[U-Boot] [PATCH 1/2] pinctrl: a3700: Fix uart2 group selection register mask

[Stefan Roese]

On 22.06.2017 11:13, make at marvell.com wrote:
> From: Ken Ma <make at marvell.com>
> 
> If north bridge selection register bit1 is clear, pins [10:8] are for
> SDIO0 Resetn, Wakeup, and PDN while if bit1 is set, pins [10:8]are for
> GPIO; when bit1 is clear, pin 9 and pin 10 can be used for uart2 RTSn
> and CTSn, so bit1 should be added to uart2 group and it must be set
> for both "gpio" and "uart" functions of uart2 group.
> 
> Signed-off-by: Ken Ma <make at marvell.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Kostya Porotchkin <kostap at marvell.com>
> Cc: Gregory CLEMENT <gregory.clement at free-electrons.com>
> Cc: Nadav Haklai <nadavh at marvell.com>
> Cc: Wilson Ding <dingwei at marvell.com>

Applied to u-boot-marvell/master.

Thanks,
Stefan