[U-Boot] [PATCH v1 00/41] Add PPv2.2 support to the mvpp2 ethernet driver and enable it for A7k/8k

Stefan Roese sr at denx.de
Tue Mar 21 14:27:21 UTC 2017


This patchset does the following things:

- It brings the latest Linux changes from the mvpp2 ethernet driver done
  by Thomas Petazzoni to the U-Boot version of this driver. This enables
  the usage of this driver on the new Marvell Armada 7k / 8k ARMv8 SoCs.

- This driver is enabled for the currently available Armada 7k / 8k
  boards and the necessary configuration is done to the config header.

Thanks,
Stefan


Stefan Roese (18):
  bitops.h: Include bitsperlong.h as needed for GENMASK_ULL
  net: mvpp2: Round up top tx buffer boundaries for dcache ops
  net: mvpp2: enable building on 64-bit platforms (more U-Boot specific)
  net: mvpp2: Add MDIO support for PPv2.2
  net: mvpp2: Move probe function from MISC to ETH DM driver
  net: mvpp2.c: Clear all buffer / descriptor areas before usage
  net: mvpp2: Enable compilation for Armada 7K/8K platforms
  arm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver
  net: mvpp2: Handle eth device naming in multi-CP case correctly
  net: mvpp2: Add remove function that is called before the OS is
    started
  net: mvpp2: Add RX and TX FIFO configuration for PPv2.2
  net: include/phy.h: Add new PHY interface modes
  net: mvpp2: Add Group-of-Ports and Net-Compex configuration for PPv2.2
  net: mvpp2: Enable PHY polling mode on PPv2.2
  net: mvpp2: Configure SMI PHY address needed for PHY polling
  net: mvpp2: Remove unreferenced in_use_thresh from struct
    mvpp2_bm_pool
  arm64: mvebu: armada-7040-db.dts: Change eth1 speed from 2.5G to 1G
  arm64: mvebu: Enable CONFIG_PHY_MARVELL in Armada7k/8k-DB defconfig

Thomas Petazzoni (23):
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: remove unused register definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: use "dma" instead of "phys" where appropriate
  net: mvpp2: remove support for buffer header
  net: mvpp2: store physical address of buffer in rx_desc->buf_cookie
  net: mvpp2: add and use accessors for TX/RX descriptors
  net: mvpp2: add hw_version field in "struct mvpp2"
  net: mvpp2: introduce an intermediate union for the TX/RX descriptors
  net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors
  net: mvpp2: adjust the allocation/free of BM pools for PPv2.2
  net: mvpp2: adapt the mvpp2_rxq_*_pool_set functions to PPv2.2
  net: mvpp2: adapt mvpp2_defaults_set() to PPv2.2
  net: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2
  net: mvpp2: handle register mapping and access for PPv2.2
  net: mvpp2: handle misc PPv2.1/PPv2.2 differences
  net: mvpp2: add AXI bridge initialization for PPv2.2
  net: mvpp2: rework RXQ interrupt group initialization for PPv2.2
  net: mvpp2: adapt rxq distribution to PPv2.2
  net: mvpp2: finally add the PPv2.2 compatible string
  arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K

 arch/arm/dts/armada-7040-db.dts       |   27 +-
 arch/arm/dts/armada-8040-db.dts       |   16 +
 arch/arm/dts/armada-cp110-master.dtsi |   37 +
 arch/arm/dts/armada-cp110-slave.dtsi  |   37 +
 configs/mvebu_db-88f7040_defconfig    |    3 +-
 configs/mvebu_db-88f8040_defconfig    |    3 +-
 drivers/net/Kconfig                   |    6 +-
 drivers/net/mvpp2.c                   | 2226 ++++++++++++++++++++++++++++-----
 include/configs/mvebu_armada-8k.h     |    8 +
 include/linux/bitops.h                |    1 +
 include/phy.h                         |    6 +
 11 files changed, 2062 insertions(+), 308 deletions(-)

-- 
2.12.0



More information about the U-Boot mailing list