[U-Boot] [PATCH 14/20] configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boards

[Bin Meng]

Hi Stefan,

On Fri, Jun 16, 2017 at 9:31 PM, Bin Meng <bmeng.cn at gmail.com> wrote:
> Now that EHCD does not use CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS,
> remove it in all boards' config files.
>
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>
>  arch/arm/include/asm/ehci-omap.h    | 4 ----
>  include/configs/MPC8572DS.h         | 1 -
>  include/configs/cm_t54.h            | 1 -
>  include/configs/corvus.h            | 3 ---
>  include/configs/duovero.h           | 2 --
>  include/configs/exynos5-common.h    | 2 --
>  include/configs/ma5d4evk.h          | 1 -
>  include/configs/mcx.h               | 1 -
>  include/configs/mvebu_armada-37xx.h | 7 +------
>  include/configs/mvebu_armada-8k.h   | 7 +------
>  include/configs/mx35pdk.h           | 1 -
>  include/configs/odroid.h            | 1 -
>  include/configs/omap3_beagle.h      | 1 -
>  include/configs/omap3_overo.h       | 1 -
>  include/configs/omap4_panda.h       | 2 --
>  include/configs/omap5_uevm.h        | 1 -
>  include/configs/picosam9g45.h       | 3 ---
>  include/configs/sama5d2_ptc.h       | 4 ----
>  include/configs/snapper9g45.h       | 3 ---
>  include/configs/sunxi-common.h      | 1 -
>  include/configs/tam3517-common.h    | 1 -
>  include/configs/tao3530.h           | 1 -
>  include/configs/tegra114-common.h   | 1 -
>  include/configs/tegra124-common.h   | 1 -
>  include/configs/tegra20-common.h    | 1 -
>  include/configs/tegra210-common.h   | 1 -
>  include/configs/tegra30-common.h    | 1 -
>  include/configs/vinco.h             | 6 ------
>  include/configs/x86-common.h        | 1 -
>  scripts/config_whitelist.txt        | 1 -
>  30 files changed, 2 insertions(+), 60 deletions(-)
>

[snip]

> diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h
> index 7a255a1..a9a2437 100644
> --- a/include/configs/mvebu_armada-37xx.h
> +++ b/include/configs/mvebu_armada-37xx.h
> @@ -94,12 +94,7 @@
>  #define CONFIG_NET_RETRY_COUNT 50
>  #define CONFIG_PHY_MARVELL
>
> -/* USB 2.0 */
> -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
> -
> -/* USB 3.0 */
> -#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
> -                                        3)
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)

I strongly suspect here CONFIG_USB_MAX_CONTROLLER_COUNT is mistakenly
configured, unless each host controller only has 1 root port? Please
review.

>
>  /* USB ethernet */
>  #define CONFIG_USB_HOST_ETHER
> diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
> index c29d7f9..2610460 100644
> --- a/include/configs/mvebu_armada-8k.h
> +++ b/include/configs/mvebu_armada-8k.h
> @@ -100,12 +100,7 @@
>  #define CONFIG_ARP_TIMEOUT     200
>  #define CONFIG_NET_RETRY_COUNT 50
>
> -/* USB 2.0 */
> -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
> -
> -/* USB 3.0 */
> -#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
> -                                        3)
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
>

ditto.

>  /* USB ethernet */
>  #define CONFIG_USB_HOST_ETHER

[snip]

Regards,
Bin