[U-Boot] spi: Drop atmel_dataflash_spi.c

[Yang, Wenyou]

On 2017/6/6 19:11, Tom Rini wrote:
> On Tue, Jun 06, 2017 at 09:07:51AM +0000, Wenyou.Yang at microchip.com wrote:
>> Hi Tom,
>>
>>> On Mon, Jun 05, 2017 at 09:32:28PM +0200, Stelian Pop wrote:
>>>> Hi everybody,
>>>>
>>>>> The problem here is that you need to remove the boards in question
>>>>> as well.  I see the baord maintainer was Cc'd on this email, so this
>>>>> is a bit stronger of a poke, as I guess we need to drop these boards..
>>>> It looks like I'm still listed as the maintainer, although I haven't
>>>> been involved in u-boot development for years...
>>>>
>>>> I no longer have access to any AT91 board, so if someone wants to take
>>>> over, it's ok to me. Otherwise, you can mark those boards as orphaned,
>>>> or remove them from the tree.
>>> Thanks Stelian.  Wenyou, you've done some changes to some of these boards
>>> recently, would you care to pick them up, or should I go ahead and remove them?
>> Please don't remove these boards.
>>
>> We agree to drop atmel_dataflash_spi.c, and I will convert these
>> boards by using the new dataflash driver.
> Please do the conversion and then we can drop the old file (otherwise
> the build fails), and please send a patch updating the MAINTAINERS file
> soon, thanks!
All right, thanks.

>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

Best Regards,
Wenyou Yang