[U-Boot] i.MX6QP sd boot issue

[Jagan Teki]

+ ML

On Wed, Mar 1, 2017 at 6:23 PM, Jagan Teki <jagan at openedev.com> wrote:
> Hi Peng and All,
>
> I'm trying to boot from SD, on imx6qplus sabre board.
>
> - SW6: D1-D8 => 0100 0010
> - SD card on SD3
> - D12 with USB-to-Serial 115200 8N1
> - Power supply Output 5V
>
> Build:
> $  make mx6qpsabreauto_defconfig; make
> $ dd if=u-boot.imx of=/dev/sda bs=512 seek=2
>
> When I plug-in power, power supply slot D1, D2 are green and D3 glow
> red not able to get the log on uart.
>
> Any help?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.