[U-Boot] [PATCH v2 0/4] sunxi: Add support for NanoPi M1

[Maxime Ripard]

Hi Mylene,

On Wed, May 10, 2017 at 08:26:06AM +0200, Mylène Josserand wrote:
> Here is a V2 of the support of the Sun8i NanoPi M1 platform.
> I created a patch serie instead on a standalone patch
> because the kernel device tree for Nanopi uses a dtsi file
> that does not exist in u-boot. This dtsi will be added in
> this serie.
> 
> Changes since V1:
> 	- Added the NanoPi dtsi from the kernel device tree
> 	- Updated the NanoPi Neo device tree to use the dtsi
> 	- Updated the dtsi from the kernel reference to remove the
> 	gpio-keys to be able to use this dtsi file for the
> 	NanoPi Neo Air. I will send this patch to the kernel if this
> 	modification make sense.
> 	- Updated the NanoPi Neo Air to use the dtsi
> 
> Patch01: Add the support of the NanoPi M1 platform. Based from the kernel
> device tree so the NanoPi dtsi file is also added.
> Patch02: Update the NanoPi Neo to use the dtsi to be close to the one from
> the kernel.
> Patch03: Move the gpio-keys to the dts file to have a generic dtsi file and
> be able to use it for the NanoPi Neo Air.
> Patch04: Update the NanoPi Neo Air device tree file to use the dtsi one.

(we already discussed this face to face, but I'm sending it on the ML
for reference).

While all those patches are good, they should be contributed to
upstream's kernel first. Once they are merged, you can then sync
U-Boot to use whatever has been merged.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170510/14f1c568/attachment.sig>