[U-Boot] i.MX6QP sd boot issue

[Jagan Teki]

Hi Peng,

On Thu, Mar 2, 2017 at 6:21 AM, Peng Fan <peng.fan at nxp.com> wrote:
>
>
>> -----Original Message-----
>> From: Jagan Teki [mailto:jagan at openedev.com]
>> Sent: Wednesday, March 01, 2017 10:12 PM
>> To: Peng Fan <peng.fan at nxp.com>
>> Cc: Jagan Teki <jagan at openedev.com>; u-boot at lists.denx.de
>> Subject: Re: [U-Boot] i.MX6QP sd boot issue
>>
>> On Wed, Mar 1, 2017 at 6:28 PM, Peng Fan <peng.fan at nxp.com> wrote:
>> > Hi Jagan,
>> >
>> > Did you put J3 to connect 1-2?
>>
>> What is J3, I couldn't find it. I saw J1 PCIe connector and J2 Headphone Jack.
>> Can you point me J3.
>
> There is J2 and J3 beside the boot mode switch s2.
> I only have a base board. So J2 needs to be 1-2 connected. J3 1-2 connected to not boot from SPI.
>
> You could have a try.
> If your board runs into serial download mode, then J3 maybe wrong connection. If your board does not run into serial download mode, J2 maybe wrong connection.

I still not able to boot from SD with mx6qpsabreauto_defconfig, did
you able to boot from SD?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.