[U-Boot] [PATCH v2 0/4] sunxi: Add support for NanoPi M1

[Jagan Teki]

On Wed, May 10, 2017 at 11:56 AM, Mylène Josserand
<mylene.josserand at free-electrons.com> wrote:
> Hi everyone,
>
> Here is a V2 of the support of the Sun8i NanoPi M1 platform.
> I created a patch serie instead on a standalone patch
> because the kernel device tree for Nanopi uses a dtsi file
> that does not exist in u-boot. This dtsi will be added in
> this serie.
>
> Changes since V1:
>         - Added the NanoPi dtsi from the kernel device tree
>         - Updated the NanoPi Neo device tree to use the dtsi
>         - Updated the dtsi from the kernel reference to remove the
>         gpio-keys to be able to use this dtsi file for the
>         NanoPi Neo Air. I will send this patch to the kernel if this
>         modification make sense.
>         - Updated the NanoPi Neo Air to use the dtsi
>
> Patch01: Add the support of the NanoPi M1 platform. Based from the kernel
> device tree so the NanoPi dtsi file is also added.
> Patch02: Update the NanoPi Neo to use the dtsi to be close to the one from
> the kernel.
> Patch03: Move the gpio-keys to the dts file to have a generic dtsi file and
> be able to use it for the NanoPi Neo Air.
> Patch04: Update the NanoPi Neo Air device tree file to use the dtsi one.
>
> Thank you in advance for your reviews/comments.
>
> Best regards,
>
> Mylène Josserand (4):
>   sunxi: Add support for NanoPi M1
>   sunxi: Update NanoPi Neo to use dtsi

These two are IN at linux-next and look good.

Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.