[U-Boot] [PATCH 14/20] configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards

Bin Meng bmeng.cn at gmail.com
Fri Jun 16 13:31:43 UTC 2017


Now that EHCD does not use CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS,
remove it in all boards' config files.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 arch/arm/include/asm/ehci-omap.h    | 4 ----
 include/configs/MPC8572DS.h         | 1 -
 include/configs/cm_t54.h            | 1 -
 include/configs/corvus.h            | 3 ---
 include/configs/duovero.h           | 2 --
 include/configs/exynos5-common.h    | 2 --
 include/configs/ma5d4evk.h          | 1 -
 include/configs/mcx.h               | 1 -
 include/configs/mvebu_armada-37xx.h | 7 +------
 include/configs/mvebu_armada-8k.h   | 7 +------
 include/configs/mx35pdk.h           | 1 -
 include/configs/odroid.h            | 1 -
 include/configs/omap3_beagle.h      | 1 -
 include/configs/omap3_overo.h       | 1 -
 include/configs/omap4_panda.h       | 2 --
 include/configs/omap5_uevm.h        | 1 -
 include/configs/picosam9g45.h       | 3 ---
 include/configs/sama5d2_ptc.h       | 4 ----
 include/configs/snapper9g45.h       | 3 ---
 include/configs/sunxi-common.h      | 1 -
 include/configs/tam3517-common.h    | 1 -
 include/configs/tao3530.h           | 1 -
 include/configs/tegra114-common.h   | 1 -
 include/configs/tegra124-common.h   | 1 -
 include/configs/tegra20-common.h    | 1 -
 include/configs/tegra210-common.h   | 1 -
 include/configs/tegra30-common.h    | 1 -
 include/configs/vinco.h             | 6 ------
 include/configs/x86-common.h        | 1 -
 scripts/config_whitelist.txt        | 1 -
 30 files changed, 2 insertions(+), 60 deletions(-)

diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h
index 5a53e40..9dbb2c4 100644
--- a/arch/arm/include/asm/ehci-omap.h
+++ b/arch/arm/include/asm/ehci-omap.h
@@ -19,11 +19,7 @@ enum usbhs_omap_port_mode {
 	OMAP_EHCI_PORT_MODE_HSIC,
 };
 
-#ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
-#define OMAP_HS_USB_PORTS	CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
-#else
 #define OMAP_HS_USB_PORTS	3
-#endif
 
 #define is_ehci_phy_mode(x)	((x) == OMAP_EHCI_PORT_MODE_PHY)
 #define is_ehci_tll_mode(x)	((x) == OMAP_EHCI_PORT_MODE_TLL)
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 79e11bb..889bd64 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -562,7 +562,6 @@
 #define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_PCI_EHCI_DEVICE			0
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
 #endif
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 14042ad..45b3f91 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -58,7 +58,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO	76 /* HSIC2 HUB #RESET */
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 3847a19..15b6927 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -95,9 +95,6 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-
 /* USB DFU support */
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
diff --git a/include/configs/duovero.h b/include/configs/duovero.h
index f142231..49875ff 100644
--- a/include/configs/duovero.h
+++ b/include/configs/duovero.h
@@ -25,8 +25,6 @@
 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
 
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
 
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 7cb3278..3b73bbc 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -134,8 +134,6 @@
 /* Enable Time Command */
 
 /* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_SMSC95XX
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
index bb66140..f695997 100644
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -97,7 +97,6 @@
  * USB
  */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 
 /* USB device */
 #define CONFIG_USB_ETHER
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 0c237a5..0c5becd 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -74,7 +74,6 @@
 
 /* EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	57
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define	CONFIG_USB_HOST_ETHER
 #define	CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
index 7a255a1..a9a2437 100644
--- a/include/configs/mvebu_armada-37xx.h
+++ b/include/configs/mvebu_armada-37xx.h
@@ -94,12 +94,7 @@
 #define CONFIG_NET_RETRY_COUNT	50
 #define CONFIG_PHY_MARVELL
 
