFIG_SPL_FPGA_SUPPORT
> > > > > > > > This should be Kconfig symbol selected in board config.
> > > > > > > > Why
> > > > > > > > is
> > > > > > > > it
> > > > > > > > not
> > > > > > > > Kconfig symbol ?
> > > > > > > > 
> > > > > > Ahha....ijust recalled there is a very important reason i
> > > > > > did
> > > > > > this
> > > > > > because CONFIG_CMD_FPGA which is wrapping all these FPGA
> > > > > > related
> > > > > > CONFIG
> > > > > > is not part of kconfig.
> > > > > it is, so this is nonsense, try git grep next time ...
> > > > > cmd/Kconfig:config CMD_FPGA
> > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > During the build, kconfig and Macro #define are
> > > > > > in two different phase/order, so we might having build
> > > > > > issue
> > > > > > during
> > > > > > kconfig build(1st phase) when some Macro #define which is
> > > > > > 2nd
> > > > > > phase
> > > > > > are
> > > > > > required.
> > > > > I don't understand this, but I think this is bogus.
> > > > > 
> > > > Okay. For example, CONFIG_A in Kconfig depend on CONFIG_B which
> > > > is
> > > > defined in socfpga_common.h. When SPL build, CONFIG_A would not
> > > > be
> > > > set
> > > > to one even CONFIG_B is defined to one in header file, because
> > > > at
> > > > that
> > > > moment build, CONFIG_B is not detected, but header file only
> > > > get
> > > > build
> > > > after Kconfig build done.
> > > Then convert whatever is missing to Kconfig and it's done ?
> > > 
> > Yeah, i will send out immediately after this patch set.
> > 
> Please do things in sensible order ...
> 
I thought we already reach agreement that specific patch for converting
all to kconfig would be after this patch set, since it needs more time
for the tool to execute all the convertion, right?