[U-Boot] [PATCH 2/3] arm: mvebu: theadorable: Add board-specific PEX detection pulse width

[Stefan Roese]

On 10.03.2017 15:40, Stefan Roese wrote:
> Define a board-specific detection pulse-width array for the SerDes PCIe
> interfaces. If not defined in the board code, the default of currently 2
> is used. Values from 0...3 are possible (2 bits).
>
> In this case of the theadorable board, PEX interface 0 needs a value
> of 0 for the detection pulse width so that the PCIe device (Atheros
> WLAN PCIe device) is consistantly detected.
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Adam Shobash <adams at marvell.com>
> Cc: Nadav Haklai <nadavh at marvell.com>
> Cc: Konstantin Porotchkin <kostap at marvell.com>

Applied to u-boot-marvell/master.

Thanks,
Stefan