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
-/* USB 3.0 */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
-					 3)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
 #define CONFIG_USB_HOST_ETHER
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index c29d7f9..2610460 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -100,12 +100,7 @@
 #define CONFIG_ARP_TIMEOUT	200
 #define CONFIG_NET_RETRY_COUNT	50
 
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
-/* USB 3.0 */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
-					 3)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
 #define CONFIG_USB_HOST_ETHER
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index e60b96f..615080c 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -199,7 +199,6 @@
 #define CONFIG_SYS_NAND_LARGEPAGE
 
 /* EHCI driver */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	1
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_MXC
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index afc7c5e..de9b5f5 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -190,7 +190,6 @@
 /* USB */
 #define CONFIG_USB_EHCI_EXYNOS
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0d48d4e..019c1b0 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -58,7 +58,6 @@
 
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 111aec5..2bd8f55 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -41,7 +41,6 @@
 
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	183
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
 
 /* commands to include */
 
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index e1263b6..32c1e67 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -17,8 +17,6 @@
  */
 
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
 
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index e7fac6d..d2b6c5d 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -52,7 +52,6 @@
 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
 
 /* USB UHH support options */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index c83e559..a687e40 100644
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -97,9 +97,6 @@
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
 
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h
index 7607f94..203c3bc 100644
--- a/include/configs/sama5d2_ptc.h
+++ b/include/configs/sama5d2_ptc.h
@@ -65,10 +65,6 @@
 /* USB */
 #define CONFIG_CMD_USB
 
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#endif
-
 /* USB device */
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h
index 4e0b9b1..8cbd44e 100644
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@@ -60,9 +60,6 @@
 #define CONFIG_TFTP_PORT
 #define CONFIG_TFTP_TSIZE
 
-/* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-
 /* MMC */
 #define CONFIG_GENERIC_ATMEL_MCI
 
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 9b514ff..ee669cb 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -311,7 +311,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_OHCI_SUNXI
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 #endif
 
 #ifdef CONFIG_USB_MUSB_SUNXI
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 0b87c9c..9d23754 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -67,7 +67,6 @@
 					115200}
 /* EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	25
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 
 /* commands to include */
 #define CONFIG_CMD_NAND		/* NAND support			*/
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index f994d2d..a60cddd 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -230,7 +230,6 @@
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	162
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 107a0f8..75d2065 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -63,6 +63,5 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 8cf9bac..0d61753 100644
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -65,7 +65,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 /* GPU needs setup */
 #define CONFIG_TEGRA_GPU
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index db1cc24..342ffbe 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -82,7 +82,6 @@
  */
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	10
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #define CONFIG_SYS_NAND_SELF_INIT
 #define CONFIG_SYS_NAND_ONFI_DETECTION
diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h
index 874fe34d..4c05576 100644
--- a/include/configs/tegra210-common.h
+++ b/include/configs/tegra210-common.h
@@ -68,7 +68,6 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 /* GPU needs setup */
 #define CONFIG_TEGRA_GPU
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index 6083847..c2096fb 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -64,6 +64,5 @@
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_EHCI_TXFIFO_THRESH	0x10
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
 
 #endif /* _TEGRA30_COMMON_H_ */
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index dc35b28..adff1b6 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -63,12 +63,6 @@
 
 #endif
 
-/* USB */
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#endif
-
 /* USB device */
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETH_RNDIS
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index b5ef8b5..02be817 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -131,7 +131,6 @@
  * USB configuration
  */
 #define CONFIG_USB_EHCI_PCI
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     12
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define CONFIG_SYS_USB_EVENT_POLL
 
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 8c7b6e6..d783915 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -5765,7 +5765,6 @@ CONFIG_SYS_USBD_BASE
 CONFIG_SYS_USB_BRGCLK
 CONFIG_SYS_USB_DEVICE
 CONFIG_SYS_USB_EHCI_CPU_INIT
-CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
 CONFIG_SYS_USB_EHCI_REGS_BASE
 CONFIG_SYS_USB_EVENT_POLL
 CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-- 
2.9.2



More information about the U-Boot mailing list