[U-Boot] [PATCH 09/17] pcm058: Fix unused variable warnings

[Tom Rini]

The variable nfc_pads is only referenced when CONFIG_CMD_NAND is set,
add a gaurd.  The variable gpio_pads is never referenced, drop it.  The
variable usdhc4_pads are only referenced when we do not have
CONFIG_CMD_NAND set and we are not doing an SPL build, modify the
existing guard.

Cc: Stefano Babic <sbabic at denx.de>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 board/phytec/pcm058/pcm058.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/board/phytec/pcm058/pcm058.c b/board/phytec/pcm058/pcm058.c
index c3607daf4605..3dc8cbd6a50b 100644
--- a/board/phytec/pcm058/pcm058.c
+++ b/board/phytec/pcm058/pcm058.c
@@ -108,6 +108,7 @@ static iomux_v3_cfg_t const ecspi1_pads[] = {
 	MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+#ifdef CONFIG_CMD_NAND
 /* NAND */
 static iomux_v3_cfg_t const nfc_pads[] = {
 	MX6_PAD_NANDF_CLE__NAND_CLE     | MUX_PAD_CTRL(NAND_PAD_CTRL),
@@ -130,11 +131,7 @@ static iomux_v3_cfg_t const nfc_pads[] = {
 	MX6_PAD_NANDF_D7__NAND_DATA07   | MUX_PAD_CTRL(NAND_PAD_CTRL),
 	MX6_PAD_SD4_DAT0__NAND_DQS	| MUX_PAD_CTRL(NAND_PAD_CTRL),
 };
-
-
-/* GPIOS */
-static iomux_v3_cfg_t const gpios_pads[] = {
-};
+#endif
 
 static struct i2c_pads_info i2c_pad_info2 = {
 	.scl = {
@@ -167,7 +164,7 @@ static iomux_v3_cfg_t const usdhc1_pads[] = {
 	MX6_PAD_EIM_BCLK__GPIO6_IO31	| MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
-#ifndef CONFIG_CMD_NAND
+#if !defined(CONFIG_CMD_NAND) && !defined(CONFIG_SPL_BUILD)
 static iomux_v3_cfg_t const usdhc4_pads[] = {
 	MX6_PAD_SD4_CLK__SD4_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6_PAD_SD4_CMD__SD4_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
-- 
1.9.1