[U-Boot] [PATCH v3 09/11] armv8: ls2080a: Drop early MMU for SPL build

[York Sun]

Early MMU improves performance especially on emulators. However, the
early MMU is left enabled after the first stage of SPL boot. Instead
of flushing D-cache and dealing with re-enabling MMU for the second
stage U-Boot, disabling it for SPL build simplifies the process. The
performance penalty is unnoticeable on the real hardware. As of now,
SPL boot is not supported by existing emulators. So this should have
no impact on emulators.

Signed-off-by: York Sun <york.sun at nxp.com>

---

Changes in v3:
  Add a patch to drop early MMU setup for LS2080A SPL build.

Changes in v2: None

 arch/arm/cpu/armv8/fsl-layerscape/spl.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 1dabdbb..73a8680 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -45,9 +45,6 @@ void board_init_f(ulong dummy)
 {
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
-#ifdef CONFIG_LS2080A
-	arch_cpu_init();
-#endif
 	board_early_init_f();
 	timer_init();
 #ifdef CONFIG_LS2080A
-- 
2.7.4