[U-Boot] [PATCHv2 3/5] fsl PPA: add support PPA image loading from NAND and SD
Jaehoon Chung
jh80.chung at samsung.com
Wed Mar 8 11:06:27 UTC 2017
Hi,
On 03/08/2017 03:24 PM, Zhiqiang Hou wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> ---
> V2:
> - added flush cache operation after nand read
>
> arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 122 +++++++++++++++++++++++++++++++-
> 1 file changed, 121 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
> index b68e87d..4df70aa 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
> @@ -4,6 +4,7 @@
> * SPDX-License-Identifier: GPL-2.0+
> */
> #include <common.h>
> +#include <malloc.h>
> #include <config.h>
> #include <errno.h>
> #include <asm/system.h>
> @@ -21,9 +22,17 @@
> #include <fsl_validate.h>
> #endif
>
> +#ifdef CONFIG_SYS_LS_PPA_FW_IN_NAND
> +#include <nand.h>
> +#elif defined(CONFIG_SYS_LS_PPA_FW_IN_MMC)
> +#include <mmc.h>
> +#endif
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> int ppa_init(void)
> {
> - const void *ppa_fit_addr;
> + void *ppa_fit_addr;
> u32 *boot_loc_ptr_l, *boot_loc_ptr_h;
> int ret;
>
> @@ -34,10 +43,116 @@ int ppa_init(void)
>
> #ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
> ppa_fit_addr = (void *)CONFIG_SYS_LS_PPA_FW_ADDR;
> + debug("%s: PPA image load from XIP\n", __func__);
> +#else /* !CONFIG_SYS_LS_PPA_FW_IN_XIP */
> + size_t fw_length, fdt_header_len = sizeof(struct fdt_header);
> +
> + /* Copy PPA image from MMC/SD/NAND to allocated memory */
> +#ifdef CONFIG_SYS_LS_PPA_FW_IN_MMC
> + struct mmc *mmc;
> + int dev = CONFIG_SYS_MMC_ENV_DEV;
> + struct fdt_header *fitp;
> + u32 cnt;
> + u32 blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512;
> +
> + debug("%s: PPA image load from eMMC/SD\n", __func__);
> +
> + mmc_initialize(gd->bd);
It should be failed. need to check the return value.
> + mmc = find_mmc_device(dev);
> + if (!mmc) {
> + printf("PPA: MMC cannot find device for PPA firmware\n");
> + return -ENODEV;
> + }
> +
> + mmc_init(mmc);
ditto.
> +
> + fitp = malloc(roundup(fdt_header_len, 512));
> + if (!fitp) {
> + printf("PPA: malloc failed for FIT header(size 0x%zx)\n",
> + roundup(fdt_header_len, 512));
> + return -ENOMEM;
> + }
> +
> + cnt = DIV_ROUND_UP(fdt_header_len, 512);
> + debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n",
> + __func__, dev, blk, cnt);
> + ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp);
> + if (ret != cnt) {
> + free(fitp);
> + printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
> + CONFIG_SYS_LS_PPA_FW_ADDR);
> + return -EIO;
> + }
> +
> + /* flush cache after read */
> + flush_cache((ulong)fitp, cnt * 512);
> +
> + fw_length = fdt_totalsize(fitp);
> + free(fitp);
> +
> + fw_length = roundup(fw_length, 512);
> + ppa_fit_addr = malloc(fw_length);
> + if (!ppa_fit_addr) {
> + printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
> + fw_length);
> + return -ENOMEM;
> + }
> +
> + cnt = DIV_ROUND_UP(fw_length, 512);
> + debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n",
> + __func__, dev, blk, cnt);
> + ret = mmc->block_dev.block_read(&mmc->block_dev,
> + blk, cnt, ppa_fit_addr);
> + if (ret != cnt) {
> + free(ppa_fit_addr);
> + printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
> + CONFIG_SYS_LS_PPA_FW_ADDR);
> + return -EIO;
> + }
> +
> + /* flush cache after read */
> + flush_cache((ulong)ppa_fit_addr, cnt * 512);
> +
> +#elif defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
> + struct fdt_header fit;
> +
> + debug("%s: PPA image load from NAND\n", __func__);
> +
> + nand_init();
> + ret = nand_read(nand_info[0], (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
> + &fdt_header_len, (u_char *)&fit);
> + if (ret == -EUCLEAN) {
> + printf("NAND read of PPA FIT header at offset 0x%x failed\n",
> + CONFIG_SYS_LS_PPA_FW_ADDR);
> + return -EIO;
> + }
> +
> + fw_length = fdt_totalsize(&fit);
> +
> + ppa_fit_addr = malloc(fw_length);
> + if (!ppa_fit_addr) {
> + printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
> + fw_length);
> + return -ENOMEM;
> + }
> +
> + ret = nand_read(nand_info[0], (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
> + &fw_length, (u_char *)ppa_fit_addr);
> + if (ret == -EUCLEAN) {
> + free(ppa_fit_addr);
> + printf("NAND read of PPA firmware at offset 0x%x failed\n",
> + CONFIG_SYS_LS_PPA_FW_ADDR);
> + return -EIO;
> + }
> +
> + /* flush cache after read */
> + flush_cache((ulong)ppa_fit_addr, fw_length);
> #else
> #error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
> #endif
>
> +#endif
> +
> #ifdef CONFIG_CHAIN_OF_TRUST
> ppa_img_addr = (uintptr_t)ppa_fit_addr;
> if (fsl_check_boot_mode_secure() != 0) {
> @@ -65,5 +180,10 @@ int ppa_init(void)
> boot_loc_ptr_l, boot_loc_ptr_h);
> ret = sec_firmware_init(ppa_fit_addr, boot_loc_ptr_l, boot_loc_ptr_h);
>
> +#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \
> + defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
> + free(ppa_fit_addr);
> +#endif
> +
> return ret;
> }
>
More information about the U-Boot
mailing list