[U-Boot] [PATCH 2/2] arm: socfpga: Enable part command and EFI partition support for DE0-nano-SoC

[Frank Kunz]

Am 05.03.2017 um 18:17 schrieb Marek Vasut:
> On 03/05/2017 01:54 PM, Frank Kunz wrote:
>> Those features are used by distro boot with efi boot.
>>
>> Signed-off-by: Frank Kunz <mailinglists at kunz-im-inter.net>
>> ---
>> :100644 100644 b122135690... c22b54b48d... M   
>> configs/socfpga_de0_nano_soc_defconfig
>>  configs/socfpga_de0_nano_soc_defconfig | 7 ++++---
>>  1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/configs/socfpga_de0_nano_soc_defconfig
>> b/configs/socfpga_de0_nano_soc_defconfig
>> index b122135690..c22b54b48d 100644
>> --- a/configs/socfpga_de0_nano_soc_defconfig
>> +++ b/configs/socfpga_de0_nano_soc_defconfig
>> @@ -4,11 +4,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
>>  CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
>>  CONFIG_SPL_STACK_R_ADDR=0x00800000
>>  CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
>> -CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
>>  CONFIG_FIT=y
>>  CONFIG_SYS_CONSOLE_IS_IN_ENV=y
>>  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
>>  CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
>> +CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_nano_soc.dtb"
> 
> Is this move needed ? (no, it's not)

It is not needed, but "make savedefconfig" decided to do that. I do not
know how to overcome it.

> 
>>  CONFIG_VERSION_VARIABLE=y
>>  # CONFIG_DISPLAY_BOARDINFO is not set
>>  CONFIG_SPL=y
>> @@ -21,6 +21,7 @@ CONFIG_CMD_ASKENV=y
>>  CONFIG_CMD_GREPENV=y
>>  # CONFIG_CMD_FLASH is not set
>>  CONFIG_CMD_MMC=y
>> +CONFIG_CMD_PART=y
>>  CONFIG_CMD_SF=y
>>  CONFIG_CMD_SPI=y
>>  CONFIG_CMD_I2C=y
>> @@ -37,6 +38,8 @@ CONFIG_CMD_EXT4_WRITE=y
>>  CONFIG_CMD_FAT=y
>>  CONFIG_CMD_FS_GENERIC=y
>>  CONFIG_CMD_UBI=y
>> +CONFIG_EFI_PARTITION=y
>> +# CONFIG_SPL_EFI_PARTITION is not set
>>  CONFIG_SPL_DM=y
>>  CONFIG_DFU_MMC=y
>>  CONFIG_DM_GPIO=y
>> @@ -59,5 +62,3 @@ CONFIG_G_DNL_MANUFACTURER="terasic"
>>  CONFIG_G_DNL_VENDOR_NUM=0x0525
>>  CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
>>  CONFIG_USE_TINY_PRINTF=y
>> -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE=y
>> -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE=0xa2
> 
> +CC Dalon ...

Similar case here. "make savedefconfig" found that those two parameters
are already set by arch/arm/mach-socfpga/Kconfig and decided to remove
them here, I guess.

> 
>> \ No newline at end of file
>>
> 
>