[U-Boot] [PATCH v4 16/30] ARM: keystone2: Add additional fields used for DDR3 configuration
Franklin S Cooper Jr
fcooper at ti.com
Fri Jun 16 22:25:19 UTC 2017
Future boards will need to configure DDR3 registers in a slightly
different manner. Support this by defining additional variables and
defines that will be utilized later.
Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
arch/arm/mach-keystone/include/mach/ddr3.h | 14 ++++++++++++++
arch/arm/mach-keystone/include/mach/hardware.h | 3 +++
2 files changed, 17 insertions(+)
diff --git a/arch/arm/mach-keystone/include/mach/ddr3.h b/arch/arm/mach-keystone/include/mach/ddr3.h
index 5feffe8..93789fd 100644
--- a/arch/arm/mach-keystone/include/mach/ddr3.h
+++ b/arch/arm/mach-keystone/include/mach/ddr3.h
@@ -35,6 +35,20 @@ struct ddr3_phy_config {
unsigned int zq1cr1;
unsigned int zq2cr1;
unsigned int pir_v1;
+ unsigned int datx8_2_mask;
+ unsigned int datx8_2_val;
+ unsigned int datx8_3_mask;
+ unsigned int datx8_3_val;
+ unsigned int datx8_4_mask;
+ unsigned int datx8_4_val;
+ unsigned int datx8_5_mask;
+ unsigned int datx8_5_val;
+ unsigned int datx8_6_mask;
+ unsigned int datx8_6_val;
+ unsigned int datx8_7_mask;
+ unsigned int datx8_7_val;
+ unsigned int datx8_8_mask;
+ unsigned int datx8_8_val;
unsigned int pir_v2;
};
diff --git a/arch/arm/mach-keystone/include/mach/hardware.h b/arch/arm/mach-keystone/include/mach/hardware.h
index 38d0190..1969a10 100644
--- a/arch/arm/mach-keystone/include/mach/hardware.h
+++ b/arch/arm/mach-keystone/include/mach/hardware.h
@@ -52,6 +52,8 @@ typedef volatile unsigned int *dv_reg_p;
#define KS2_DDRPHY_ZQ2CR1_OFFSET 0x1A4
#define KS2_DDRPHY_ZQ3CR1_OFFSET 0x1B4
+#define KS2_DDRPHY_DATX8_2_OFFSET 0x240
+#define KS2_DDRPHY_DATX8_3_OFFSET 0x280
#define KS2_DDRPHY_DATX8_4_OFFSET 0x2C0
#define KS2_DDRPHY_DATX8_5_OFFSET 0x300
#define KS2_DDRPHY_DATX8_6_OFFSET 0x340
@@ -70,6 +72,7 @@ typedef volatile unsigned int *dv_reg_p;
#define PDQ_MASK 0x00000070
#define NOSRA_MASK 0x08000000
#define ECC_MASK 0x00000001
+#define DXEN_MASK 0x00000001
/* DDR3 definitions */
#define KS2_DDR3A_EMIF_CTRL_BASE 0x21010000
--
2.10.0
More information about the U-Boot
mailing list