[U-Boot] i.MX6QP sd boot issue

[Peng Fan]

Hi Jagan,

Did you put J3 to connect 1-2?

Jumper Boot Selection
1 - 2 Do not boot from SPI NOR (default)
2 - 3 Boot from SPI NOR


> -----Original Message-----
> From: Jagan Teki [mailto:jagan at openedev.com]
> Sent: Wednesday, March 01, 2017 8:56 PM
> To: u-boot at lists.denx.de
> Cc: Peng Fan <peng.fan at nxp.com>; Stefano Babic <sbabic at denx.de>
> Subject: Re: [U-Boot] i.MX6QP sd boot issue
> 
> + ML
> 
> On Wed, Mar 1, 2017 at 6:23 PM, Jagan Teki <jagan at openedev.com> wrote:
> > Hi Peng and All,
> >
> > I'm trying to boot from SD, on imx6qplus sabre board.
> >
> > - SW6: D1-D8 => 0100 0010
> > - SD card on SD3
> > - D12 with USB-to-Serial 115200 8N1
> > - Power supply Output 5V
> >
> > Build:
> > $  make mx6qpsabreauto_defconfig; make $ dd if=u-boot.imx of=/dev/sda
> > bs=512 seek=2
> >
> > When I plug-in power, power supply slot D1, D2 are green and D3 glow
> > red not able to get the log on uart.
> >
> > Any help?
> 
> thanks!
> --
> Jagan Teki
> Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream
> Maintainer Hyderabad, India.

Regards,
Peng.