[U-Boot] Ethernet not detecting on Odroid u3

Jaehoon Chung jh80.chung at samsung.com
Tue Mar 14 09:31:55 UTC 2017


Hi Anand,

On 03/14/2017 06:14 PM, Anand Moon wrote:
> Hi Siarhei/Jaehoon
> 
> On 14 March 2017 at 14:31, Jaehoon Chung <jh80.chung at samsung.com> wrote:
>> On 03/14/2017 04:52 PM, Siarhei Siamashka wrote:
>>> On Mon, 6 Mar 2017 12:18:50 +0200
>>> Siarhei Siamashka <siarhei.siamashka at gmail.com> wrote:
>>>
>>>> On Thu, 12 Jan 2017 14:02:48 +0530
>>>> Anand Moon <linux.amoon at gmail.com> wrote:
>>>>
>>>>> Hi All,
>>>>>
>>>>> I tried to compile the latest u-boot for Odroid U3.
>>>>> issue is that Ethernet is not able to detected.
>>>>>
>>>>> Please let me know what need to enable USB Ethernet
>>>>> to support tftp boot.
>>>>>
>>>>> Best Regards
>>>>> -Anand
>>>>>
>>>>> ------
>>>>> U-Boot 2017.01-02075-g4386feb-dirty (Jan 12 2017 - 06:17:08 +0000)
>>>>>
>>>>> CPU:   Exynos4412 @ 1 GHz
>>>>> Model: Odroid based on Exynos4412
>>>>> Board: Odroid based on Exynos4412
>>>>> Type:  u3
>>>>> DRAM:  2 GiB
>>>>> LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
>>>>> LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
>>>>> LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
>>>>> MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
>>>>> *** Warning - bad CRC, using default environment
>>>>>
>>>>> Net:   No ethernet found.
>>>>> Hit any key to stop autoboot:  0
>>>>> Odroid #
>>>>> Odroid #
>>>>> Odroid # usb start
>>>>> starting USB...
>>>>> USB0:   USB EHCI 1.00
>>>>> scanning bus 0 for devices... 1 USB Device(s) found
>>>>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>>>>> Odroid #
>>>>> Odroid #
>>>>> Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
>>>>> Odroid # usb start
>>>>> Odroid # usb info
>>>>> 1: Hub,  USB Revision 2.0
>>>>>  - u-boot EHCI Host Controller
>>>>>  - Class: Hub
>>>>>  - PacketSize: 64  Configurations: 1
>>>>>  - Vendor: 0x0000  Product 0x0000 Version 1.0
>>>>>    Configuration: 1
>>>>>    - Interfaces: 1 Self Powered 0mA
>>>>>      Interface: 0
>>>>>      - Alternate Setting 0, Endpoints: 1
>>>>>      - Class Hub
>>>>>      - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>>>>>
>>>>> Odroid # reset
>>>>
>>>> Hi Anand,
>>>>
>>>> It's an old problem and we have identified its root cause a long
>>>> time ago:
>>>>
>>>>     https://lists.denx.de/pipermail/u-boot/2015-October/231061.html
>>>>
>>>> Basically, a voltage regulator is not getting initialized because
>>>> a call to the board_usb_init() function was lost during the DM
>>>> conversion. You can try to compile U-Boot from my branch, it contains
>>>> the rebased fixes which I have been using all this time on my ODROID-X
>>>> board:
>>>>
>>>>     https://github.com/ssvb/u-boot/commits/20170306-unbreak-odroid
>>>>
>>>> I did all the initial investigation back in 2015, but tried to
>>>> delegate the actual bugfixing work to the ODROID board maintainer(s).
>>>> Apparently it did not fly and ODROID support is still broken.
>>>>
>>>> If you can test my branch and confirm that it works on your ODROID-U3,
>>>> then I can maybe spend some time on making cleaner patches and ensuring
>>>> that they reach the U-Boot git repository.
>>>>
>>>> Thanks!
>>>
>>> Hello again,
>>>
>>> Anand Moon, considering no reply to my post, do I understand it
>>> right that you are actually not very much interested in getting
>>> this particular problem resolved in U-Boot?
>>>
>>> These ODROID problems are relatively simple and don't require any
>>> special skills or considerable efforts to resolve. The only issue
>>> is that apparently almost nobody uses the mainline U-Boot on this
>>> hardware and nobody gives rats about having it usable out of the
>>> box.
>>>
>>> I only have an ODROID-X board, which is a rather early and
>>> short-lived revision. Again, if you or anybody else could step in
>>> and take care of testing the fixes on other ODROID boards (X2 and
>>> U3), then we could get ODROID boards working properly in the next
>>> U-Boot release.
>>>
>>>
>>> Jaehoon Chung, you seem to be listed as the current nominal ODROID
>>> boards maintainer. But you don't seem to be doing anything other
>>> than just making promises to check various things and then
>>> disappearing for months/years:
>>
>> Actually, i had forgotten this mail...When i check the patches, first i'm looking at patchwork.
>> And I'm remembering what i do and need. Right, it's my mistake for forgetting it.
>>
>> Disappearing for months/years? If i decided to do nothing, i might not reply anything to u-boot mailing list.
>> If you send the polite reminding ping mail, maybe i will really apologize to you. but now i don't have those mind.
>> You're regarding to me like nothing to do...
>>>
>>>     https://lists.denx.de/pipermail/u-boot/2017-January/277954.html
>>>     https://lists.denx.de/pipermail/u-boot/2015-October/231023.html
>>
>> I can't access this URL,,so i don't know what you added..
>>
>>>
>>> Could you please explain what's going on and what are your plans
>>> regarding ODROID boards support in U-Boot?
>>
>> I'm preparing to covert to DM from legacy..For converting DM, I'm doing step by step for samsung SoCs.
>> Goni -> Universal210 - > Trats -> Trats2 -> Odroid also..
>> You can see my patches for goni, universal210, trats..
>>
>> I'm not sure this problem is fixed or not..if you want to fix it, i will do it..but not right now.
>> I keep going my current task..
>>
>> Best Regards,
>> Jaehoon Chung
>>
> 
> I might have missed early email. I would like help resolve this issue
> and investigate on the inputs you have shared.

I didn't receive some email about this...I can't find you and Siarhei's mail threads in my mailbox.

Best Regards,
Jaehoon Chung

> 
> Best Regards
> -Anand Moon
> 
> 



More information about the U-Boot mailing list