[U-Boot] [PATCHv2 3/5] fsl PPA: add support PPA image loading from NAND and SD

Z.Q. Hou zhiqiang.hou at nxp.com
Thu Mar 9 11:14:15 UTC 2017


Hi Jaehoon,

Thanks a lot for your comments!

> -----Original Message-----
> From: Jaehoon Chung [mailto:jh80.chung at samsung.com]
> Sent: 2017年3月8日 19:06
> To: Z.Q. Hou <zhiqiang.hou at nxp.com>; u-boot at lists.denx.de;
> oss at buserror.net; york sun <york.sun at nxp.com>; Mingkai.hu at freescale.com;
> sjg at chromium.org; Xiaobo Xie <xiaobo.xie at nxp.com>
> Subject: Re: [U-Boot] [PATCHv2 3/5] fsl PPA: add support PPA image loading
> from NAND and SD
> 
> Hi,
> 
> On 03/08/2017 03:24 PM, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> > ---
> > V2:
> >  - added flush cache operation after nand read
> >
> >  arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 122
> > +++++++++++++++++++++++++++++++-
> >  1 file changed, 121 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
> > b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
> > index b68e87d..4df70aa 100644
> > --- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
> > +++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
> > @@ -4,6 +4,7 @@
> >   * SPDX-License-Identifier:	GPL-2.0+
> >   */
> >  #include <common.h>
> > +#include <malloc.h>
> >  #include <config.h>
> >  #include <errno.h>
> >  #include <asm/system.h>
> > @@ -21,9 +22,17 @@
> >  #include <fsl_validate.h>
> >  #endif
> >
> > +#ifdef CONFIG_SYS_LS_PPA_FW_IN_NAND
> > +#include <nand.h>
> > +#elif defined(CONFIG_SYS_LS_PPA_FW_IN_MMC)
> > +#include <mmc.h>
> > +#endif
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> >  int ppa_init(void)
> >  {
> > -	const void *ppa_fit_addr;
> > +	void *ppa_fit_addr;
> >  	u32 *boot_loc_ptr_l, *boot_loc_ptr_h;
> >  	int ret;
> >
> > @@ -34,10 +43,116 @@ int ppa_init(void)
> >
> >  #ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
> >  	ppa_fit_addr = (void *)CONFIG_SYS_LS_PPA_FW_ADDR;
> > +	debug("%s: PPA image load from XIP\n", __func__); #else /*
> > +!CONFIG_SYS_LS_PPA_FW_IN_XIP */
> > +	size_t fw_length, fdt_header_len = sizeof(struct fdt_header);
> > +
> > +	/* Copy PPA image from MMC/SD/NAND to allocated memory */ #ifdef
> > +CONFIG_SYS_LS_PPA_FW_IN_MMC
> > +	struct mmc *mmc;
> > +	int dev = CONFIG_SYS_MMC_ENV_DEV;
> > +	struct fdt_header *fitp;
> > +	u32 cnt;
> > +	u32 blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512;
> > +
> > +	debug("%s: PPA image load from eMMC/SD\n", __func__);
> > +
> > +	mmc_initialize(gd->bd);
> 
> It should be failed. need to check the return value.

Yes, will add the return value check next version.

> > +	mmc = find_mmc_device(dev);
> > +	if (!mmc) {
> > +		printf("PPA: MMC cannot find device for PPA firmware\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	mmc_init(mmc);
> 
> ditto.

Yes, will add.

> > +
> > +	fitp = malloc(roundup(fdt_header_len, 512));
> > +	if (!fitp) {
> > +		printf("PPA: malloc failed for FIT header(size 0x%zx)\n",
> > +		       roundup(fdt_header_len, 512));
> > +		return -ENOMEM;
> > +	}
> > +
> > +	cnt = DIV_ROUND_UP(fdt_header_len, 512);
> > +	debug("%s: MMC read PPA FIT header: dev # %u, block # %u,
> count %u\n",
> > +	      __func__, dev, blk, cnt);
> > +	ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp);
> > +	if (ret != cnt) {
> > +		free(fitp);
> > +		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> > +
> > +	/* flush cache after read */
> > +	flush_cache((ulong)fitp, cnt * 512);
> > +
> > +	fw_length = fdt_totalsize(fitp);
> > +	free(fitp);
> > +
> > +	fw_length = roundup(fw_length, 512);
> > +	ppa_fit_addr = malloc(fw_length);
> > +	if (!ppa_fit_addr) {
> > +		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
> > +		       fw_length);
> > +		return -ENOMEM;
> > +	}
> > +
> > +	cnt = DIV_ROUND_UP(fw_length, 512);
> > +	debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n",
> > +	      __func__, dev, blk, cnt);
> > +	ret = mmc->block_dev.block_read(&mmc->block_dev,
> > +					blk, cnt, ppa_fit_addr);
> > +	if (ret != cnt) {
> > +		free(ppa_fit_addr);
> > +		printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> > +
> > +	/* flush cache after read */
> > +	flush_cache((ulong)ppa_fit_addr, cnt * 512);
> > +
> > +#elif defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
> > +	struct fdt_header fit;
> > +
> > +	debug("%s: PPA image load from NAND\n", __func__);
> > +
> > +	nand_init();
> > +	ret = nand_read(nand_info[0], (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
> > +		       &fdt_header_len, (u_char *)&fit);
> > +	if (ret == -EUCLEAN) {
> > +		printf("NAND read of PPA FIT header at offset 0x%x failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> > +
> > +	fw_length = fdt_totalsize(&fit);
> > +
> > +	ppa_fit_addr = malloc(fw_length);
> > +	if (!ppa_fit_addr) {
> > +		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
> > +		       fw_length);
> > +		return -ENOMEM;
> > +	}
> > +
> > +	ret = nand_read(nand_info[0], (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
> > +		       &fw_length, (u_char *)ppa_fit_addr);
> > +	if (ret == -EUCLEAN) {
> > +		free(ppa_fit_addr);
> > +		printf("NAND read of PPA firmware at offset 0x%x failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> > +
> > +	/* flush cache after read */
> > +	flush_cache((ulong)ppa_fit_addr, fw_length);
> >  #else
> >  #error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
> >  #endif
> >
> > +#endif
> > +
> >  #ifdef CONFIG_CHAIN_OF_TRUST
> >  	ppa_img_addr = (uintptr_t)ppa_fit_addr;
> >  	if (fsl_check_boot_mode_secure() != 0) { @@ -65,5 +180,10 @@ int
> > ppa_init(void)
> >  	      boot_loc_ptr_l, boot_loc_ptr_h);
> >  	ret = sec_firmware_init(ppa_fit_addr, boot_loc_ptr_l,
> > boot_loc_ptr_h);
> >
> > +#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \
> > +	defined(CONFIG_SYS_LS_PPA_FW_IN_NAND)
> > +	free(ppa_fit_addr);
> > +#endif
> > +
> >  	return ret;
> >  }
> >

Thanks,
Zhiqiang


More information about the U-Boot mailing list