[U-Boot] [PATCH v2 0/4] sunxi: Add support for NanoPi M1

[Jagan Teki]

On Tue, May 23, 2017 at 10:51 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> On Wed, May 10, 2017 at 11:56 AM, Mylène Josserand
> <mylene.josserand at free-electrons.com> wrote:
>> Hi everyone,
>>
>> Here is a V2 of the support of the Sun8i NanoPi M1 platform.
>> I created a patch serie instead on a standalone patch
>> because the kernel device tree for Nanopi uses a dtsi file
>> that does not exist in u-boot. This dtsi will be added in
>> this serie.
>>
>> Changes since V1:
>>         - Added the NanoPi dtsi from the kernel device tree
>>         - Updated the NanoPi Neo device tree to use the dtsi
>>         - Updated the dtsi from the kernel reference to remove the
>>         gpio-keys to be able to use this dtsi file for the
>>         NanoPi Neo Air. I will send this patch to the kernel if this
>>         modification make sense.
>>         - Updated the NanoPi Neo Air to use the dtsi
>>
>> Patch01: Add the support of the NanoPi M1 platform. Based from the kernel
>> device tree so the NanoPi dtsi file is also added.
>> Patch02: Update the NanoPi Neo to use the dtsi to be close to the one from
>> the kernel.
>> Patch03: Move the gpio-keys to the dts file to have a generic dtsi file and
>> be able to use it for the NanoPi Neo Air.
>> Patch04: Update the NanoPi Neo Air device tree file to use the dtsi one.
>>
>> Thank you in advance for your reviews/comments.
>>
>> Best regards,
>>
>> Mylène Josserand (4):
>>   sunxi: Add support for NanoPi M1
>>   sunxi: Update NanoPi Neo to use dtsi
>
> These two are IN at linux-next and look good.
>
> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>

First two patches,

Applied to u-boot-sunxi/master

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.